[RFT PATCH 0/4] Add support for PECI Nuvoton

[Tomer Maimon]

Hi Iwona,

Thanks a lot for upstream Nuvoton PECI driver.

We will test the driver in a day or two and let you know.

Best regards,

Tomer

On Fri, 16 Jun 2023 at 22:35, Iwona Winiarska <iwona.winiarska at intel.com> wrote:
>
> Hi!
>
> This series is based on patches that were sent by Tomer Maimon from
> Nuvoton [1].
> Similar to Aspeed driver, I removed vendor-specific properties that
> were not used (as in, default values were used in all of the available
> DTS files). If there is a use-case for such properties, they can be
> added in a separate series.
> I wasn't able to test it on a real hardware so I would like to ask for
> help to test it on Nuvoton systems.
>
> Thanks
> -Iwona
>
> [1] https://lore.kernel.org/openbmc/CAP6Zq1jnbQ8k9VEyf9WgVq5DRrEzf5V6kaYP30S7g9BV9jKtaQ@mail.gmail.com/
>
> Iwona Winiarska (2):
>   ARM: dts: nuvoton: Add PECI controller node
>   arm64: dts: nuvoton: Add PECI controller node
>
> Tomer Maimon (2):
>   dt-bindings: Add bindings for peci-npcm
>   peci: Add peci-npcm controller driver
>
>  .../devicetree/bindings/peci/peci-npcm.yaml   |  56 ++++
>  arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi |   9 +
>  .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi   |   9 +
>  drivers/peci/controller/Kconfig               |  16 +
>  drivers/peci/controller/Makefile              |   1 +
>  drivers/peci/controller/peci-npcm.c           | 298 ++++++++++++++++++
>  6 files changed, 389 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/peci/peci-npcm.yaml
>  create mode 100644 drivers/peci/controller/peci-npcm.c
>
> --
> 2.40.1
>