[PATCH] usb: gadget: aspeed: fixup vhub port irq handling

rentao.bupt at gmail.com rentao.bupt at gmail.com
Thu May 28 11:11:54 AEST 2020


From: Tao Ren <rentao.bupt at gmail.com>

This is a follow-on patch for commit a23be4ed8f48 ("usb: gadget: aspeed:
improve vhub port irq handling"): for_each_set_bit() is replaced with
simple for() loop because for() loop runs faster on ASPEED BMC.

Signed-off-by: Tao Ren <rentao.bupt at gmail.com>
---
 drivers/usb/gadget/udc/aspeed-vhub/core.c | 10 +++-------
 drivers/usb/gadget/udc/aspeed-vhub/vhub.h |  3 +++
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c
index cdf96911e4b1..be7bb64e3594 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/core.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c
@@ -135,13 +135,9 @@ static irqreturn_t ast_vhub_irq(int irq, void *data)
 
 	/* Handle device interrupts */
 	if (istat & vhub->port_irq_mask) {
-		unsigned long bitmap = istat;
-		int offset = VHUB_IRQ_DEV1_BIT;
-		int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports;
-
-		for_each_set_bit_from(offset, &bitmap, size) {
-			i = offset - VHUB_IRQ_DEV1_BIT;
-			ast_vhub_dev_irq(&vhub->ports[i].dev);
+		for (i = 0; i < vhub->max_ports; i++) {
+			if (istat & VHUB_DEV_IRQ(i))
+				ast_vhub_dev_irq(&vhub->ports[i].dev);
 		}
 	}
 
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
index 2e5a1ef14a75..87a5dea12d3c 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
+++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h
@@ -67,6 +67,9 @@
 #define VHUB_IRQ_HUB_EP0_SETUP			(1 << 0)
 #define VHUB_IRQ_ACK_ALL			0x1ff
 
+/* Downstream device IRQ mask. */
+#define VHUB_DEV_IRQ(n)				(VHUB_IRQ_DEVICE1 << (n))
+
 /* SW reset reg */
 #define VHUB_SW_RESET_EP_POOL			(1 << 9)
 #define VHUB_SW_RESET_DMA_CONTROLLER		(1 << 8)
-- 
2.17.1



More information about the openbmc mailing list