[PATCH v11 11/14] mfd: intel-peci-client: Add Intel PECI client driver
Lee Jones
lee.jones at linaro.org
Tue Dec 17 03:01:45 AEDT 2019
On Wed, 11 Dec 2019, Jae Hyun Yoo wrote:
> This commit adds Intel PECI client driver.
>
> Cc: Lee Jones <lee.jones at linaro.org>
> Cc: Randy Dunlap <rdunlap at infradead.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Andrew Jeffery <andrew at aj.id.au>
> Cc: James Feist <james.feist at linux.intel.com>
> Cc: Jason M Biils <jason.m.bills at linux.intel.com>
> Cc: Joel Stanley <joel at jms.id.au>
> Cc: Vernon Mauery <vernon.mauery at linux.intel.com>
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> ---
> Changes since v10:
> - Fixed minor style issues.
>
> drivers/mfd/Kconfig | 17 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/intel-peci-client.c | 149 ++++++++++++++++++++++++++
> include/linux/mfd/intel-peci-client.h | 117 ++++++++++++++++++++
> 4 files changed, 284 insertions(+)
> create mode 100644 drivers/mfd/intel-peci-client.c
> create mode 100644 include/linux/mfd/intel-peci-client.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 420900852166..7022e54a4703 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -632,6 +632,23 @@ config MFD_INTEL_MSIC
> Passage) chip. This chip embeds audio, battery, GPIO, etc.
> devices used in Intel Medfield platforms.
>
> +config MFD_INTEL_PECI_CLIENT
> + tristate "Intel PECI client"
> + depends on (PECI || COMPILE_TEST)
> + select MFD_CORE
> + help
> + If you say yes to this option, support will be included for the
> + Intel PECI (Platform Environment Control Interface) client. PECI is a
> + one-wire bus interface that provides a communication channel from PECI
> + clients in Intel processors and chipset components to external
> + monitoring or control devices.
> +
> + Additional drivers must be enabled in order to use the functionality
> + of the device.
> +
> + This driver can also be built as a module. If so, the module
> + will be called intel-peci-client.
> +
> config MFD_IPAQ_MICRO
> bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
> depends on SA1100_H3100 || SA1100_H3600
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index aed99f08739f..91c6fda5cec6 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -211,6 +211,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
> obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
> obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
> obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> +obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
> diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
> new file mode 100644
> index 000000000000..18bf0af0e09e
> --- /dev/null
> +++ b/drivers/mfd/intel-peci-client.c
> @@ -0,0 +1,149 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2018-2019 Intel Corporation
> +
> +#include <linux/bitfield.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/intel-peci-client.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/peci.h>
> +
> +#define CPU_ID_MODEL_MASK GENMASK(7, 4)
> +#define CPU_ID_FAMILY_MASK GENMASK(11, 8)
> +#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16)
> +#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
> +
> +#define LOWER_NIBBLE_MASK GENMASK(3, 0)
> +#define UPPER_NIBBLE_MASK GENMASK(7, 4)
> +#define LOWER_BYTE_MASK GENMASK(7, 0)
> +#define UPPER_BYTE_MASK GENMASK(16, 8)
> +
> +static struct mfd_cell peci_functions[] = {
> + { .name = "peci-cputemp", },
> + { .name = "peci-dimmtemp", },
> + /* TODO: Add additional PECI sideband functions into here */
No need for this comment. It's implied.
> +};
> +
> +static const struct cpu_gen_info cpu_gen_info_table[] = {
> + { /* Haswell Xeon */
> + .family = 6, /* Family code */
Nit: Why don't you just define the number, instead of feeling the need
to further clarify by providing a comment?
> + .model = INTEL_FAM6_HASWELL_X,
> + .core_max = CORE_MAX_ON_HSX,
> + .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
> + .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
> + { /* Broadwell Xeon */
> + .family = 6, /* Family code */
> + .model = INTEL_FAM6_BROADWELL_X,
> + .core_max = CORE_MAX_ON_BDX,
> + .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
> + .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
> + { /* Skylake Xeon */
> + .family = 6, /* Family code */
> + .model = INTEL_FAM6_SKYLAKE_X,
> + .core_max = CORE_MAX_ON_SKX,
> + .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
> + .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
> + { /* Skylake Xeon D */
> + .family = 6, /* Family code */
> + .model = INTEL_FAM6_SKYLAKE_XD,
> + .core_max = CORE_MAX_ON_SKXD,
> + .chan_rank_max = CHAN_RANK_MAX_ON_SKXD,
> + .dimm_idx_max = DIMM_IDX_MAX_ON_SKXD },
> +};
> +
> +static int peci_client_get_cpu_gen_info(struct peci_client_manager *priv)
> +{
> + struct device *dev = &priv->client->dev;
> + u32 cpu_id;
> + u16 family;
> + u8 model;
> + int ret;
> + int i;
> +
> + ret = peci_get_cpu_id(priv->client->adapter, priv->client->addr,
> + &cpu_id);
> + if (ret)
> + return ret;
> +
> + family = FIELD_PREP(LOWER_BYTE_MASK,
> + FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id)) |
> + FIELD_PREP(UPPER_BYTE_MASK,
> + FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id));
> + model = FIELD_PREP(LOWER_NIBBLE_MASK,
> + FIELD_GET(CPU_ID_MODEL_MASK, cpu_id)) |
> + FIELD_PREP(UPPER_NIBBLE_MASK,
> + FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id));
> +
> + for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
> + const struct cpu_gen_info *cpu_info = &cpu_gen_info_table[i];
> +
> + if (family == cpu_info->family && model == cpu_info->model) {
> + priv->gen_info = cpu_info;
> + break;
> + }
> + }
> +
> + if (!priv->gen_info) {
> + dev_err(dev, "Can't support this CPU: 0x%x\n", cpu_id);
> + ret = -ENODEV;
> + }
> +
> + return ret;
> +}
> +
> +static int peci_client_probe(struct peci_client *client)
> +{
> + struct device *dev = &client->dev;
> + struct peci_client_manager *priv;
> + uint cpu_no;
> + int ret;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, priv);
> + priv->client = client;
> + cpu_no = client->addr - PECI_BASE_ADDR;
> +
> + ret = peci_client_get_cpu_gen_info(priv);
> + if (ret)
> + return ret;
> +
> + ret = devm_mfd_add_devices(dev, cpu_no, peci_functions,
> + ARRAY_SIZE(peci_functions), NULL, 0, NULL);
> + if (ret < 0) {
> + dev_err(dev, "Failed to register child devices: %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_OF)
#ifdef CONFIG_OF
> +static const struct of_device_id peci_client_of_table[] = {
> + { .compatible = "intel,peci-client" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, peci_client_of_table);
> +#endif /* CONFIG_OF */
Please remove this comment. It doesn't provide anything here.
> +static const struct peci_device_id peci_client_ids[] = {
> + { .name = "peci-client" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(peci, peci_client_ids);
Is this a requirement? If so, why?
We're trying to get rid of unnecessary tables.
Please grep for "probe_new".
> +static struct peci_driver peci_client_driver = {
> + .probe = peci_client_probe,
> + .id_table = peci_client_ids,
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = of_match_ptr(peci_client_of_table),
> + },
> +};
> +module_peci_driver(peci_client_driver);
> +
> +MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>");
> +MODULE_DESCRIPTION("PECI client driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
> new file mode 100644
> index 000000000000..9854303bbc26
> --- /dev/null
> +++ b/include/linux/mfd/intel-peci-client.h
> @@ -0,0 +1,117 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2018-2019 Intel Corporation */
> +
> +#ifndef __LINUX_MFD_INTEL_PECI_CLIENT_H
> +#define __LINUX_MFD_INTEL_PECI_CLIENT_H
> +
> +#include <linux/peci.h>
> +
> +#if IS_ENABLED(CONFIG_X86)
> +#include <asm/intel-family.h>
> +#else
> +/*
> + * Architectures other than x86 cannot include the header file so define these
> + * at here. These are needed for detecting type of client x86 CPUs behind a PECI
> + * connection.
> + */
> +#define INTEL_FAM6_HASWELL_X 0x3F
> +#define INTEL_FAM6_BROADWELL_X 0x4F
> +#define INTEL_FAM6_SKYLAKE_X 0x55
> +#define INTEL_FAM6_SKYLAKE_XD 0x56
> +#endif
> +
> +#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
> +#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
> +#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
> +
> +#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
> +#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
> +#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
> +
> +#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
> +#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
> +#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
> +
> +#define CORE_MAX_ON_SKXD 16 /* Max number of cores on Skylake D */
> +#define CHAN_RANK_MAX_ON_SKXD 2 /* Max number of channel ranks on Skylake D */
> +#define DIMM_IDX_MAX_ON_SKXD 2 /* Max DIMM index per channel on Skylake D */
> +
> +#define CORE_NUMS_MAX CORE_MAX_ON_SKX
> +#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
> +#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
> +#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
> +
> +/**
> + * struct cpu_gen_info - CPU generation specific information
> + * @family: CPU family ID
> + * @model: CPU model
> + * @core_max: max number of cores
> + * @chan_rank_max: max number of channel ranks
> + * @dimm_idx_max: max number of DIMM indices
> + *
> + * CPU generation specific information to identify maximum number of cores and
> + * DIMM slots.
> + */
> +struct cpu_gen_info {
> + u16 family;
> + u8 model;
> + uint core_max;
> + uint chan_rank_max;
> + uint dimm_idx_max;
> +};
> +
> +/**
> + * struct peci_client_manager - PECI client manager information
> + * @client; pointer to the PECI client
> + * @name: PECI client manager name
> + * @gen_info: CPU generation info of the detected CPU
> + *
> + * PECI client manager information for managing PECI sideband functions on a CPU
> + * client.
> + */
> +struct peci_client_manager {
> + struct peci_client *client;
> + char name[PECI_NAME_SIZE];
> + const struct cpu_gen_info *gen_info;
> +};
> +
> +/**
> + * peci_client_read_package_config - read from the Package Configuration Space
> + * @priv: driver private data structure
> + * @index: encoding index for the requested service
> + * @param: parameter to specify the exact data being requested
> + * @data: data buffer to store the result
> + * Context: can sleep
> + *
> + * A generic PECI command that provides read access to the
> + * "Package Configuration Space" that is maintained by the PCU, including
> + * various power and thermal management functions. Typical PCS read services
> + * supported by the processor may include access to temperature data, energy
> + * status, run time information, DIMM temperatures and so on.
> + *
> + * Return: zero on success, else a negative error code.
> + */
> +static inline int
> +peci_client_read_package_config(struct peci_client_manager *priv,
> + u8 index, u16 param, u8 *data)
> +{
> + struct peci_rd_pkg_cfg_msg msg;
> + int ret;
> +
> + msg.addr = priv->client->addr;
> + msg.index = index;
> + msg.param = param;
> + msg.rx_len = 4;
> +
> + ret = peci_command(priv->client->adapter, PECI_CMD_RD_PKG_CFG, &msg);
> + if (msg.cc != PECI_DEV_CC_SUCCESS)
> + ret = -EAGAIN;
> + if (ret)
> + return ret;
> +
> + memcpy(data, msg.pkg_config, 4);
> +
> + return 0;
> +}
Where is this function used?
> +#endif /* __LINUX_MFD_INTEL_PECI_CLIENT_H */
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the openbmc
mailing list