printk: console [ttyS0] enabled
printk: bootconsole [udbg0] disabled
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
rcu: Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 1 CPU
devtmpfs: initialized
Duplicate name in PowerPC,750, renamed to "l2-cache#1"
Duplicate name in pci, renamed to "mac-io#1"
Duplicate name in pci, renamed to "pccard#1"
Found Grackle (MPC106) PCI host bridge at 0x0000000080000000. Firmware bus number: 0->0
PCI host bridge /pci (primary) ranges:
  IO 0x00000000fe000000..0x00000000fe7fffff -> 0x0000000000000000
 MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000
 MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 512 (order: 2, 16384 bytes, linear)
NET: Registered protocol family 16
PMU i2c /pci/mac-io/via-pmu
 channel 1 bus <multibus>
 channel 2 bus <multibus>
PCI: Probing PCI hardware
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x7fffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfdffffff] (bus address [0x00000000-0x00ffffff])
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfcffffff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
pci 0000:00:00.0: [1057:0002] type 00 class 0x060000
pci 0000:00:0d.0: [106b:0017] type 00 class 0xff0000
pci 0000:00:0d.0: reg 0x10: [mem 0xf4000000-0xf407ffff]
pci 0000:00:10.0: [106b:0017] type 00 class 0xff0000
pci 0000:00:10.0: reg 0x10: [mem 0xf3000000-0xf307ffff]
pci 0000:00:11.0: [1002:4c50] type 00 class 0x038000
pci 0000:00:11.0: reg 0x10: [mem 0x82000000-0x82ffffff]
pci 0000:00:11.0: reg 0x14: [io  0x0400-0x04ff]
pci 0000:00:11.0: reg 0x18: [mem 0x82fff000-0x82ffffff]
pci 0000:00:11.0: reg 0x30: [mem 0xfd000000-0xfd01ffff pref]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:13.0: [104c:ac15] type 02 class 0x060700
pci 0000:00:13.0: reg 0x10: [mem 0x81803000-0x81803fff]
pci 0000:00:13.1: [104c:ac15] type 02 class 0x060700
pci 0000:00:13.1: reg 0x10: [mem 0x81802000-0x81802fff]
pci_bus 0000:01: extended config space not accessible
pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 04
pci_bus 0000:05: extended config space not accessible
pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 08
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 08
PCI: Cannot allocate resource region 2 of device 0000:00:11.0, will remap
PCI 0000:00 Cannot reserve Legacy IO [io  0x0000-0x0fff]
pci 0000:00:13.0: BAR 9: assigned [mem 0x84000000-0x87ffffff pref]
pci 0000:00:13.0: BAR 10: assigned [mem 0x88000000-0x8bffffff]
pci 0000:00:13.1: BAR 9: assigned [mem 0x8c000000-0x8fffffff pref]
pci 0000:00:13.1: BAR 10: assigned [mem 0x90000000-0x93ffffff]
pci 0000:00:11.0: BAR 6: assigned [mem 0xfd000000-0xfd01ffff pref]
pci 0000:00:11.0: BAR 2: assigned [mem 0xfd020000-0xfd020fff]
pci 0000:00:13.0: BAR 7: assigned [io  0x1000-0x10ff]
pci 0000:00:13.0: BAR 8: assigned [io  0x1100-0x11ff]
pci 0000:00:13.1: BAR 7: assigned [io  0x1200-0x12ff]
pci 0000:00:13.1: BAR 8: assigned [io  0x1300-0x13ff]
pci 0000:00:13.0: CardBus bridge to [bus 01-04]
pci 0000:00:13.0:   bridge window [io  0x1000-0x10ff]
pci 0000:00:13.0:   bridge window [io  0x1100-0x11ff]
pci 0000:00:13.0:   bridge window [mem 0x84000000-0x87ffffff pref]
pci 0000:00:13.0:   bridge window [mem 0x88000000-0x8bffffff]
pci 0000:00:13.1: CardBus bridge to [bus 05-08]
pci 0000:00:13.1:   bridge window [io  0x1200-0x12ff]
pci 0000:00:13.1:   bridge window [io  0x1300-0x13ff]
pci 0000:00:13.1:   bridge window [mem 0x8c000000-0x8fffffff pref]
pci 0000:00:13.1:   bridge window [mem 0x90000000-0x93ffffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x7fffff]
pci_bus 0000:00: resource 5 [mem 0xfd000000-0xfdffffff]
pci_bus 0000:00: resource 6 [mem 0x80000000-0xfcffffff]
pci_bus 0000:01: resource 0 [io  0x1000-0x10ff]
pci_bus 0000:01: resource 1 [io  0x1100-0x11ff]
pci_bus 0000:01: resource 2 [mem 0x84000000-0x87ffffff pref]
pci_bus 0000:01: resource 3 [mem 0x88000000-0x8bffffff]
pci_bus 0000:05: resource 0 [io  0x1200-0x12ff]
pci_bus 0000:05: resource 1 [io  0x1300-0x13ff]
pci_bus 0000:05: resource 2 [mem 0x8c000000-0x8fffffff pref]
pci_bus 0000:05: resource 3 [mem 0x90000000-0x93ffffff]
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource timebase
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 32 bytes, default 32
Thermal assist unit using workqueue, shrink_timer: 2000 ms
workingset: timestamp_bits=30 max_order=17 bucket_order=0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler mq-deadline registered
pci 0000:00:11.0: enabling device (0086 -> 0087)
Using unsupported 1024x768 (null) at 82801000, depth=32, pitch=4096
Console: switching to colour frame buffer device 128x48
fb0: Open Firmware frame buffer device on /pci/ATY,RageLTPro
pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
Non-volatile memory driver v1.3
brd: module loaded
loop: module loaded
MacIO PCI driver attached to Gatwick chipset
MacIO PCI driver attached to Heathrow chipset
swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay
0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port
0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port
macio: fixed media-bay irq on gatwick
macio: fixed left floppy irqs
swim3 1.00015000:floppy: [fd1] Couldn't request interrupt
swim3: probe of 1.00015000:floppy failed with error -16
macio: fixed left ide irqs
macio: fixed SCC irqs on gatwick
1.00013020:ch-a: ttyS2 at MMIO 0xf4013020 (irq = 79, base_baud = 230400) is a Z85c30 ESCC - Internal modem
mediabay0: Registered Heathrow media-bay
mediabay1: Registered Heathrow media-bay
mediabay0: Bay contains an ATA device
PMU Backlight initialized (pmubl)
mesh: configured for synchronous 5 MB/s
mediabay1: Bay contains a floppy drive
mesh: performing initial bus reset...
random: fast init done
adb device [2]: 2 0xC3
adb device [3]: 3 0x1
adb device [7]: 7 0x1F
ADB keyboard at 2 has handler 0xC3
Detected ADB keyboard, type ANSI.
input: ADB keyboard as /devices/virtual/input/input0
input: ADB Powerbook buttons as /devices/virtual/input/input1
ADB mouse (trackpad) at 3 has handler 0x4
input: ADB mouse as /devices/virtual/input/input2
scsi host0: MESH
pata-macio 0.00020000:ata0: Activating pata-macio chipset Heathrow ATA, Apple bus ID 0
scsi host1: pata_macio
ata1: PATA max MWDMA2 irq 30
ata1.00: ATA-7: SAMSUNG HM100JC, YN100-08, max UDMA/100
ata1.00: 195371568 sectors, multi 8: LBA48
scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HM100JC  0-08 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.2 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
pata-macio 0.00021000:ata1: Activating pata-macio chipset Heathrow ATA, Apple bus ID 1
scsi host2: pata_macio
ata2: PATA max MWDMA2 irq 36
pata-macio 1.00021000:ata4: Activating pata-macio chipset Heathrow ATA, Apple bus ID 4
genirq: Flags mismatch irq 36. 00000000 (pata-macio[1.00021000:ata4]) vs. 00000000 (pata-macio[0.00021000:ata1])
pata-macio: probe of 1.00021000:ata4 failed with error -16
ata2.00: ATA-6: ST9160821A, 3.ALD, max UDMA/100
ata2.00: 312581808 sectors, multi 0: LBA48
eth0: BMAC at 00:05:02:07:5a:a6

aoe: AoE v85 initialised.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
rtc-generic rtc-generic: registered as rtc0
i2c /dev entries driver
PowerMac i2c bus pmu 2 registered
PowerMac i2c bus pmu 1 registered
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
drmem: No dynamic reconfiguration memory found
 sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15
sd 1:0:0:0: [sda] Attached SCSI disk
scsi 2:0:0:0: Direct-Access     ATA      ST9160821A       D    PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14
sd 2:0:0:0: [sdb] Attached SCSI disk
EXT4-fs (sda12): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda12): INFO: recovery required on readonly filesystem
EXT4-fs (sda12): write access will be enabled during recovery
EXT4-fs (sda12): recovery complete
EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
VFS: Mounted root (ext3 filesystem) readonly on device 8:12.
Freeing unused kernel memory: 1228K
Kernel memory protection not selected by kernel config.
Run /sbin/init as init process
  with arguments:
    /sbin/init
  with environment:
    HOME=/
    TERM=linux
INIT: version 2.96 booting
Using makefile-style concurrent boot in runlevel S.
findfs: unable to resolve 'LABEL=Debian_sid'
Starting hotplug events dispatcher: systemd-udevd.
Synthesizing the initial hotplug events (subsystems)...done.
Synthesizing the initial hotplug events (devices)...done.
Waiting for /dev to be fully populated...random: crng init done
phy registers:
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
done.
Setting up keyboard layout...done.
Activating swap...Adding 524284k swap on /dev/sda14.  Priority:-2 extents:1 across:524284k
done.
EXT4-fs (sda12): re-mounted. Opts: (null). Quota mode: disabled.
Checking root file system...Debian_sid: clean, 76261/524288 files, 1036569/2097152 blocks
done.
EXT4-fs (sda12): re-mounted. Opts: errors=remount-ro. Quota mode: disabled.
Checking file systems...data: clean, 83287/3325952 files, 2159937/13280326 blocks
done.
Cleaning up temporary files...
 /tmp.
Loading kernel module lp.
modprobe: FATAL: Module lp not found in directory /lib/modules/5.12.0-rc3-pmac-00077-gc9f6e8dd045
Loading kernel module ppdev.
modprobe: FATAL: Module ppdev not found in directory /lib/modules/5.12.0-rc3-pmac-00077-gc9f6e8dd045
Loading kernel module parport_pc.
modprobe: FATAL: Module parport_pc not found in directory /lib/modules/5.12.0-rc3-pmac-00077-gc9f6e8dd045
Loading kernel module apm_emu.
modprobe: FATAL: Module apm_emu not found in directory /lib/modules/5.12.0-rc3-pmac-00077-gc9f6e8dd045
Loading kernel module bmac.
modprobe: FATAL: Module bmac not found in directory /lib/modules/5.12.0-rc3-pmac-00077-gc9f6e8dd045
Loading kernel module mesh.
modprobe: FATAL: Module mesh not found in directory /lib/modules/5.12.0-rc3-pmac-00077-gc9f6e8dd045
LoadinEXT4-fs (sda15): mounting ext3 file system using the ext4 subsystem
g kernel module snd-powermac.
modprobe: FATAL: Module snd-powermac not found in directory /lib/modules/5.12.0-rc3-pmac-00077-gc9f6e8dd045
EXT4-fs (sda15): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
Mounting local filesystems...done.
Activating swapfile swap, if any...done.
Cleaning up temporary files....
Starting Setting kernel variables: sysctl.
Configuring network interfaces...done.
Cleaning up temporary files....
Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix
.
INIT: Entering runlevel: 2
Using makefile-style concurrent boot in runlevel 2.
Setting up console font and keymap...done.
Recovering nvi editor sessions.
none found.
Starting enhanced syslogd: rsyslogd.
Starting periodic command scheduler: cron.
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd.
Starting S.M.A.R.T. daemon: smartd.
Starting WINGs display manager: wdm:.
Deconfiguring network interfaces...
done.
phy registers:
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000
 0000 0000 0000 0000 0000 0000 0000 0000

Debian GNU/Linux 11 mac-server ttyS0

mac-server login: xfce4-session[1775]: bus error (7) at b3976078 nip aefb1710 lr aefb16e0 code 3 in libLLVM-11.so.1[ae83e000+4d1b000
]
xfce4-session[1775]: code: 7fc802a6 807effac 7fc3f214 835e8054 82fe8134 82de8138 82be813c 80fe8140
xfce4-session[1775]: code: 38600020 90610014 a09a0006 7f45d378 <96e50030> 38da0048 548407fe 90da0034
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1657 at arch/powerpc/mm/fault.c:357 do_page_fault+0x70/0x6b4
Modules linked in:
CPU: 0 PID: 1657 Comm: Xorg Not tainted 5.12.0-rc3-pmac-00077-gc9f6e8dd045 #2
NIP:  c001a094 LR: c001a1d4 CTR: b12622f4
REGS: e2c65e40 TRAP: 0700   Not tainted  (5.12.0-rc3-pmac-00077-gc9f6e8dd045)
MSR:  00021032 <ME,IR,DR,RI>  CR: 44c24f38  XER: 00000000

GPR00: c0004320 e2c65f00 c1562260 e2c65f40 00000000 40000000 04544060 00000000
GPR08: c1562260 38a00000 08000000 e2c65f30 44c65f30 0094fff0 00000000 00000000
GPR16: 00813458 008102f8 00000001 00000063 00000a7a 00000001 b7aee478 00000000
GPR24: 00000001 00000000 00000000 00000000 c1e71240 b12622f4 00000400 e2c65f40
NIP [c001a094] do_page_fault+0x70/0x6b4
LR [c001a1d4] do_page_fault+0x1b0/0x6b4
Call Trace:
[e2c65f00] [c001a164] do_page_fault+0x140/0x6b4 (unreliable)
[e2c65f30] [c0004320] InstructionAccess_virt+0xc4/0xc8
--- interrupt: 400 at 0xb12622f4
NIP:  b12622f4 LR: b7941100 CTR: b12622f4
REGS: e2c65f40 TRAP: 0400   Not tainted  (5.12.0-rc3-pmac-00077-gc9f6e8dd045)
MSR:  4000d032 <EE,PR,ME,IR,DR,RI>  CR: 24000424  XER: 00000000

GPR00: b7941100 bfbd6eb0 b73f45c0 b52c8df8 00000000 b4ed8df8 04544060 00000007
GPR08: b7aed64c b12622f4 aceadebe b7999b70 b7999b70 0094fff0 00000000 00000000
GPR16: 00813458 008102f8 00000001 00000063 00000a7a 00000001 b7aee478 00000000
GPR24: 00000001 00000000 00000000 009e9290 b7aee530 b7aee538 b7aecff4 009e9380
NIP [b12622f4] 0xb12622f4
LR [b7941100] 0xb7941100
--- interrupt: 400
Instruction dump:
83c300a0 752a8410 83820298 553b018c 83a300a4 57de0034 2e0a0000 40920360
2d9b0000 408e0264 752a0800 4182025c <0fe00000> 41920254 81220594 7c4a1378
---[ end trace c40b220173ea820f ]---
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/interrupt.c:49!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1657 Comm: Xorg Tainted: G        W         5.12.0-rc3-pmac-00077-gc9f6e8dd045 #2
NIP:  c0010e4c LR: c0010e3c CTR: b79d2b10
REGS: e2c65e40 TRAP: 0700   Tainted: G        W          (5.12.0-rc3-pmac-00077-gc9f6e8dd045)
MSR:  00021032 <ME,IR,DR,RI>  CR: 44002424  XER: 00000000

GPR00: c00150c0 e2c65f00 c1562260 b7323030 00000001 00000003 b7aeefec 00000004
GPR08: b716c994 00000001 50db435b 4e800020 c1562810 0094fff0 00000000 b716c994
GPR16: 00813458 009acf90 b7d5d058 bfbd6e40 00000000 b7d76cb8 bfbd6d9c 00000019
GPR24: b7323030 b716c994 00000004 b7aeefec 00000003 00000001 e2c65f40 00000014
NIP [c0010e4c] system_call_exception+0x60/0x164
LR [c0010e3c] system_call_exception+0x50/0x164
Call Trace:
[e2c65f00] [c001a164] do_page_fault+0x140/0x6b4 (unreliable)
[e2c65f30] [c00150c0] ret_from_syscall+0x0/0x28
--- interrupt: c00 at 0xb79d2b18
NIP:  b79d2b18 LR: b71417f8 CTR: b7d50a94
REGS: e2c65f40 TRAP: 0c00   Tainted: G        W          (5.12.0-rc3-pmac-00077-gc9f6e8dd045)
MSR:  0000d032 <EE,PR,ME,IR,DR,RI>  CR: 44002424  XER: 00000000

GPR00: 00000014 bfbd6cf0 b73f45c0 b7323030 00000001 00000003 b7aeefec 00000004
GPR08: b716c994 b716cf90 b7907684 00000003 44002424 0094fff0 00000000 b716c994
GPR16: 00813458 009acf90 b7d5d058 bfbd6e40 00000000 b7d76cb8 bfbd6d9c 00000019
GPR24: b7d78534 b7d78030 00000043 00000000 b7d78030 00000000 b7174be8 bfbd6e40
NIP [b79d2b18] 0xb79d2b18
LR [b71417f8] 0xb71417f8
--- interrupt: c00
Instruction dump:
7cdb3378 93810020 7cbc2b78 93a10024 7c9d2378 93e1002c 7d3f4b78 4800cacd
817e0084 931e0088 69690002 5529fffe <0f090000> 69694000 552997fe 0f090000
---[ end trace c40b220173ea8210 ]---

------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/interrupt.c:49!
Oops: Exception in kernel mode, sig: 5 [#2]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1850 Comm: Xorg Tainted: G      D W         5.12.0-rc3-pmac-00077-gc9f6e8dd045 #2
NIP:  c0010e4c LR: c0010e3c CTR: b7995b20
REGS: e1075e40 TRAP: 0700   Tainted: G      D W          (5.12.0-rc3-pmac-00077-gc9f6e8dd045)
MSR:  00021032 <ME,IR,DR,RI>  CR: 420084ec  XER: 00000000

GPR00: c00150c0 e1075f00 c2a9ace0 ada73280 0000000c b7ad60cc ada73904 b7ad57cc
GPR08: ada73900 00000001 50185ccb 7ca42378 c2a9b290 00d8fff0 00801000 00313308
GPR16: 003112a8 00000000 00e483d0 b5aeedc0 bfb3aef8 00313300 00000000 00000000
GPR24: ada73280 ada73900 b7ad57cc ada73904 b7ad60cc 0000000c e1075f40 0000012c
NIP [c0010e4c] system_call_exception+0x60/0x164
LR [c0010e3c] system_call_exception+0x50/0x164
Call Trace:
[e1075f00] [bfb3ae6c] 0xbfb3ae6c (unreliable)
[e1075f30] [c00150c0] ret_from_syscall+0x0/0x28
--- interrupt: c00 at 0x2d970c
NIP:  002d970c LR: 002d96dc CTR: b7a76874
REGS: e1075f40 TRAP: 0c00   Tainted: G      D W          (5.12.0-rc3-pmac-00077-gc9f6e8dd045)
MSR:  0000d932 <EE,PR,ME,IR,DR,RI>  CR: 420084ec  XER: 20000000

GPR00: 0000012c ada72b50 ada7a6e0 ada73280 0000000c b7ad60cc ada73904 b7ad57cc
GPR08: ada73900 ada73278 ffffffff b7a76874 280044ec 00d8fff0 00801000 00313308
GPR16: 003112a8 00000000 00e483d0 b5aeedc0 bfb3aef8 00313300 00000000 00000000
GPR24: ada73270 ada72d80 ada73210 bfb3ae6b 003d0f00 ada73210 00310ff4 ada72b50
NIP [002d970c] 0x2d970c
LR [002d96dc] 0x2d96dc
--- interrupt: c00
Instruction dump:
7cdb3378 93810020 7cbc2b78 93a10024 7c9d2378 93e1002c 7d3f4b78 4800cacd
817e0084 931e0088 69690002 5529fffe <0f090000> 69694000 552997fe 0f090000
---[ end trace c40b220173ea8211 ]---


mac-server login: root
Password:
Linux mac-server 5.12.0-rc3-pmac-00077-gc9f6e8dd045 #2 SMP Wed Aug 4 22:35:13 MDT 2021 ppc

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Wed Aug  4 22:32:58 MDT 2021 on ttyS0
root@mac-server:~# shutdown -r now

Broadcast message from root@mac-server (ttyS0) (Wed Aug  4 22:50:57 2021):

The system is going down for reboot NOW!
INIT: Sending processes configured vUsing makefile-style concurrent boot in runlevel 6.
Stopping mouse emulation daemon: mouseemu.
Stopping hotplug events dispatcher: systemd-udevd.
Stopping S.M.A.R.T. daemon: smartd.
Stopping WINGs display manager: wdm:
Asking all remaining processes to terminate...done.
Currently running processes (pstree):
init-+-rc---startpar---sendsigs---pstree
     |-rsyslogd---3*[{rsyslogd}]
     `-wdm---wdm---Xorg---3*[{Xorg}]
Killing all remaining processes...failed.
Stopping enhanced syslogd: rsyslogd.
Saving the system clock to /dev/rtc0.
Hardware Clock updated to Wed Aug  4 22:51:21 MDT 2021.
Deconfiguring network interfaces...done.
Deactivating swap...done.
Unmounting local filesystems...done.
EXT4-fs (sda12): re-mounted. Opts: (null). Quota mode: disabled.
Will now restart.
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
resetting MESH scsi bus(es)
reboot: Restarting system