dmesg [ 0.000000] Allocated 16384 bytes for 8 pacas at c00000003fffc000 [ 0.000000] MMU: Supported page sizes [ 0.000000] 4 KB as direct [ 0.000000] 4096 KB as direct [ 0.000000] 16384 KB as direct [ 0.000000] 65536 KB as direct [ 0.000000] 262144 KB as direct [ 0.000000] 1048576 KB as direct [ 0.000000] MMU: Book3E HW tablewalk not supported [ 0.000000] Linux version 4.8.0-X5000-Tlosm-LB (amigaone@Amigaone) (gcc version 6.2.0 20160927 (Ubuntu 6.2.0-5ubuntu11) ) #1 SMP PREEMPT Mon Oct 3 19:10:49 CEST 2016 [ 0.000000] Using CoreNet Generic machine description [ 0.000000] Found legacy serial port 0 for /soc@ffe000000/serial@11c500 [ 0.000000] mem=ffe11c500, taddr=ffe11c500, irq=0, clk=400000000, speed=0 [ 0.000000] Found legacy serial port 1 for /soc@ffe000000/serial@11c600 [ 0.000000] mem=ffe11c600, taddr=ffe11c600, irq=0, clk=400000000, speed=0 [ 0.000000] Found legacy serial port 2 for /soc@ffe000000/serial@11d500 [ 0.000000] mem=ffe11d500, taddr=ffe11d500, irq=0, clk=400000000, speed=0 [ 0.000000] Found legacy serial port 3 for /soc@ffe000000/serial@11d600 [ 0.000000] mem=ffe11d600, taddr=ffe11d600, irq=0, clk=400000000, speed=0 [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] (thread shift is 0) [ 0.000000] Freed 8192 bytes for unused pacas [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0xdac00000 [ 0.000000] dcache_bsize = 0x40 [ 0.000000] icache_bsize = 0x40 [ 0.000000] cpu_features = 0x00180400581802c0 [ 0.000000] possible = 0x00180480581802c0 [ 0.000000] always = 0x00180400581802c0 [ 0.000000] cpu_user_features = 0xcc008000 0x08000000 [ 0.000000] mmu_features = 0x000a0010 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] CoreNet Generic board [ 0.000000] Top of RAM: 0xdac00000, Total RAM: 0xdac00000 [ 0.000000] Memory hole size: 0MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000080000000-0x00000000dabfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000dabfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000dabfffff] [ 0.000000] On node 0 totalpages: 896000 [ 0.000000] free_area_init_node: node 0, pgdat c0000000010b75c0, node_mem_map c0000000d7b94000 [ 0.000000] DMA zone: 7168 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 524288 pages, LIFO batch:31 [ 0.000000] Normal zone: 5082 pages used for memmap [ 0.000000] Normal zone: 371712 pages, LIFO batch:31 [ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts [ 0.000000] percpu: Embedded 19 pages/cpu @c0000000d7a00000 s37096 r0 d40728 u262144 [ 0.000000] pcpu-alloc: s37096 r0 d40728 u262144 alloc=1*1048576 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 883750 [ 0.000000] Kernel command line: root=/dev/sda2 mem=3500M radeon.pcie_gen2=1 pci=realloc [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 3441728K/3584000K available (10660K kernel code, 1856K rwdata, 5556K rodata, 384K init, 1458K bss, 142272K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe040000, max 4 CPUs [ 0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff [ 0.000000] mpic: Initializing for 512 sources [ 0.000000] time_init: decrementer frequency = 50.000000 MHz [ 0.000000] time_init: processor frequency = 2200.000000 MHz [ 0.000003] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.000008] clocksource: timebase mult[14000000] shift[24] registered [ 0.000013] clockevent: decrementer mult[ccccccd] shift[32] cpu[0] [ 0.000859] Console: colour dummy device 80x25 [ 0.001171] console [tty0] enabled [ 0.001186] pid_max: default: 32768 minimum: 301 [ 0.001232] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001243] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.001764] e500 family performance monitor hardware support registered [ 0.020349] Brought up 4 CPUs [ 0.020608] devtmpfs: initialized [ 0.024219] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.024291] xor: measuring software checksum speed [ 0.034182] 8regs : 4508.000 MB/sec [ 0.044201] 8regs_prefetch: 4180.000 MB/sec [ 0.054221] 32regs : 4792.000 MB/sec [ 0.064241] 32regs_prefetch: 4180.000 MB/sec [ 0.064249] xor: using function: 32regs (4792.000 MB/sec) [ 0.064259] prandom: seed boundary self test passed [ 0.065320] prandom: 100 self tests passed [ 0.065725] NET: Registered protocol family 16 [ 0.071269] cpuidle: using governor ladder [ 0.075278] cpuidle: using governor menu [ 0.087578] Found FSL PCI host bridge at 0x0000000ffe200000. Firmware bus number: 0->1 [ 0.087594] PCI host bridge /pcie@ffe200000 ranges: [ 0.087604] MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 [ 0.087615] IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 [ 0.087632] /pcie@ffe200000: PCICSRBAR @ 0xdf000000 [ 0.087639] setup_pci_atmu: end of DRAM dac00000 [ 0.087650] /pcie@ffe200000: Setting PCI inbound window greater than memory size [ 0.087909] Found FSL PCI host bridge at 0x0000000ffe201000. Firmware bus number: 0->8 [ 0.087920] PCI host bridge /pcie@ffe201000 ranges: [ 0.087930] MEM 0x0000000c20000000..0x0000000c3fffffff -> 0x00000000e0000000 [ 0.087940] IO 0x0000000ff8010000..0x0000000ff801ffff -> 0x0000000000000000 [ 0.087956] /pcie@ffe201000: PCICSRBAR @ 0xdf000000 [ 0.087963] setup_pci_atmu: end of DRAM dac00000 [ 0.087973] /pcie@ffe201000: Setting PCI inbound window greater than memory size [ 0.088875] iommu: Adding device ff4200000.qman-portal to group 0 [ 0.088900] iommu: Adding device ff4204000.qman-portal to group 1 [ 0.088919] iommu: Adding device ff4208000.qman-portal to group 2 [ 0.088938] iommu: Adding device ff420c000.qman-portal to group 3 [ 0.088958] iommu: Adding device ff4210000.qman-portal to group 4 [ 0.088977] iommu: Adding device ff4214000.qman-portal to group 5 [ 0.088996] iommu: Adding device ff4218000.qman-portal to group 6 [ 0.089015] iommu: Adding device ff421c000.qman-portal to group 7 [ 0.089036] iommu: Adding device ff4220000.qman-portal to group 8 [ 0.089057] iommu: Adding device ff4224000.qman-portal to group 9 [ 0.089099] iommu: Adding device ffe488000.port to group 10 [ 0.089120] iommu: Adding device ffe489000.port to group 11 [ 0.089142] iommu: Adding device ffe48a000.port to group 12 [ 0.089162] iommu: Adding device ffe48b000.port to group 13 [ 0.089182] iommu: Adding device ffe48c000.port to group 14 [ 0.089202] iommu: Adding device ffe490000.port to group 15 [ 0.089236] iommu: Adding device ffe588000.port to group 16 [ 0.089256] iommu: Adding device ffe589000.port to group 17 [ 0.089276] iommu: Adding device ffe58a000.port to group 18 [ 0.089297] iommu: Adding device ffe58b000.port to group 19 [ 0.089317] iommu: Adding device ffe58c000.port to group 20 [ 0.089349] iommu: Adding device ffe590000.port to group 21 [ 0.089388] iommu: Adding device ffe100300.dma to group 22 [ 0.089407] iommu: Adding device ffe101300.dma to group 23 [ 0.089425] iommu: Adding device ffe114000.sdhc to group 24 [ 0.089452] iommu: Adding device ffe210000.usb to group 25 [ 0.089470] iommu: Adding device ffe211000.usb to group 26 [ 0.089491] iommu: Adding device ffe220000.sata to group 27 [ 0.089509] iommu: Adding device ffe221000.sata to group 28 [ 0.089531] iommu: Adding device ffe318000.qman to group 29 [ 0.089550] iommu: Adding device ffe31a000.bman to group 30 [ 0.089569] iommu: Adding device ffe200000.pcie to group 31 [ 0.089589] iommu: Adding device ffe201000.pcie to group 32 [ 0.097491] PCI: Probing PCI hardware [ 0.097625] fsl-pci ffe200000.pcie: PCI host bridge to bus 0000:00 [ 0.097638] pci_bus 0000:00: root bus resource [io 0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff]) [ 0.097652] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) [ 0.097666] pci_bus 0000:00: root bus resource [bus 00-01] [ 0.097676] pci_bus 0000:00: busn_res: [bus 00-01] end is updated to ff [ 0.097694] pci 0000:00:00.0: [1957:0451] type 01 class 0x0b2000 [ 0.097709] pci 0000:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] [ 0.097755] pci 0000:00:00.0: supports D1 D2 [ 0.097758] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.097817] iommu: Removing device ffe200000.pcie from group 31 [ 0.097841] iommu: Adding device 0000:00:00.0 to group 33 [ 0.098027] pci 0000:01:00.0: [1002:6742] type 00 class 0x030000 [ 0.098047] pci 0000:01:00.0: reg 0x10: [mem 0xc00000000-0xc0fffffff 64bit pref] [ 0.098059] pci 0000:01:00.0: reg 0x18: [mem 0xc10000000-0xc1001ffff 64bit] [ 0.098068] pci 0000:01:00.0: reg 0x20: [io 0x8000080000011000-0x80000800000110ff] [ 0.098083] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.098140] pci 0000:01:00.0: supports D1 D2 [ 0.098197] iommu: Adding device 0000:01:00.0 to group 33 [ 0.098253] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300 [ 0.098272] pci 0000:01:00.1: reg 0x10: [mem 0xc10020000-0xc10023fff 64bit] [ 0.098358] pci 0000:01:00.1: supports D1 D2 [ 0.098413] iommu: Adding device 0000:01:00.1 to group 33 [ 0.101503] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.101516] pci 0000:00:00.0: bridge window [io 0x8000080000011000-0x8000080000011fff] [ 0.101520] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc100fffff] [ 0.101572] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.101577] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.101651] fsl-pci ffe201000.pcie: PCI host bridge to bus 1000:00 [ 0.101663] pci_bus 1000:00: root bus resource [io 0x8000080000021000-0x8000080000030fff] (bus address [0x0000-0xffff]) [ 0.101677] pci_bus 1000:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff]) [ 0.101690] pci_bus 1000:00: root bus resource [bus 00-08] [ 0.101699] pci_bus 1000:00: busn_res: [bus 00-08] end is updated to ff [ 0.101713] pci 1000:00:00.0: [1957:0451] type 01 class 0x0b2000 [ 0.101723] pci 1000:00:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] [ 0.101759] pci 1000:00:00.0: supports D1 D2 [ 0.101762] pci 1000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.101817] iommu: Removing device ffe201000.pcie from group 32 [ 0.101838] iommu: Adding device 1000:00:00.0 to group 31 [ 0.102004] pci 1000:01:00.0: [111d:8092] type 01 class 0x060400 [ 0.102136] pci 1000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.102196] iommu: Adding device 1000:01:00.0 to group 31 [ 0.104508] pci 1000:00:00.0: PCI bridge to [bus 01-ff] [ 0.104521] pci 1000:00:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.104525] pci 1000:00:00.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.104652] pci 1000:02:01.0: [111d:8092] type 01 class 0x060400 [ 0.104799] pci 1000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.104860] iommu: Adding device 1000:02:01.0 to group 31 [ 0.104920] pci 1000:02:02.0: [111d:8092] type 01 class 0x060400 [ 0.105067] pci 1000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.105129] iommu: Adding device 1000:02:02.0 to group 31 [ 0.105191] pci 1000:02:03.0: [111d:8092] type 01 class 0x060400 [ 0.105338] pci 1000:02:03.0: PME# supported from D0 D3hot D3cold [ 0.105400] iommu: Adding device 1000:02:03.0 to group 31 [ 0.105470] pci 1000:02:08.0: [111d:8092] type 01 class 0x060400 [ 0.105625] pci 1000:02:08.0: PME# supported from D0 D3hot D3cold [ 0.105687] iommu: Adding device 1000:02:08.0 to group 31 [ 0.105759] pci 1000:02:10.0: [111d:8092] type 01 class 0x060400 [ 0.105887] pci 1000:02:10.0: PME# supported from D0 D3hot D3cold [ 0.105945] iommu: Adding device 1000:02:10.0 to group 31 [ 0.106012] pci 1000:01:00.0: PCI bridge to [bus 02-ff] [ 0.106029] pci 1000:01:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.106036] pci 1000:01:00.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.106222] pci 1000:03:00.0: [12d8:e111] type 01 class 0x060400 [ 0.106359] pci 1000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.106437] iommu: Adding device 1000:03:00.0 to group 31 [ 0.108526] pci 1000:02:01.0: PCI bridge to [bus 03-ff] [ 0.108543] pci 1000:02:01.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.108550] pci 1000:02:01.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.108705] pci 1000:04:04.0: [10ec:8169] type 00 class 0x020000 [ 0.108730] pci 1000:04:04.0: reg 0x10: [io 0x8000080000022000-0x80000800000220ff] [ 0.108743] pci 1000:04:04.0: reg 0x14: [mem 0xc20000000-0xc200000ff] [ 0.108807] pci 1000:04:04.0: reg 0x30: [mem 0x534c0000-0x534dffff pref] [ 0.108859] pci 1000:04:04.0: supports D1 D2 [ 0.108862] pci 1000:04:04.0: PME# supported from D1 D2 D3hot D3cold [ 0.108913] iommu: Adding device 1000:04:04.0 to group 31 [ 0.108970] pci 1000:04:05.0: [1095:3114] type 00 class 0x010400 [ 0.108995] pci 1000:04:05.0: reg 0x10: [io 0x8000080000022100-0x8000080000022107] [ 0.109008] pci 1000:04:05.0: reg 0x14: [io 0x8000080000022108-0x800008000002210b] [ 0.109021] pci 1000:04:05.0: reg 0x18: [io 0x8000080000022110-0x8000080000022117] [ 0.109034] pci 1000:04:05.0: reg 0x1c: [io 0x8000080000022118-0x800008000002211b] [ 0.109048] pci 1000:04:05.0: reg 0x20: [io 0x8000080000022120-0x800008000002212f] [ 0.109061] pci 1000:04:05.0: reg 0x24: [mem 0xc20000400-0xc200007ff] [ 0.109074] pci 1000:04:05.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.109125] pci 1000:04:05.0: supports D1 D2 [ 0.109172] iommu: Adding device 1000:04:05.0 to group 31 [ 0.109267] pci 1000:03:00.0: PCI bridge to [bus 04-ff] [ 0.109284] pci 1000:03:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.109290] pci 1000:03:00.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.109336] pci_bus 1000:04: busn_res: [bus 04-ff] end is updated to 04 [ 0.109341] pci_bus 1000:03: busn_res: [bus 03-ff] end is updated to 04 [ 0.109438] pci 1000:02:02.0: PCI bridge to [bus 05-ff] [ 0.109470] pci_bus 1000:05: busn_res: [bus 05-ff] end is updated to 05 [ 0.109571] pci 1000:02:03.0: PCI bridge to [bus 06-ff] [ 0.109603] pci_bus 1000:06: busn_res: [bus 06-ff] end is updated to 06 [ 0.109698] pci 1000:02:08.0: PCI bridge to [bus 07-ff] [ 0.109730] pci_bus 1000:07: busn_res: [bus 07-ff] end is updated to 07 [ 0.109822] pci 1000:02:10.0: PCI bridge to [bus 08-ff] [ 0.109854] pci_bus 1000:08: busn_res: [bus 08-ff] end is updated to 08 [ 0.109858] pci_bus 1000:02: busn_res: [bus 02-ff] end is updated to 08 [ 0.109863] pci_bus 1000:01: busn_res: [bus 01-ff] end is updated to 08 [ 0.109867] pci_bus 1000:00: busn_res: [bus 00-ff] end is updated to 08 [ 0.109881] PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap [ 0.109900] PCI: Cannot allocate resource region 0 of device 1000:00:00.0, will remap [ 0.109933] PCI: Cannot allocate resource region 6 of device 1000:04:04.0, will remap [ 0.109985] PCI 0000:00 Cannot reserve Legacy IO [io 0x8000080000010000-0x10fff] [ 0.109988] PCI 1000:00 Cannot reserve Legacy IO [io 0x8000080000021000-0x21fff] [ 0.109992] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.110004] pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000] [ 0.110014] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000] [ 0.110026] pci 0000:01:00.0: BAR 6: assigned [mem 0xc10040000-0xc1005ffff pref] [ 0.110037] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.110047] pci 0000:00:00.0: bridge window [io 0x8000080000010000-0x800008000001ffff] [ 0.110059] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff] [ 0.110070] pci_bus 0000:00: No. 2 try to assign unassigned res [ 0.110078] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.110087] pci 0000:00:00.0: bridge window [io 0x8000080000010000-0x800008000001ffff] [ 0.110099] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff] [ 0.110112] pci_bus 0000:00: resource 4 [io 0x8000080000010000-0x800008000001ffff] [ 0.110115] pci_bus 0000:00: resource 5 [mem 0xc00000000-0xc1fffffff] [ 0.110118] pci_bus 0000:01: resource 0 [io 0x8000080000010000-0x800008000001ffff] [ 0.110121] pci_bus 0000:01: resource 1 [mem 0xc00000000-0xc1fffffff] [ 0.110124] pci_bus 1000:00: max bus depth: 4 pci_try_num: 5 [ 0.110204] pci 1000:00:00.0: BAR 0: no space for [mem size 0x01000000] [ 0.110214] pci 1000:00:00.0: BAR 0: failed to assign [mem size 0x01000000] [ 0.110226] pci 1000:04:05.0: BAR 6: assigned [mem 0xc20080000-0xc200fffff pref] [ 0.110238] pci 1000:04:04.0: BAR 6: assigned [mem 0xc20020000-0xc2003ffff pref] [ 0.110248] pci 1000:03:00.0: PCI bridge to [bus 04] [ 0.110259] pci 1000:03:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.110271] pci 1000:03:00.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.110284] pci 1000:02:01.0: PCI bridge to [bus 03-04] [ 0.110294] pci 1000:02:01.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.110306] pci 1000:02:01.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.110321] pci 1000:02:02.0: PCI bridge to [bus 05] [ 0.110340] pci 1000:02:03.0: PCI bridge to [bus 06] [ 0.110359] pci 1000:02:08.0: PCI bridge to [bus 07] [ 0.110378] pci 1000:02:10.0: PCI bridge to [bus 08] [ 0.110397] pci 1000:01:00.0: PCI bridge to [bus 02-08] [ 0.110407] pci 1000:01:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.110419] pci 1000:01:00.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.110434] pci 1000:00:00.0: PCI bridge to [bus 01-08] [ 0.110444] pci 1000:00:00.0: bridge window [io 0x8000080000021000-0x8000080000030fff] [ 0.110456] pci 1000:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff] [ 0.110467] pci_bus 1000:00: No. 2 try to assign unassigned res [ 0.110553] pci 1000:03:00.0: PCI bridge to [bus 04] [ 0.110564] pci 1000:03:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.110576] pci 1000:03:00.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.110589] pci 1000:02:01.0: PCI bridge to [bus 03-04] [ 0.110600] pci 1000:02:01.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.110612] pci 1000:02:01.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.110627] pci 1000:02:02.0: PCI bridge to [bus 05] [ 0.110646] pci 1000:02:03.0: PCI bridge to [bus 06] [ 0.110664] pci 1000:02:08.0: PCI bridge to [bus 07] [ 0.110683] pci 1000:02:10.0: PCI bridge to [bus 08] [ 0.110703] pci 1000:01:00.0: PCI bridge to [bus 02-08] [ 0.110713] pci 1000:01:00.0: bridge window [io 0x8000080000022000-0x8000080000022fff] [ 0.110725] pci 1000:01:00.0: bridge window [mem 0xc20000000-0xc200fffff] [ 0.110740] pci 1000:00:00.0: PCI bridge to [bus 01-08] [ 0.110750] pci 1000:00:00.0: bridge window [io 0x8000080000021000-0x8000080000030fff] [ 0.110762] pci 1000:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff] [ 0.110773] pci_bus 1000:00: resource 4 [io 0x8000080000021000-0x8000080000030fff] [ 0.110776] pci_bus 1000:00: resource 5 [mem 0xc20000000-0xc3fffffff] [ 0.110780] pci_bus 1000:01: resource 0 [io 0x8000080000021000-0x8000080000030fff] [ 0.110783] pci_bus 1000:01: resource 1 [mem 0xc20000000-0xc3fffffff] [ 0.110786] pci_bus 1000:02: resource 0 [io 0x8000080000022000-0x8000080000022fff] [ 0.110789] pci_bus 1000:02: resource 1 [mem 0xc20000000-0xc200fffff] [ 0.110792] pci_bus 1000:03: resource 0 [io 0x8000080000022000-0x8000080000022fff] [ 0.110795] pci_bus 1000:03: resource 1 [mem 0xc20000000-0xc200fffff] [ 0.110798] pci_bus 1000:04: resource 0 [io 0x8000080000022000-0x8000080000022fff] [ 0.110801] pci_bus 1000:04: resource 1 [mem 0xc20000000-0xc200fffff] [ 0.110803] PCI: Probing PCI hardware done [ 0.111473] Setting up Freescale MSI support [ 0.111756] Setting up Freescale MSI support [ 0.112024] Setting up Freescale MSI support [ 0.146714] raid6: int64x1 gen() 789 MB/s [ 0.163738] raid6: int64x1 xor() 574 MB/s [ 0.180735] raid6: int64x2 gen() 1207 MB/s [ 0.197780] raid6: int64x2 xor() 798 MB/s [ 0.214854] raid6: int64x4 gen() 1218 MB/s [ 0.231876] raid6: int64x4 xor() 753 MB/s [ 0.248917] raid6: int64x8 gen() 1183 MB/s [ 0.265975] raid6: int64x8 xor() 757 MB/s [ 0.265982] raid6: using algorithm int64x4 gen() 1218 MB/s [ 0.265990] raid6: .... xor() 753 MB/s, rmw enabled [ 0.265997] raid6: using intx1 recovery algorithm [ 0.266144] Freescale Elo series DMA driver [ 0.266455] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28 [ 0.266489] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29 [ 0.266523] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30 [ 0.266557] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31 [ 0.266836] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32 [ 0.266870] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33 [ 0.266904] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34 [ 0.266938] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35 [ 0.267628] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.267652] vgaarb: loaded [ 0.267658] vgaarb: bridge control possible 0000:01:00.0 [ 0.268070] SCSI subsystem initialized [ 0.268206] libata version 3.00 loaded. [ 0.268415] usbcore: registered new interface driver usbfs [ 0.268466] usbcore: registered new interface driver hub [ 0.268520] usbcore: registered new device driver usb [ 0.268686] pps_core: LinuxPPS API ver. 1 registered [ 0.268695] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.268732] PTP clock support registered [ 0.268853] EDAC MC: Ver: 3.0.0 [ 0.269537] Advanced Linux Sound Architecture Driver Initialized. [ 0.270131] clocksource: Switched to clocksource timebase [ 0.274980] NET: Registered protocol family 2 [ 0.275280] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.275430] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.275949] TCP: Hash tables configured (established 32768 bind 32768) [ 0.276020] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.276156] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.276374] NET: Registered protocol family 1 [ 0.276605] RPC: Registered named UNIX socket transport module. [ 0.276619] RPC: Registered udp transport module. [ 0.276625] RPC: Registered tcp transport module. [ 0.276633] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.276706] PCI: CLS 32 bytes, default 64 [ 0.277512] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.277720] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.282069] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.282842] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.283056] fuse init (API version 7.25) [ 0.284825] async_tx: api initialized (async) [ 0.284909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.284921] io scheduler noop registered [ 0.284928] io scheduler deadline registered [ 0.284993] io scheduler cfq registered (default) [ 0.285884] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.285892] crc32: self tests passed, processed 225944 bytes in 423980 nsec [ 0.286344] crc32c: CRC_LE_BITS = 64 [ 0.286351] crc32c: self tests passed, processed 225944 bytes in 215540 nsec [ 0.316197] crc32_combine: 8373 self tests passed [ 0.346628] crc32c_combine: 8373 self tests passed [ 0.346647] glob: 64 self-tests passed, 0 failed [ 0.348244] aer 0000:00:00.0:pcie002: service driver aer loaded [ 0.348305] aer 1000:00:00.0:pcie002: service driver aer loaded [ 0.371404] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 0.372044] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 25000000) is a 16550A [ 0.372488] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 25000000) is a 16550A [ 0.372564] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEMffe11d500 IRQ37): -28 [ 0.372577] serial8250 serial8250.0: unable to register port at index 3 (IO0 MEMffe11d600 IRQ37): -28 [ 0.372687] ePAPR hypervisor byte channel driver [ 0.372923] [drm] Initialized drm 1.1.0 20060810 [ 0.372949] [drm] radeon kernel modesetting enabled. [ 0.373241] [drm] initializing kernel modesetting (TURKS 0x1002:0x6742 0x174B:0x6570 0x00). [ 0.373265] [drm] register mmio base: 0x10000000 [ 0.373272] [drm] register mmio size: 131072 [ 0.551117] ATOM BIOS: Turks [ 0.551287] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 0.551300] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF [ 0.551310] [drm] Detected VRAM RAM=2048M, BAR=256M [ 0.551317] [drm] RAM width 128bits DDR [ 0.551398] [TTM] Zone kernel: Available graphics memory: 1754350 kiB [ 0.551406] [TTM] Initializing pool allocator [ 0.551420] [TTM] Initializing DMA pool allocator [ 0.551472] [drm] radeon: 2048M of VRAM memory ready [ 0.551480] [drm] radeon: 1024M of GTT memory ready. [ 0.551488] [drm] Loading TURKS Microcode [ 0.551505] [drm] Internal thermal controller with fan control [ 0.555924] [drm] radeon: dpm initialized [ 0.555978] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 0.557809] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 0.591295] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 0.591461] radeon 0000:01:00.0: WB enabled [ 0.591472] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xc0000000d2d87c00 [ 0.591486] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xc0000000d2d87c0c [ 0.595699] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x80000800801b2118 [ 0.595713] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.595721] [drm] Driver supports precise vblank timestamp query. [ 0.595730] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 0.595785] radeon 0000:01:00.0: radeon: using MSI. [ 0.595828] [drm] radeon: irq initialized. [ 0.612501] [drm] ring test on 0 succeeded in 2 usecs [ 0.612521] [drm] ring test on 3 succeeded in 7 usecs [ 0.789658] [drm] ring test on 5 succeeded in 2 usecs [ 0.789675] [drm] UVD initialized successfully. [ 0.789929] [drm] ib test on ring 0 succeeded in 0 usecs [ 0.789997] [drm] ib test on ring 3 succeeded in 0 usecs [ 1.448170] [drm] ib test on ring 5 succeeded [ 1.454322] [drm] Radeon Display Connectors [ 1.454331] [drm] Connector 0: [ 1.454337] [drm] HDMI-A-1 [ 1.454342] [drm] HPD1 [ 1.454349] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 1.454358] [drm] Encoders: [ 1.454364] [drm] DFP1: INTERNAL_UNIPHY2 [ 1.454370] [drm] Connector 1: [ 1.454375] [drm] DVI-D-1 [ 1.454381] [drm] HPD4 [ 1.454387] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 1.454396] [drm] Encoders: [ 1.454402] [drm] DFP2: INTERNAL_UNIPHY [ 1.454408] [drm] Connector 2: [ 1.454413] [drm] VGA-1 [ 1.454420] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 1.454428] [drm] Encoders: [ 1.454434] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 1.551710] [drm] fb mappable at 0xC00363000 [ 1.551719] [drm] vram apper at 0xC00000000 [ 1.551725] [drm] size 8294400 [ 1.551730] [drm] fb depth is 24 [ 1.551736] [drm] pitch is 7680 [ 1.710049] Console: switching to colour frame buffer device 240x67 [ 1.734440] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 1.734639] [drm] Initialized radeon 2.46.0 20080528 for 0000:01:00.0 on minor 0 [ 1.738675] brd: module loaded [ 1.740821] loop: module loaded [ 2.796224] Loading iSCSI transport class v2.0-870. [ 2.796624] iscsi: registered transport (tcp) [ 2.797845] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init [ 2.798350] scsi host0: sata_fsl [ 2.798531] ata1: SATA max UDMA/133 irq 68 [ 2.798644] fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init [ 2.799008] scsi host1: sata_fsl [ 2.799146] ata2: SATA max UDMA/133 irq 69 [ 2.799566] sata_sil 1000:04:05.0: version 2.4 [ 2.799633] sata_sil 1000:04:05.0: Applying R_ERR on DMA activate FIS errata fix [ 2.800389] scsi host2: sata_sil [ 2.800583] scsi host3: sata_sil [ 2.800773] scsi host4: sata_sil [ 2.800962] scsi host5: sata_sil [ 2.801095] ata3: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc20000480 irq 19 [ 2.801250] ata4: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc200004c0 irq 19 [ 2.801398] ata5: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc20000680 irq 19 [ 2.801544] ata6: SATA max UDMA/100 mmio m1024@0xc20000400 tf 0xc200006c0 irq 19 [ 2.801867] platform physmap-flash.0: failed to claim resource 0 [ 2.802927] fsl_espi ffe110000.spi: at 0x8000080080068000 (irq = 53) [ 2.803805] libphy: Fixed MDIO Bus: probed [ 2.804390] libphy: Freescale PowerQUICC MII Bus: probed [ 2.805222] libphy: Freescale XGMAC MDIO Bus: probed [ 2.805746] fsl-fman ffe400000.fman: read_dts_node: Failed to get FM0 clock structure [ 2.805906] fsl-fman: probe of ffe400000.fman failed with error -5 [ 2.806063] fsl-fman ffe500000.fman: read_dts_node: Failed to get FM1 clock structure [ 2.806236] fsl-fman: probe of ffe500000.fman failed with error -5 [ 2.806935] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.807074] r8169 1000:04:04.0 (unnamed net_device) (uninitialized): not PCI Express [ 2.807558] r8169 1000:04:04.0 eth0: RTL8169sb/8110sb at 0x800008008006e000, 60:e3:27:05:53:20, XID 10000000 IRQ 18 [ 2.807763] r8169 1000:04:04.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 2.807969] PPP generic driver version 2.4.2 [ 2.808131] PPP BSD Compression module registered [ 2.808235] PPP Deflate Compression module registered [ 2.812735] NET: Registered protocol family 24 [ 2.817303] VFIO - User Level meta-driver version: 0.3 [ 2.822006] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.826690] ehci-pci: EHCI PCI platform driver [ 2.831249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.836042] ohci-pci: OHCI PCI platform driver [ 2.841316] ehci-fsl: Freescale EHCI Host controller driver [ 2.846064] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 2.850881] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 2.865689] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000 [ 2.877136] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 [ 2.881902] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.886682] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.891498] usb usb1: Product: Freescale On-Chip EHCI Host Controller [ 2.896373] usb usb1: Manufacturer: Linux 4.8.0-X5000-Tlosm-LB ehci_hcd [ 2.901254] usb usb1: SerialNumber: fsl-ehci.0 [ 2.906256] hub 1-0:1.0: USB hub found [ 2.911092] hub 1-0:1.0: 1 port detected [ 2.915998] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller [ 2.920943] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 [ 2.935929] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000 [ 2.947135] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 [ 2.952152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.957212] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.962260] usb usb2: Product: Freescale On-Chip EHCI Host Controller [ 2.967294] usb usb2: Manufacturer: Linux 4.8.0-X5000-Tlosm-LB ehci_hcd [ 2.972307] usb usb2: SerialNumber: fsl-ehci.1 [ 2.977411] hub 2-0:1.0: USB hub found [ 2.982384] hub 2-0:1.0: 1 port detected [ 2.987435] usbcore: registered new interface driver usblp [ 2.992457] usbcore: registered new interface driver usb-storage [ 2.997414] usbcore: registered new interface driver usbserial [ 3.002278] usbcore: registered new interface driver usbserial_generic [ 3.007117] usbserial: USB Serial support registered for generic [ 3.011946] usbcore: registered new interface driver ftdi_sio [ 3.016781] usbserial: USB Serial support registered for FTDI USB Serial Device [ 3.021901] mousedev: PS/2 mouse device common for all mice [ 3.026984] usbcore: registered new interface driver iforce [ 3.032098] usbcore: registered new interface driver xpad [ 3.037447] i2c /dev entries driver [ 3.042819] mpc-i2c ffe118100.i2c: timeout 1000000 us [ 3.047894] mpc-i2c ffe119100.i2c: timeout 1000000 us [ 3.055376] rtc-ds1307 9-006f: rtc core: registered mcp7941x as rtc0 [ 3.060328] rtc-ds1307 9-006f: 64 bytes nvram [ 3.065514] mpc-i2c ffe118000.i2c: timeout 1000000 us [ 3.070651] mpc-i2c ffe119000.i2c: timeout 1000000 us [ 3.075920] md: linear personality registered for level -1 [ 3.080844] md: raid0 personality registered for level 0 [ 3.085747] md: raid1 personality registered for level 1 [ 3.090635] md: raid10 personality registered for level 10 [ 3.095584] md: raid6 personality registered for level 6 [ 3.100417] md: raid5 personality registered for level 5 [ 3.105163] md: raid4 personality registered for level 4 [ 3.109339] ata3: SATA link down (SStatus 0 SControl 310) [ 3.114696] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.119433] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software [ 3.124769] mpc85xx_mc_err_probe: No ECC DIMMs discovered [ 3.129490] mpc85xx_mc_err_probe: No ECC DIMMs discovered [ 3.135079] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT) [ 3.139850] genirq: irq 482 uses trigger mode 4; requested 0 [ 3.144614] MPC85xx_edac acquired irq 482 for PCI Err [ 3.149379] MPC85xx_edac PCI err registered [ 3.154137] EDAC PCI1: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.1.auto (INTERRUPT) [ 3.159135] genirq: irq 481 uses trigger mode 4; requested 0 [ 3.164088] MPC85xx_edac acquired irq 481 for PCI Err [ 3.169021] MPC85xx_edac PCI err registered [ 3.174205] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information [ 3.179264] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information [ 3.184193] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information [ 3.189040] qoriq_cpufreq: qoriq_cpufreq_cpu_init: no clock information [ 3.193800] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver [ 3.198868] sdhci: Secure Digital Host Controller Interface driver [ 3.203664] sdhci: Copyright(c) Pierre Ossman [ 3.208461] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.231139] usb 1-1: new high-speed USB device number 2 using fsl-ehci [ 3.240151] mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA [ 3.245785] hidraw: raw HID events driver (C) Jiri Kosina [ 3.251235] usbcore: registered new interface driver usbhid [ 3.256053] usbhid: USB HID core driver [ 3.261048] Freescale hypervisor management driver [ 3.265869] fsl-hv: no hypervisor found [ 3.272218] no UART detected at 0x1 [ 3.277435] snd_hda_intel 0000:01:00.1: Force to snoop mode by module option [ 3.282581] usbcore: registered new interface driver snd-usb-audio [ 3.287829] usbcore: registered new interface driver snd-ua101 [ 3.293670] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/platform/ffe200000.pcie/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card1/input0 [ 3.298751] usbcore: registered new interface driver snd-usb-usx2y [ 3.302139] usb 2-1: new high-speed USB device number 2 using fsl-ehci [ 3.304145] ata2: Signature Update detected @ 503 msecs [ 3.304152] ata1: Signature Update detected @ 504 msecs [ 3.319146] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 3.324439] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.329572] Initializing XFRM netlink socket [ 3.334958] NET: Registered protocol family 10 [ 3.341590] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.347030] NET: Registered protocol family 17 [ 3.352206] NET: Registered protocol family 15 [ 3.353563] usb 1-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.353566] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.353862] hub 1-1:1.0: USB hub found [ 3.353936] hub 1-1:1.0: 4 ports detected [ 3.377758] Key type dns_resolver registered [ 3.383823] Btrfs loaded, crc32c=crc32c-generic [ 3.389401] Key type encrypted registered [ 3.395649] rtc-ds1307 9-006f: setting system clock to 2016-10-19 12:29:32 UTC (1476880172) [ 3.401110] ALSA device list: [ 3.406309] #0: Virtual MIDI Card 1 [ 3.411545] #1: HDA ATI HDMI at 0xc10020000 irq 41 [ 3.420547] usb 2-1: New USB device found, idVendor=0424, idProduct=2514 [ 3.425899] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.431460] hub 2-1:1.0: USB hub found [ 3.436921] hub 2-1:1.0: 4 ports detected [ 3.464144] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.464147] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.464688] ata1.00: ATA-9: Samsung SSD 840 Series, DXT06B0Q, max UDMA/133 [ 3.464691] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 16/32) [ 3.464694] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 3.464877] ata1.00: failed to get Identify Device Data, Emask 0x1 [ 3.464882] ata1.00: configured for UDMA/133 [ 3.469758] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 [ 3.497896] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224FB, SB00, max UDMA/100 [ 3.498435] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.498627] ata1.00: Enabling discard_zeroes_data [ 3.498654] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.498820] sd 0:0:0:0: [sda] Write Protect is off [ 3.498825] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.498878] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.499031] ata1.00: Enabling discard_zeroes_data [ 3.499487] sda: RDSK (512) sda1 (SWP^@)(res 2 spb 1) sda2 ((res 2 spb 1) sda3 (NTFS)(res 2 spb 1) [ 3.499901] ata1.00: Enabling discard_zeroes_data [ 3.500154] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.551268] ata2.00: configured for UDMA/100 [ 3.557984] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224FB SB00 PQ: 0 ANSI: 5 [ 3.568980] sr 1:0:0:0: [sr0] scsi3-mmc drive: 16x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.574533] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.580293] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.580383] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.636136] usb 1-1.3: new low-speed USB device number 3 using fsl-ehci [ 3.732135] usb 2-1.4: new high-speed USB device number 3 using fsl-ehci [ 3.743927] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c050 [ 3.749512] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.755058] usb 1-1.3: Product: USB-PS/2 Optical Mouse [ 3.760547] usb 1-1.3: Manufacturer: Logitech [ 3.770157] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C050.0001/input/input1 [ 3.776164] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-fsl-ehci.0-1.3/input0 [ 3.832289] random: fast init done [ 3.839171] usb 2-1.4: New USB device found, idVendor=18a5, idProduct=0216 [ 3.845243] usb 2-1.4: New USB device strings: Mfr=10, Product=11, SerialNumber=3 [ 3.851275] usb 2-1.4: Product: Desktop USB Drive [ 3.857248] usb 2-1.4: Manufacturer: Verbatim [ 3.863240] usb 1-1.4: new low-speed USB device number 4 using fsl-ehci [ 3.869159] usb 2-1.4: SerialNumber: 18A5021600008140 [ 3.875584] usb-storage 2-1.4:1.0: USB Mass Storage device detected [ 3.881476] scsi host6: usb-storage 2-1.4:1.0 [ 3.893964] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 3.902545] ata4.00: ATA-9: ST1000DX001-1CM162, CC43, max UDMA/133 [ 3.908397] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 3.919158] ata4.00: configured for UDMA/100 [ 3.925209] scsi 3:0:0:0: Direct-Access ATA ST1000DX001-1CM1 CC43 PQ: 0 ANSI: 5 [ 3.945350] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 3.945378] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.945383] sd 3:0:0:0: [sdb] 4096-byte physical blocks [ 3.945507] sd 3:0:0:0: [sdb] Write Protect is off [ 3.945511] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.945559] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.946387] sdb: RDSK (512) sdb1 (NGF^@)(res 2 spb 2) sdb2 (DOS^C)(res 2 spb 2) sdb3 (SWAP)(res 2 spb 8) sdb4 (NGF^@)(res 2 spb 2) sdb5 ((res 2 spb 1) sdb6 ((res 2 spb 1) sdb7 ((res 2 spb 1) [ 3.947403] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.991678] usb 1-1.4: New USB device found, idVendor=04f2, idProduct=0116 [ 3.998145] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.004595] usb 1-1.4: Product: USB Keyboard [ 4.011018] usb 1-1.4: Manufacturer: CHICONY [ 4.022673] input: CHICONY USB Keyboard as /devices/platform/ffe000000.soc/ffe210000.usb/fsl-ehci.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:04F2:0116.0002/input/input2 [ 4.081326] hid-generic 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-fsl-ehci.0-1.4/input0 [ 4.293329] ata5: SATA link down (SStatus 0 SControl 310) [ 4.621327] ata6: SATA link down (SStatus 0 SControl 310) [ 4.628076] md: Waiting for all devices to be available before autodetect [ 4.634873] md: If you don't use raid, use raid=noautodetect [ 4.641875] md: Autodetecting RAID arrays. [ 4.648632] md: Scanned 0 and added 0 devices. [ 4.655349] md: autorun ... [ 4.662076] md: ... autorun DONE. [ 4.682961] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 4.690011] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities [ 4.801365] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.808100] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 4.831814] devtmpfs: mounted [ 4.838611] Freeing unused kernel memory: 384K (c000000000fdf000 - c00000000103f000) [ 4.845343] This architecture does not have kernel memory protection. [ 4.896830] scsi 6:0:0:0: Direct-Access SAMSUNG HD154UI PQ: 0 ANSI: 2 CCS [ 4.904024] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 4.911186] sd 6:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 4.918557] sd 6:0:0:0: [sdc] Write Protect is off [ 4.925216] sd 6:0:0:0: [sdc] Mode Sense: 28 00 00 00 [ 4.925809] sd 6:0:0:0: [sdc] No Caching mode page found [ 4.932400] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 4.949562] sdc: sdc1 [ 4.958434] sd 6:0:0:0: [sdc] Attached SCSI disk [ 5.409210] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 5.416365] systemd[1]: Detected architecture ppc64. [ 5.446320] systemd[1]: Set hostname to . [ 5.714916] systemd[1]: lwresd.service: Cannot add dependency job, ignoring: Unit lwresd.service is masked. [ 5.721863] systemd[1]: dns-clean.service: Cannot add dependency job, ignoring: Unit dns-clean.service is masked. [ 5.728885] systemd[1]: cgproxy.service: Cannot add dependency job, ignoring: Unit cgproxy.service is masked. [ 5.735913] systemd[1]: cgmanager.service: Cannot add dependency job, ignoring: Unit cgmanager.service is masked. [ 5.744748] systemd[1]: Listening on LVM2 poll daemon socket. [ 5.758453] systemd[1]: Listening on udev Kernel Socket. [ 5.771909] systemd[1]: Listening on Journal Socket. [ 6.494972] mmc0: new high speed SDHC card at address 59b4 [ 6.495243] mmcblk0: mmc0:59b4 USD 3.73 GiB [ 7.405727] random: crng init done [ 8.337600] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 8.444167] systemd-journald[2140]: Received request to flush runtime journal from PID 1 [ 8.936359] r8169 1000:04:04.0 enP4096p4s4: renamed from eth0 [ 9.070632] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 9.078615] Adding 7807584k swap on /dev/sda1. Priority:-1 extents:1 across:7807584k SSFS [ 9.389039] cgroup: new mount options do not match the existing superblock, will be ignored [ 10.590300] IPv6: ADDRCONF(NETDEV_UP): enP4096p4s4: link is not ready [ 10.599683] r8169 1000:04:04.0 enP4096p4s4: link down [ 10.599697] r8169 1000:04:04.0 enP4096p4s4: link down [ 10.599805] IPv6: ADDRCONF(NETDEV_UP): enP4096p4s4: link is not ready [ 12.125380] r8169 1000:04:04.0 enP4096p4s4: link up [ 12.125396] IPv6: ADDRCONF(NETDEV_CHANGE): enP4096p4s4: link becomes ready [ 26.574228] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 26.708611] ISO 9660 Extensions: IEEE_P1282 [ 28.745484] radeon 0000:01:00.0: scheduling IB failed (-2). [ 28.745496] [drm:.radeon_cs_ioctl] *ERROR* Failed to schedule IB ! [ 140.785080] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 140.785099] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 13 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 140.785104] ata2.00: status: { DRDY } [ 140.785112] ata2: hard resetting link [ 141.285804] ata2: Hardreset failed, not off-lined 0 [ 141.790047] ata2: Signature Update detected @ 503 msecs [ 141.950056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 141.952296] ata2.00: configured for UDMA/100 [ 141.952876] ata2: EH complete [ 651.757727] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 651.757746] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 651.757751] ata2.00: status: { DRDY } [ 651.757759] ata2: hard resetting link [ 652.258510] ata2: Hardreset failed, not off-lined 0 [ 652.762696] ata2: Signature Update detected @ 503 msecs [ 652.922704] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 652.924889] ata2.00: configured for UDMA/100 [ 652.925453] ata2: EH complete [ 1103.850542] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1103.850561] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 8 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 1103.850566] ata2.00: status: { DRDY } [ 1103.850574] ata2: hard resetting link [ 1104.350515] ata2: Hardreset failed, not off-lined 0 [ 1104.855507] ata2: Signature Update detected @ 503 msecs [ 1105.015519] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1105.017593] ata2.00: configured for UDMA/100 [ 1105.018075] ata2: EH complete [ 1317.865254] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1317.865273] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 3 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 1317.865278] ata2.00: status: { DRDY } [ 1317.865286] ata2: hard resetting link [ 1318.364531] ata2: Hardreset failed, not off-lined 0 [ 1318.869478] ata2: Signature Update detected @ 503 msecs [ 1319.029493] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1319.031554] ata2.00: configured for UDMA/100 [ 1319.032037] ata2: EH complete [ 2249.184079] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 2249.184099] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 12 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 2249.184104] ata2.00: status: { DRDY } [ 2249.184111] ata2: hard resetting link [ 2249.684444] ata2: Hardreset failed, not off-lined 0 [ 2249.686569] ata2: Signature Update detected @ 0 msecs [ 2249.845059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2249.848140] ata2.00: configured for UDMA/100 [ 2249.848896] ata2: EH complete [ 5787.073483] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 5787.073502] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 14 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:03:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout) [ 5787.073507] ata2.00: status: { DRDY } [ 5787.073515] ata2: hard resetting link [ 5787.573781] ata2: Hardreset failed, not off-lined 0 [ 5788.078443] ata2: Signature Update detected @ 503 msecs [ 5788.238447] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5788.241613] ata2.00: configured for UDMA/100 [ 5788.242124] ata2: EH complete [ 7311.795765] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 7311.795784] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 7311.795789] ata2.00: status: { DRDY } [ 7311.795797] ata2: hard resetting link [ 7312.296615] ata2: Hardreset failed, not off-lined 0 [ 7312.298742] ata2: Signature Update detected @ 0 msecs [ 7312.456736] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7312.459836] ata2.00: configured for UDMA/100 [ 7312.460347] ata2: EH complete [ 8104.876621] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 8104.876640] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 15 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 8104.876645] ata2.00: status: { DRDY } [ 8104.876653] ata2: hard resetting link [ 8105.377438] ata2: Hardreset failed, not off-lined 0 [ 8105.881590] ata2: Signature Update detected @ 503 msecs [ 8106.041592] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8106.044742] ata2.00: configured for UDMA/100 [ 8106.045253] ata2: EH complete [ 9299.873870] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9299.873889] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 9299.873894] ata2.00: status: { DRDY } [ 9299.873902] ata2: hard resetting link [ 9300.374677] ata2: Hardreset failed, not off-lined 0 [ 9300.878834] ata2: Signature Update detected @ 503 msecs [ 9301.038833] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9301.042309] ata2.00: configured for UDMA/100 [ 9301.042838] ata2: EH complete [ 9749.917813] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9749.917833] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 7 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 9749.917838] ata2.00: status: { DRDY } [ 9749.917845] ata2: hard resetting link [ 9750.418786] ata2: Hardreset failed, not off-lined 0 [ 9750.922778] ata2: Signature Update detected @ 502 msecs [ 9751.082788] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9751.085962] ata2.00: configured for UDMA/100 [ 9751.086473] ata2: EH complete [ 9975.707786] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9975.707806] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 8 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 9975.707811] ata2.00: status: { DRDY } [ 9975.707819] ata2: hard resetting link [ 9976.207743] ata2: Hardreset failed, not off-lined 0 [ 9976.712753] ata2: Signature Update detected @ 503 msecs [ 9976.872755] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9976.875870] ata2.00: configured for UDMA/100 [ 9976.876380] ata2: EH complete [10093.978722] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10093.978740] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 4 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [10093.978746] ata2.00: status: { DRDY } [10093.978753] ata2: hard resetting link [10094.479170] ata2: Hardreset failed, not off-lined 0 [10094.983693] ata2: Signature Update detected @ 503 msecs [10095.143688] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10095.146768] ata2.00: configured for UDMA/100 [10095.147279] ata2: EH complete [11047.826134] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [11047.826154] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 8 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [11047.826159] ata2.00: status: { DRDY } [11047.826167] ata2: hard resetting link [11048.326224] ata2: Hardreset failed, not off-lined 0 [11048.831117] ata2: Signature Update detected @ 503 msecs [11048.991100] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [11048.994241] ata2.00: configured for UDMA/100 [11048.994764] ata2: EH complete [12238.727445] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [12238.727464] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [12238.727469] ata2.00: status: { DRDY } [12238.727477] ata2: hard resetting link [12239.228096] ata2: Hardreset failed, not off-lined 0 [12239.732412] ata2: Signature Update detected @ 503 msecs [12239.892408] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [12239.895483] ata2.00: configured for UDMA/100 [12239.895994] ata2: EH complete [13491.069128] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [13491.069146] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 6 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [13491.069151] ata2.00: status: { DRDY } [13491.069159] ata2: hard resetting link [13491.569938] ata2: Hardreset failed, not off-lined 0 [13491.572066] ata2: Signature Update detected @ 0 msecs [13491.730111] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [13491.733248] ata2.00: configured for UDMA/100 [13491.733754] ata2: EH complete [13556.604604] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [13556.604623] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [13556.604628] ata2.00: status: { DRDY } [13556.604636] ata2: hard resetting link [13557.104939] ata2: Hardreset failed, not off-lined 0 [13557.107066] ata2: Signature Update detected @ 0 msecs [13557.265578] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [13557.268663] ata2.00: configured for UDMA/100 [13557.269172] ata2: EH complete [14142.839920] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [14142.839940] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 10 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [14142.839945] ata2.00: status: { DRDY } [14142.839952] ata2: hard resetting link [14143.340796] ata2: Hardreset failed, not off-lined 0 [14143.844895] ata2: Signature Update detected @ 502 msecs [14144.004899] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14144.008284] ata2.00: configured for UDMA/100 [14144.008801] ata2: EH complete [14250.871052] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [14250.871071] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 1 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [14250.871076] ata2.00: status: { DRDY } [14250.871085] ata2: hard resetting link [14251.371418] ata2: Hardreset failed, not off-lined 0 [14251.877023] ata2: Signature Update detected @ 504 msecs [14252.036031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14252.039512] ata2.00: configured for UDMA/100 [14252.040050] ata2: EH complete [14707.059412] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [14707.059431] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 2 pio 16392 in opcode=0x4a 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [14707.059436] ata2.00: status: { DRDY } [14707.059443] ata2: hard resetting link [14707.559493] ata2: Hardreset failed, not off-lined 0 [14708.064388] ata2: Signature Update detected @ 503 msecs [14708.224391] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14708.227492] ata2.00: configured for UDMA/100 [14708.227998] ata2: EH complete