The core irq_set_type() function updates the flow type when the chip
callback returns 0. So setting the type is bogus. The level flag is
updated in the core as well.

Use the proper accessors for setting the irq handlers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/powerpc/sysdev/mpc8xx_pic.c |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

Index: linux-2.6-tip/arch/powerpc/sysdev/mpc8xx_pic.c
===================================================================
--- linux-2.6-tip.orig/arch/powerpc/sysdev/mpc8xx_pic.c
+++ linux-2.6-tip/arch/powerpc/sysdev/mpc8xx_pic.c
@@ -72,13 +72,6 @@ static void mpc8xx_end_irq(struct irq_da
 
 static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
 {
-	struct irq_desc *desc = irq_to_desc(d->irq);
-
-	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
-	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
-	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
-		desc->status |= IRQ_LEVEL;
-
 	if (flow_type & IRQ_TYPE_EDGE_FALLING) {
 		irq_hw_number_t hw = (unsigned int)irq_map[d->irq].hwirq;
 		unsigned int siel = in_be32(&siu_reg->sc_siel);
@@ -87,7 +80,7 @@ static int mpc8xx_set_irq_type(struct ir
 		if ((hw & 1) == 0) {
 			siel |= (0x80000000 >> hw);
 			out_be32(&siu_reg->sc_siel, siel);
-			desc->handle_irq = handle_edge_irq;
+			__set_irq_handler_unlocked(irq, handle_edge_irq);
 		}
 	}
 	return 0;


