<4>Crash kernel location must be 0x2000000 <6>Reserving 256MB of memory at 32MB for crashkernel (System RAM: 4096MB) <6>Phyp-dump disabled at boot time <6>Using pSeries machine description <7>Page orders: linear mapping = 16, virtual = 16, io = 12 <6>Using 1TB segments <4>Found initrd at 0xc000000003500000:0xc000000003ccdf60 <6>bootconsole [udbg0] enabled <6>Partition configured for 2 cpus. <6>CPU maps initialized for 2 threads per core <7> (thread shift is 1) <4>Starting Linux PPC64 #2 SMP Thu Sep 24 12:59:21 IST 2009 <4>----------------------------------------------------- <4>ppc64_pft_size = 0x1a <4>physicalMemorySize = 0x100000000 <4>htab_hash_mask = 0x7ffff <4>----------------------------------------------------- <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 2.6.31-git13-autotest (root@mpower6lp5) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #2 SMP Thu Sep 24 12:59:21 IST 2009 <4>[boot]0012 Setup Arch <7>Node 0 Memory: <7>Node 2 Memory: 0x0-0xe0000000 <7>Node 3 Memory: 0xe0000000-0x100000000 <4>EEH: No capable adapters found <6>PPC64 nvram contains 15360 bytes <7>Using shared processor idle loop <4>Zone PFN ranges: <4> DMA 0x00000000 -> 0x00010000 <4> Normal 0x00010000 -> 0x00010000 <4>Movable zone start PFN for each node <4>early_node_map[2] active PFN ranges <4> 2: 0x00000000 -> 0x0000e000 <4> 3: 0x0000e000 -> 0x00010000 <4>Could not find start_pfn for node 0 <7>On node 0 totalpages: 0 <7>On node 2 totalpages: 57344 <7> DMA zone: 56 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 57288 pages, LIFO batch:1 <7>On node 3 totalpages: 8192 <7> DMA zone: 8 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 8184 pages, LIFO batch:0 <4>[boot]0015 Setup Done <6>PERCPU: Embedded 2 pages/cpu @c000000001200000 s100232 r0 d30840 u524288 <7>pcpu-alloc: s100232 r0 d30840 u524288 alloc=1*1048576 <7>pcpu-alloc: [0] 0 1 <4>Built 3 zonelists in Node order, mobility grouping on. Total pages: 65472 <4>Policy zone: DMA <5>Kernel command line: root=/dev/sda3 sysrq=8 insmod=sym53c8xx insmod=ipr crashkernel=512M-:256M xmon=early <6>PID hash table entries: 4096 (order: -1, 32768 bytes) <4>freeing bootmem node 2 <4>freeing bootmem node 3 <6>Memory: 3896832k/4194304k available (9728k kernel code, 297472k reserved, 3072k data, 4291k bss, 576k init) <6>SLUB: Genslabs=18, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=16 <6>Hierarchical RCU implementation. <6>RCU-based detection of stalled CPUs is enabled. <6>NR_IRQS:512 <4>[boot]0020 XICS Init <4>[boot]0021 XICS Done <7>pic: no ISA interrupt controller <7>time_init: decrementer frequency = 512.000000 MHz <7>time_init: processor frequency = 4704.000000 MHz <6>clocksource: timebase mult[7d0000] shift[22] registered <7>clockevent: decrementer mult[83126e97] shift[32] cpu[0] <4>Console: colour dummy device 80x25 <6>console [hvc0] enabled, bootconsole disabled <6>allocated 2621440 bytes of page_cgroup <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>Security Framework initialized <6>SELinux: Disabled at boot. <6>Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes) <6>Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes) <4>Mount-cache hash table entries: 4096 <6>Initializing cgroup subsys ns <6>Initializing cgroup subsys cpuacct <6>Initializing cgroup subsys memory <6>Initializing cgroup subsys devices <6>Initializing cgroup subsys freezer <7>irq: irq 2 on host null mapped to virtual irq 16 <7>clockevent: decrementer mult[83126e97] shift[32] cpu[1] <4>Processor 1 found. <6>Brought up 2 CPUs <7>Node 0 CPUs: 0-1 <7>Node 2 CPUs: <7>Node 3 CPUs: <7>CPU0 attaching sched-domain: <7> domain 0: span 0-1 level SIBLING <7> groups: 0 (cpu_power = 589) 1 (cpu_power = 589) <7> domain 1: span 0-1 level CPU <7> groups: 0-1 (cpu_power = 1178) <7>CPU1 attaching sched-domain: <7> domain 0: span 0-1 level SIBLING <7> groups: 1 (cpu_power = 589) 0 (cpu_power = 589) <7> domain 1: span 0-1 level CPU <7> groups: 0-1 (cpu_power = 1178) <6>NET: Registered protocol family 16 <6>IBM eBus Device Driver <6>POWER6 performance monitor hardware support registered <6>PCI: Probing PCI hardware <7>PCI: Probing PCI hardware done <4>bio: create slab at 0 <6>vgaarb: loaded <6>usbcore: registered new interface driver usbfs <6>usbcore: registered new interface driver hub <6>usbcore: registered new device driver usb <6>Switching to clocksource timebase <6>NET: Registered protocol family 2 <6>IP route cache hash table entries: 32768 (order: 2, 262144 bytes) <6>TCP established hash table entries: 131072 (order: 5, 2097152 bytes) <6>TCP bind hash table entries: 65536 (order: 5, 2097152 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>NET: Registered protocol family 1 <6>Unpacking initramfs... <7>Switched to high resolution mode on CPU 0 <7>Switched to high resolution mode on CPU 1 <7>irq: irq 655360 on host null mapped to virtual irq 17 <7>irq: irq 655367 on host null mapped to virtual irq 18 <6>IOMMU table initialized, virtual merging enabled <7>irq: irq 589825 on host null mapped to virtual irq 19 <7>RTAS daemon started <6>audit: initializing netlink socket (disabled) <5>type=2000 audit(1253778214.210:1): initialized <6>Kprobe smoke test started <6>Kprobe smoke test passed successfully <6>HugeTLB registered 16 MB page size, pre-allocated 0 pages <6>HugeTLB registered 16 GB page size, pre-allocated 0 pages <5>VFS: Disk quotas dquot_6.5.2 <4>Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) <6>Btrfs loaded <6>msgmni has been set to 7608 <6>alg: No test for stdrng (krng) <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 <7>vio_register_driver: driver hvc_console registering <7>HVSI: registered 0 devices <6>Generic RTC Driver v1.07 <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled <6>pmac_zilog: 0.6 (Benjamin Herrenschmidt ) <6>input: Macintosh mouse button emulation as /devices/virtual/input/input0 <6>Uniform Multi-Platform E-IDE driver <6>ide-gd driver 1.18 <6>IBM eHEA ethernet device driver (Release EHEA_0102) <7>irq: irq 590088 on host null mapped to virtual irq 264 <6>ehea: eth0: Jumbo frames are disabled <6>ehea: eth0 -> logical port id #2 <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>mice: PS/2 mouse device common for all mice <6>EDAC MC: Ver: 2.1.0 Sep 24 2009 <6>usbcore: registered new interface driver hiddev <6>usbcore: registered new interface driver usbhid <6>usbhid: v2.6:USB HID core driver <6>TCP cubic registered <6>NET: Registered protocol family 15 <4>registered taskstats version 1 <4>Freeing unused kernel memory: 576k freed <6>SysRq : Changing Loglevel <4>Loglevel set to 8 <5>SCSI subsystem initialized <7>vio_register_driver: driver ibmvscsi registering <6>ibmvscsi 30000007: SRP_VERSION: 16.a <6>scsi0 : IBM POWER Virtual SCSI Adapter 1.5.8 <6>ibmvscsi 30000007: partner initialization complete <6>ibmvscsi 30000007: host srp version: 16.a, host partition VIO Server (1), OS 3, max io 1048576 <6>ibmvscsi 30000007: Client reserve enabled <6>ibmvscsi 30000007: sent SRP login <6>ibmvscsi 30000007: SRP_LOGIN succeeded <5>scsi 0:0:1:0: Direct-Access AIX VDASD 0001 PQ: 0 ANSI: 3 <5>scsi 0:0:2:0: CD-ROM AIX VOPTA PQ: 0 ANSI: 4 <6>udevd version 128 started <5>sd 0:0:1:0: [sda] 146800640 512-byte logical blocks: (75.1 GB/70.0 GiB) <5>sd 0:0:1:0: [sda] Write Protect is off <7>sd 0:0:1:0: [sda] Mode Sense: 17 00 00 08 <5>sd 0:0:1:0: [sda] Cache data unavailable <3>sd 0:0:1:0: [sda] Assuming drive cache: write through <5>sd 0:0:1:0: [sda] Cache data unavailable <3>sd 0:0:1:0: [sda] Assuming drive cache: write through <6> sda: sda1 sda2 sda3 <5>sd 0:0:1:0: [sda] Cache data unavailable <3>sd 0:0:1:0: [sda] Assuming drive cache: write through <5>sd 0:0:1:0: [sda] Attached SCSI disk <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on sda3, internal journal <6>EXT3-fs: mounted filesystem with writeback data mode. <6>udevd version 128 started <5>sd 0:0:1:0: Attached scsi generic sg0 type 0 <5>scsi 0:0:2:0: Attached scsi generic sg1 type 5 <4>sr0: scsi-1 drive <6>Uniform CD-ROM driver Revision: 3.20 <7>sr 0:0:2:0: Attached scsi CD-ROM sr0 <6>Adding 2096320k swap on /dev/sda2. Priority:-1 extents:1 across:2096320k <6>device-mapper: uevent: version 1.0.3 <6>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com <6>loop: module loaded <6>fuse init (API version 7.13) <7>irq: irq 33539 on host null mapped to virtual irq 259 <6>ehea: eth0: Physical port up <6>ehea: External switch port is backup port <7>irq: irq 33540 on host null mapped to virtual irq 260 <6>NET: Registered protocol family 10 <3>INFO: RCU detected CPU 0 stall (t=1000 jiffies)