<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3492" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>We have a board similar to the MPC8323 rdb. In the board we
have<BR>connected the IDSEL to AD18 & we have only one minipci
connector for it. We<BR>have interfaced a Wlan Card . When we do <BR><FONT
face=Arial size=2></FONT></DIV>
<DIV><FONT face=Arial size=2># lspci -x we get following</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV>00:12.0 Network controller: RaLink RT2561/RT61 802.11g PCI<BR>00: 14 18 01
03 07 00 10 04 00 00 80 02 08 80 00 00<BR>10: 00 80 00 90 00 00 00 00 00 00 00
00 00 00 00 00<BR>20: 00 00 00 00 00 00 00 00 01 06 00 00 14 18 61 25<BR>30: 00
00 00 00 40 00 00 00 00 00 00 00 13 01 00 00<BR><BR>In our circuit INTA is
connected to IRQ4 . We are unable<BR>to transmit thro this card. We are not
getting any interrupts.We want to<BR>make sure where to give the mapping of
interrupts ? </DIV>
<DIV>how to give that for IDsel AD 18, INTA should be mapped to IRQ4 .</DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Is it that we need to change the dts file &
create a new dtb? if so where to get exact meaning of how to
configure "interrupt mapping" in the dts file</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV><FONT face=Arial size=2>Regards</FONT></DIV>
<DIV><FONT face=Arial size=2>Praveen</FONT> </DIV></BODY></HTML>