[1;37m[2;40mConfig file read, 2093 bytes Welcome to yaboot version 1.3.13 Enter "help" to get some basic usage information boot: autobench Please wait, loading kernel... Elf64 kernel loaded... Loading ramdisk... ramdisk loaded at 01b00000, size: 5428 Kbytes OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020 command line: root=/dev/sda4 ro console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda7 ABAT:1235973754 memory layout at init: alloc_bottom : 000000000204d000 alloc_top : 0000000030000000 alloc_top_hi : 0000000280000000 rmo_top : 0000000030000000 ram_top : 0000000280000000 Looking for displays found display : /pci@0,f0000000/ATY,SimoneParent@10/ATY,Simone_A@0, opening ... done found display : /pci@0,f0000000/ATY,SimoneParent@10/ATY,Simone_B@1, opening ... done copying OF device tree ... Building dt strings... Building dt structure... Device tree strings 0x000000000234e000 -> 0x000000000234f64c Device tree struct 0x0000000002350000 -> 0x0000000002389000 Calling quiesce ... returning from prom_init Hello World ! [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] Using PowerMac machine description [ 0.000000] Found initrd at 0xc000000001b00000:0xc00000000204d000 [ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0xb3 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 [ 0.000000] boot stdout isn't a display ! [ 0.000000] DART IOMMU initialized for U3 type chipset [ 0.000000] console [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] Starting Linux PPC64 #1 SMP Mon Mar 2 05:26:24 UTC 2009 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] physicalMemorySize = 0x200000000 [ 0.000000] htab_address = 0xc000000278000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Linux version 2.6.29-rc6-git5-autokern1 (root@elm3b19) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #1 SMP Mon Mar 2 05:26:24 UTC 2009 CF000012 Setup Arch [ 0.000000] [boot]0012 Setup Arch [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] via-pmu: Server Mode is enabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=776, gen1=777 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00280000 [ 0.000000] Normal 0x00280000 -> 0x00280000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00080000 [ 0.000000] 0: 0x00100000 -> 0x00280000 CF000015 Setup Done [ 0.000000] [boot]0015 Setup Done [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2061312 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=/dev/sda4 ro console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda7 ABAT:1235973754 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] clocksource: timebase mult[7800001] shift[22] registered [ 0.012359] Console: colour dummy device 80x25 [ 0.021190] console [tty0] enabled [ 0.000000] DART table allocated at: c00000007f000000 [ 0.000000] Using PowerMac machine description [ 0.000000] Found initrd at 0xc000000001b00000:0xc00000000204d000 [ 0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0xb3 [ 0.000000] Mapped at 0xd000080080000000 [ 0.000000] Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000 [ 0.000000] PowerMac motherboard: PowerMac G5 [ 0.000000] boot stdout isn't a display ! [ 0.000000] DART IOMMU initialized for U3 type chipset [ 0.000000] console [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] Starting Linux PPC64 #1 SMP Mon Mar 2 05:26:24 UTC 2009 [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] physicalMemorySize = 0x200000000 [ 0.000000] htab_address = 0xc000000278000000 [ 0.000000] htab_hash_mask = 0xfffff [ 0.000000] ----------------------------------------------------- [ 0.000000] Linux version 2.6.29-rc6-git5-autokern1 (root@elm3b19) (gcc version 4.0.2 20050808 (prerelease) (Ubuntu 4.0.1-4ubuntu9)) #1 SMP Mon Mar 2 05:26:24 UTC 2009 [ 0.000000] [boot]0012 Setup Arch [ 0.000000] Found U3-AGP PCI host bridge. Firmware bus number: 240->255 [ 0.000000] PCI host bridge /pci@0,f0000000 ranges: [ 0.000000] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 [ 0.000000] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000 [ 0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0 [ 0.000000] Found U3-HT PCI host bridge. Firmware bus number: 0->239 [ 0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges: [ 0.000000] via-pmu: Server Mode is enabled [ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c [ 0.000000] nvram: Checking bank 0... [ 0.000000] nvram: gen0=776, gen1=777 [ 0.000000] nvram: Active bank is: 1 [ 0.000000] nvram: OF partition at 0x410 [ 0.000000] nvram: XP partition at 0x1020 [ 0.000000] nvram: NR partition at 0x1120 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00280000 [ 0.000000] Normal 0x00280000 -> 0x00280000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00080000 [ 0.000000] 0: 0x00100000 -> 0x00280000 [ 0.000000] [boot]0015 Setup Done [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2061312 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=/dev/sda4 ro console=tty0 console=ttyS0,57600 autobench_args: root=/dev/sda7 ABAT:1235973754 [ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs [ 0.000000] mpic: ISU size: 120, shift: 7, mask: 7f [ 0.000000] mpic: Initializing for 120 sources [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] clocksource: timebase mult[7800001] shift[22] registered [ 0.012359] Console: colour dummy device 80x25 [ 0.021190] console [tty0] enabledú[ 0.641012] console handover: boot [udbg0] -> real [ttyS0] [ 0.657617] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.680829] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.697623] freeing bootmem node 0 [ 0.941314] Memory: 8085276k/8388608k available (4348k kernel code, 303332k reserved, 760k data, 436k bss, 272k init) [ 0.962416] Calibrating delay loop... 66.56 BogoMIPS (lpj=133120) [ 1.062043] Security Framework initialized [ 1.070127] SELinux: Disabled at boot. [ 1.077792] Mount-cache hash table entries: 256 smp_core99_probe [ 1.092683] PowerMac SMP probe found 2 cpus [ 1.101139] KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000 [ 1.114021] channel 0 bus [ 1.121311] channel 1 bus [ 1.128626] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000 [ 1.143710] channel 0 bus [ 1.151006] PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c [ 1.164199] channel 1 bus [ 1.171490] channel 2 bus [ 1.178854] Processor timebase sync using Cypress i2c clock [ 1.189891] mpic: requesting IPIs ... smp_core99_kick_cpu smp_core99_kick_cpu done [ 1.206762] Processor 1 found. [ 1.250881] Brought up 2 CPUs [ 1.250910] Unable to handle kernel paging request for data at address 0x00000009 [ 1.250913] Faulting instruction address: 0xc00000000005b5d8 [ 1.250917] Oops: Kernel access of bad area, sig: 11 [#1] [ 1.250920] SMP NR_CPUS=32 NUMA PowerMac [ 1.250923] Modules linked in: [ 1.250927] NIP: c00000000005b5d8 LR: c00000000006f950 CTR: c00000000005b5a0 [ 1.250931] REGS: c0000002763c3c80 TRAP: 0300 Not tainted (2.6.29-rc6-git5-autokern1) [ 1.250933] MSR: 9000000000009032 CR: 24000084 XER: 000fffff [ 1.250941] DAR: 0000000000000009, DSISR: 0000000040000000 [ 1.250944] TASK = c0000002760e20c0[5] 'ksoftirqd/1' THREAD: c0000002763c0000 CPU: 1 [ 1.250946] GPR00: 0000000000000000 c0000002763c3f00 c0000000005008f8 0000000000000001 [ 1.250951] GPR04: c0000002760e28d0 0000000000000000 0000000024000082 c0000000000101bc [ 1.250956] GPR08: 0000000000000000 000000000ec1c518 c00000000051ca40 0000000000000010 [ 1.250960] GPR12: c000000000524700 c000000000524500 0000000000000000 0000000000000000 [ 1.250965] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 1.250969] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000001400000 [ 1.250973] GPR24: 00000000018314c0 c000000000431260 c000000000529680 0000000000000000 [ 1.250978] GPR28: c0000002760bfc48 0000000000000001 c00000000049f770 c0000000004b7300 [ 1.250989] NIP [c00000000005b5d8] .tasklet_kill_immediate+0x38/0xb8 [ 1.250996] LR [c00000000006f950] .kthread+0x78/0xc4 [ 1.250997] Call Trace: [ 1.251001] [c0000002763c3f00] [c00000000006f918] .kthread+0x40/0xc4 (unreliable) [ 1.251008] [c0000002763c3f90] [c000000000022fe8] .kernel_thread+0x54/0x70 [ 1.251010] Instruction dump: [ 1.251012] 7c8b07b4 7d693670 7d290194 556b06be e95e8038 7d2907b4 79291f24 e94a0000 [ 1.251018] 7c0a482a 7c005c36 780007e0 0b000000 7800ffe2 0b000000 e8030008 [ 1.251033] ---[ end trace 31fd0ba7d8756001 ]--- [ 1.251059] Unable to handle kernel paging request for data at address 0x00000000 [ 1.251062] Faulting instruction address: 0xc0000000000db8ac [ 1.251065] Oops: Kernel access of bad area, sig: 11 [#2] [ 1.251067] SMP NR_CPUS=32 NUMA PowerMac [ 1.251070] Modules linked in: [ 1.251073] NIP: c0000000000db8ac LR: c000000000051d30 CTR: 0000000000000003 [ 1.251076] REGS: c0000002763c35d0 TRAP: 0300 Tainted: G D (2.6.29-rc6-git5-autokern1) [ 1.251079] MSR: 9000000000009032 CR: 28004082 XER: 200fffff [ 1.251085] DAR: 0000000000000000, DSISR: 0000000040000000 [ 1.251088] TASK = c0000002760e20c0[5] 'ksoftirqd/1' THREAD: c0000002763c0000 CPU: 1 [ 1.251091] GPR00: 0000000000000004 c0000002763c3850 c0000000005008f8 c000000276027d00 [ 1.251095] GPR04: c0000002763b6980 0000000000000000 000000000000001f c00000000045e0d0 [ 1.251100] GPR08: c0000002760e2288 0000000000000000 c000000000524500 c0000002763b6080 [ 1.251104] GPR12: 0000000048000084 c000000000524500 0000000000000000 0000000000000000 [ 1.251109] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 1.251113] GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 1.251118] GPR24: c0000002760e20b0 c0000002760e2220 0000000000000000 c000000276027d00 [ 1.251122] GPR28: 0000000000000000 c0000002763b6980 c0000000004a37c8 0000000000000000 [ 1.251131] NIP [c0000000000db8ac] .kmem_cache_free+0x1b8/0x244 [ 1.251135] LR [c000000000051d30] .__cleanup_sighand+0x44/0x5c [ 1.251137] Call Trace: [ 1.251140] [c0000002763c3850] [c0000000004a19a0] 0xc0000000004a19a0 (unreliable) [ 1.251145] [c0000002763c3900] [c000000000051d30] .__cleanup_sighand+0x44/0x5c [ 1.251150] [c0000002763c3980] [c000000000057e74] .release_task+0x320/0x44c [ 1.251154] [c0000002763c3a20] [c000000000058714] .do_exit+0x774/0x820 [ 1.251158] [c0000002763c3af0] [c000000000020c54] .die+0x1c8/0x1cc [ 1.251163] [c0000002763c3b90] [c00000000002883c] .bad_page_fault+0xb8/0xd4 [ 1.251168] [c0000002763c3c10] [c000000000005318] handle_page_fault+0x3c/0x5c [ 1.251175] --- Exception: 300 at .tasklet_kill_immediate+0x38/0xb8 [ 1.251176] LR = .kthread+0x78/0xc4 [ 1.251180] [c0000002763c3f00] [c00000000006f918] .kthread+0x40/0xc4 (unreliable) [ 1.251185] [c0000002763c3f90] [c000000000022fe8] .kernel_thread+0x54/0x70 [ 1.251188] Instruction dump: [ 1.251190] 4800016d e97d0168 880d01dc 2fa00000 41be0010 7c0004ac 38000000 980d01dc [ 1.251196] 7c2004ac 38000000 900b0040 48000050 <817f0000> 801f0004 7f8b0040 409c001c [ 1.251202] ---[ end trace 31fd0ba7d8756002 ]--- [ 1.251205] Fixing recursive fault but reboot is needed! core99_setup_cpu 0 done