Using Sequoia machine description Linux version 2.6.25-rc9-dirty (paelzer@HeliosPrime.boeblingen.de.ibm.com) (gcc version 4.0.0 (DENX ELDK 4.1 4.0.0)) #7 Sun Apr 20 21:14:50 CEST 2008 Found legacy serial port 0 for /plb/opb/serial@ef600300 mem=1ef600300, taddr=1ef600300, irq=0, clk=11059200, speed=115200 Found legacy serial port 1 for /plb/opb/serial@ef600400 mem=1ef600400, taddr=1ef600400, irq=0, clk=11059200, speed=0 Found legacy serial port 2 for /plb/opb/serial@ef600500 mem=1ef600500, taddr=1ef600500, irq=0, clk=4385964, speed=0 Found legacy serial port 3 for /plb/opb/serial@ef600600 mem=1ef600600, taddr=1ef600600, irq=0, clk=4385964, speed=0 console [udbg0] enabled Entering add_active_range(0, 0, 65536) 0 entries of 256 used Top of RAM: 0x10000000, Total RAM: 0x10000000 Memory hole size: 0MB Zone PFN ranges: DMA 0 -> 65536 Normal 65536 -> 65536 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 65536 On node 0 totalpages: 65536 DMA zone: 512 pages used for memmap DMA zone: 0 pages reserved DMA zone: 65024 pages, LIFO batch:15 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: console=ttyS0,115200 ip=dhcp nfsroot=192.168.1.2:/home/paelzer/ubuntu_ppc root=/dev/nfs rw UIC0 (32 IRQ sources) at DCR 0xc0 UIC1 (32 IRQ sources) at DCR 0xd0 UIC2 (32 IRQ sources) at DCR 0xe0 PID hash table entries: 1024 (order: 10, 4096 bytes) time_init: decrementer frequency = 666.666660 MHz time_init: processor frequency = 666.666660 MHz clocksource: timebase mult[600000] shift[22] registered clockevent: decrementer mult[aaaa] shift[16] cpu[0] Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 255744k/262144k available (3448k kernel code, 6052k reserved, 152k data, 153k bss, 156k init) Calibrating delay loop... 1331.20 BogoMIPS (lpj=2662400) Mount-cache hash table entries: 512 net_namespace: 440 bytes NET: Registered protocol family 16 PCI host bridge /plb/pci@1ec000000 (primary) ranges: MEM 0x0000000180000000..0x000000018fffffff -> 0x0000000080000000 IO 0x00000001e8000000..0x00000001e80fffff -> 0x0000000000000000 4xx PCI DMA offset set to 0x00000000 PCI: Probing PCI hardware PCI: Hiding 4xx host bridge resources 0000:00:00.0 Try to map irq for 0000:00:00.0... -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 -> mapped to linux irq 16 Try to map irq for 0000:00:0a.0... -> got one, spec 2 cells (0x00000003 0x00000008...) on /interrupt-controller2 -> mapped to linux irq 16 Try to map irq for 0000:00:0a.1... PCI: PHB (bus 0) bridge rsrc 0: 0000000000000000-00000000000fffff [0x100], parent c0363060 (PCI IO) PCI: PHB (bus 0) bridge rsrc 1: 0000000180000000-000000018fffffff [0x200], parent c0363038 (PCI mem) PCI: Assigning unassigned resouces... PCI: pci_assign_resource - Failed to allocate mem resource #6:20000@190000000 for 0000:00:0a.0 PCI: pci_assign_resource - Failed to allocate mem resource #2:10000@190000000 for 0000:00:0a.0 PCI: pci_assign_resource - Failed to allocate mem resource #1:10000@190000000 for 0000:00:0a.1 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered radeonfb_pci_register BEGIN radeonfb_pci_register - resource0 0x1 - 0x80000000 radeonfb_pci_register - resource1 0x0 - 0x1000 radeonfb_pci_register - resource2 0x0 - 0x0 radeonfb_pci_register - got pci ressources fb_base_phys 0x1 mmio_base_phys 0x80000000 radeonfb_pci_register - call ioremap for base 0 and size 0 __ioremap(): phys addr 0x0 is RAM lr c029cf88 - mem_init_done 1 highmem@10000000 radeonfb (0000:00:0a.0): cannot map MMIO radeonfb: probe of 0000:00:0a.0 failed with error -5 Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.28.0 20060524 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0x1ef600300 (irq = 17) is a 16550A console handover: boot [udbg0] -> real [ttyS0] serial8250.0: ttyS1 at MMIO 0x1ef600400 (irq = 18) is a 16550A serial8250.0: ttyS2 at MMIO 0x1ef600500 (irq = 19) is a 16550A serial8250.0: ttyS3 at MMIO 0x1ef600600 (irq = 20) is a 16550A 1ef600300.serial: ttyS0 at MMIO 0x1ef600300 (irq = 17) is a 16550A 1ef600400.serial: ttyS1 at MMIO 0x1ef600400 (irq = 18) is a 16550A 1ef600500.serial: ttyS2 at MMIO 0x1ef600500 (irq = 19) is a 16550A 1ef600600.serial: ttyS3 at MMIO 0x1ef600600 (irq = 20) is a 16550A brd: module loaded PPC 4xx OCP EMAC driver, version 3.54 MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels ZMII /plb/opb/emac-zmii@ef600d00 initialized RGMII /plb/opb/emac-rgmii@ef601000 initialized with MDIO support /plb/opb/emac-rgmii@ef601000: input 0 in RGMII mode eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:10:ec:00:e2:3e eth0: found Marvell 88E1111 Ethernet PHY (0x00) /plb/opb/emac-rgmii@ef601000: input 1 in RGMII mode eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:10:ec:80:e2:3e eth1: found Marvell 88E1111 Ethernet PHY (0x01) tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Driver 'sd' needs updating - please use bus_type methods 1fc000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 1fc000000.nor_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available of-flash: probe of 1fc000000.nor_flash failed with error -22 ppc-of-ehci e0000300.ehci: OF EHCI ppc-of-ehci e0000300.ehci: new USB bus registered, assigned bus number 1 ppc-of-ehci e0000300.ehci: irq 32, io mem 0xe0000300 ppc-of-ehci e0000300.ehci: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OF EHCI usb usb1: Manufacturer: Linux 2.6.25-rc9-dirty ehci_hcd usb usb1: SerialNumber: PPC-OF USB USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usb 1-1: new high speed USB device using ppc-of-ehci and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: USB2.0 Hub usb 1-1.1: new low speed USB device using ppc-of-ehci and address 3 usb 1-1.1: configuration #1 chosen from 1 choice usb 1-1.1: New USB device found, idVendor=04b3, idProduct=310c usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-1.1: Product: USB Optical Mouse usb 1-1.2: new full speed USB device using ppc-of-ehci and address 4 usb 1-1.2: configuration #1 chosen from 1 choice hub 1-1.2:1.0: USB hub found hub 1-1.2:1.0: 2 ports detected usb 1-1.2: New USB device found, idVendor=04b3, idProduct=3022 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: IBM Preferred Pro USB Fingerprint Keyboard usb 1-1.2: Manufacturer: Chicony usb 1-1.2.1: new full speed USB device using ppc-of-ehci and address 5 usb 1-1.2.1: configuration #1 chosen from 1 choice usb 1-1.2.1: New USB device found, idVendor=04b3, idProduct=3021 usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2.1: Product: IBM Preferred Pro USB Fingerprint Keyboard usb 1-1.2.1: Manufacturer: Chicony usb 1-1.2.2: new full speed USB device using ppc-of-ehci and address 6 usb 1-1.2.2: configuration #1 chosen from 1 choice usb 1-1.2.2: New USB device found, idVendor=0483, idProduct=2016 usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2.2: Product: Biometric Coprocessor usb 1-1.2.2: Manufacturer: STMicroelectronics usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual mice: PS/2 mouse device common for all mice input: USB Optical Mouse as /class/input/input0 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-PPC-OF USB-1.1 input: Chicony IBM Preferred Pro USB Fingerprint Keyboard as /class/input/input1 input: USB HID v1.10 Keyboard [Chicony IBM Preferred Pro USB Fingerprint Keyboard] on usb-PPC-OF USB-1.2.1 HID device claimed by neither input, hiddev nor hidraw usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using timer interrupt. Netfilter messages via NETLINK v0.30. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered RPC: Registered udp transport module. RPC: Registered tcp transport module. drivers/rtc/hctosys.c: unable to open rtc device (rtc0) eth0: link is up, 100 FDX, pause enabled eth1: link is up, 100 FDX, pause enabled Sending DHCP requests ., OK IP-Config: Got DHCP answer from 192.168.1.2, my address is 192.168.1.3 IP-Config: Complete: device=eth0, addr=192.168.1.3, mask=255.255.255.0, gw=192.168.1.2, host=192.168.1.3, domain=local-devnet, nis-domain=(none), bootserver=192.168.1.2, rootserver=192.168.1.2, rootpath= Looking up port of RPC 100003/2 on 192.168.1.2 Looking up port of RPC 100005/1 on 192.168.1.2 VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 156k init eth1: link is up, 100 FDX, pause enabled swapon: swapfile has holes warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) Machine check in kernel mode. Data Read PLB Error Machine check in kernel mode. Data Read PLB Error Machine check in kernel mode. Data Read PLB Error rpcbind: server localhost not responding, timed out RPC: failed to contact local rpcbind server (errno 5). rpcbind: server localhost not responding, timed out RPC: failed to contact local rpcbind server (errno 5). lockd_up: makesock failed, error=-5 rpcbind: server localhost not responding, timed out RPC: failed to contact local rpcbind server (errno 5).