diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 0d701c1..09b4e16 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -258,6 +258,21 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <3000 400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0:ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
 		};
 
 		ata@3a00 {
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 58b71e6..fe59c27 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -1057,6 +1057,7 @@ static int mpc52xx_fec_of_resume(struct of_device *op)
 #endif
 
 static struct of_device_id mpc52xx_fec_match[] = {
+	{ .type = "network", .compatible = "fsl,mpc5200b-fec", },
 	{ .type = "network", .compatible = "fsl,mpc5200-fec", },
 	{ .type = "network", .compatible = "mpc5200-fec", },
 	{ }
diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c
index 6a3ac4e..1d0cd1d 100644
--- a/drivers/net/fec_mpc52xx_phy.c
+++ b/drivers/net/fec_mpc52xx_phy.c
@@ -179,6 +179,7 @@ static int mpc52xx_fec_mdio_remove(struct of_device *of)
 
 static struct of_device_id mpc52xx_fec_mdio_match[] = {
 	{ .compatible = "fsl,mpc5200b-mdio", },
+	{ .compatible = "fsl,mpc5200-mdio", },
 	{ .compatible = "mpc5200b-fec-phy", },
 	{}
 };