The 'fabric' is the thing that pulls all of snd-aoa together, this patch
adds the 'layout' or 'layout-id' fabric that keys off the 'layout-id'
property in the device-tree to pull in the proper modules. It itself loads
if an i2sbus is present with a layout-id (exported in modalias) that it can
use.

--- /dev/null
+++ b/sound/aoa/fabrics/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SND_AOA_FABRIC_LAYOUT) += snd-aoa-fabric-layout.o
--- /dev/null
+++ b/sound/aoa/fabrics/Kconfig
@@ -0,0 +1,12 @@
+config SND_AOA_FABRIC_LAYOUT
+	tristate "layout-id fabric"
+	depends SND_AOA
+	select SND_AOA_SOUNDBUS
+	select SND_AOA_SOUNDBUS_I2S
+	---help---
+	This enables the layout-id fabric for the Apple Onboard
+	Audio driver, the module holding it all together
+	based on the device-tree's layout-id property.
+	
+	If you are unsure and have a later Apple machine,
+	compile it as a module.
--- /dev/null
+++ b/sound/aoa/fabrics/snd-aoa-fabric-layout.c
@@ -0,0 +1,1096 @@
+/*
+ * Apple Onboard Audio driver -- layout fabric
+ *
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * GPL v2, can be found in COPYING.
+ *
+ *
+ * This fabric module looks for sound codecs
+ * based on the layout-id property in the device tree.
+ *
+ */
+
+#include <asm/prom.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include "../aoa.h"
+#include "../soundbus/soundbus.h"
+
+MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Layout-ID fabric for snd-aoa");
+
+#define MAX_CODECS_PER_BUS	2
+
+/* These are the connections the layout fabric
+ * knows about. It doesn't really care about the
+ * input ones, but I thought I'd separate them
+ * to give them proper names. The thing is that
+ * Apple usually will distinguish the active output
+ * by GPIOs, while the active input is set directly
+ * on the codec. Hence we here tell the codec what
+ * we think is connected. This information is hard-
+ * coded below ... */
+#define CC_SPEAKERS	(1<<0)
+#define CC_HEADPHONE	(1<<1)
+#define CC_LINEOUT	(1<<2)
+#define CC_DIGITALOUT	(1<<3)
+#define CC_LINEIN	(1<<4)
+#define CC_MICROPHONE	(1<<5)
+#define CC_DIGITALIN	(1<<6)
+/* pretty bogus but users complain...
+ * This is a flag saying that the LINEOUT
+ * should be renamed to HEADPHONE.
+ * be careful with input detection! */
+#define CC_LINEOUT_LABELLED_HEADPHONE	(1<<7)
+
+struct codec_connection {
+	/* CC_ flags from above */
+	int connected;
+	/* codec dependent bit to be set in the aoa_codec.connected field.
+	 * This intentionally doesn't have any generic flags because the
+	 * fabric has to know the codec anyway and all codecs might have
+	 * different connectors */
+	int codec_bit;
+};
+
+struct codec_connect_info {
+	char *name;
+	struct codec_connection *connections;
+};
+
+#define LAYOUT_FLAG_COMBO_LINEOUT_SPDIF	(1<<0)
+
+struct layout {
+	unsigned int layout_id;
+	struct codec_connect_info codecs[MAX_CODECS_PER_BUS];
+	int flags;
+	
+	/* if busname is not assigned, we use 'Master' below,
+	 * so that our layout table doesn't need to be filled
+	 * too much.
+	 * We only assign these two if we expect to find more
+	 * than one soundbus, i.e. on those machines with
+	 * multiple layout-ids */
+	char *busname;
+	int pcmid;
+};
+
+MODULE_ALIAS("sound-layout-41");
+MODULE_ALIAS("sound-layout-45");
+MODULE_ALIAS("sound-layout-51");
+MODULE_ALIAS("sound-layout-58");
+MODULE_ALIAS("sound-layout-60");
+MODULE_ALIAS("sound-layout-61");
+MODULE_ALIAS("sound-layout-64");
+MODULE_ALIAS("sound-layout-65");
+MODULE_ALIAS("sound-layout-68");
+MODULE_ALIAS("sound-layout-69");
+MODULE_ALIAS("sound-layout-70");
+MODULE_ALIAS("sound-layout-72");
+MODULE_ALIAS("sound-layout-80");
+MODULE_ALIAS("sound-layout-82");
+MODULE_ALIAS("sound-layout-84");
+MODULE_ALIAS("sound-layout-86");
+MODULE_ALIAS("sound-layout-92");
+
+/* onyx with all but microphone connected */
+static struct codec_connection onyx_connections_nomic[] = {
+	{
+		.connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_DIGITALOUT,
+		.codec_bit = 1,
+	},
+	{
+		.connected = CC_LINEIN,
+		.codec_bit = 2,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+/* onyx on machines without headphone */
+static struct codec_connection onyx_connections_noheadphones[] = {
+	{
+		.connected = CC_SPEAKERS | CC_LINEOUT |
+			     CC_LINEOUT_LABELLED_HEADPHONE,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_DIGITALOUT,
+		.codec_bit = 1,
+	},
+	/* FIXME: are these correct? probably not for all the machines
+	 * below ... If not this will need separating. */
+	{
+		.connected = CC_LINEIN,
+		.codec_bit = 2,
+	},
+	{
+		.connected = CC_MICROPHONE,
+		.codec_bit = 3,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+/* onyx on machines with real line-out */
+static struct codec_connection onyx_connections_reallineout[] = {
+	{
+		.connected = CC_SPEAKERS | CC_LINEOUT | CC_HEADPHONE,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_DIGITALOUT,
+		.codec_bit = 1,
+	},
+	{
+		.connected = CC_LINEIN,
+		.codec_bit = 2,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines without line out */
+static struct codec_connection tas_connections_nolineout[] = {
+	{
+		.connected = CC_SPEAKERS | CC_HEADPHONE,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_LINEIN,
+		.codec_bit = 2,
+	},
+	{
+		.connected = CC_MICROPHONE,
+		.codec_bit = 3,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines with neither line out nor line in */
+static struct codec_connection tas_connections_noline[] = {
+	{
+		.connected = CC_SPEAKERS | CC_HEADPHONE,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_MICROPHONE,
+		.codec_bit = 3,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines without microphone */
+static struct codec_connection tas_connections_nomic[] = {
+	{
+		.connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_LINEIN,
+		.codec_bit = 2,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+/* tas on machines with everything connected */
+static struct codec_connection tas_connections_all[] = {
+	{
+		.connected = CC_SPEAKERS | CC_HEADPHONE | CC_LINEOUT,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_LINEIN,
+		.codec_bit = 2,
+	},
+	{
+		.connected = CC_MICROPHONE,
+		.codec_bit = 3,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection toonie_connections[] = {
+	{
+		.connected = CC_SPEAKERS | CC_HEADPHONE,
+		.codec_bit = 0,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection topaz_input[] = {
+	{
+		.connected = CC_DIGITALIN,
+		.codec_bit = 0,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection topaz_output[] = {
+	{
+		.connected = CC_DIGITALOUT,
+		.codec_bit = 1,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+static struct codec_connection topaz_inout[] = {
+	{
+		.connected = CC_DIGITALIN,
+		.codec_bit = 0,
+	},
+	{
+		.connected = CC_DIGITALOUT,
+		.codec_bit = 1,
+	},
+	{} /* terminate array by .connected == 0 */
+};
+
+static struct layout layouts[] = {
+	/* last PowerBooks (15" Oct 2005) */
+	{ .layout_id = 82,
+	  .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	  .codecs[1] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	/* PowerMac9,1 */
+	{ .layout_id = 60,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_reallineout,
+	  },
+	},
+	/* PowerMac9,1 */
+	{ .layout_id = 61,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	/* PowerBook5,7 */
+	{ .layout_id = 64,
+	  .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	},
+	/* PowerBook5,7 */
+	{ .layout_id = 65,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	/* PowerBook5,9 [17" Oct 2005] */
+	{ .layout_id = 84,
+	  .flags = LAYOUT_FLAG_COMBO_LINEOUT_SPDIF,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	  .codecs[1] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	/* PowerMac8,1 */
+	{ .layout_id = 45,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	  .codecs[1] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	/* Quad PowerMac (analog in, analog/digital out) */
+	{ .layout_id = 68,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_nomic,
+	  },
+	},
+	/* Quad PowerMac (digital in) */
+	{ .layout_id = 69,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	  .busname = "digital in", .pcmid = 1 },
+	/* Early 2005 PowerBook (PowerBook 5,6) */
+	{ .layout_id = 70,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_nolineout,
+	  },
+	},
+	/* PowerBook 5,4 */
+	{ .layout_id = 51,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_nolineout,
+	  },
+	},
+	/* PowerBook6,7 */
+	{ .layout_id = 80,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_noline,
+	  },
+	},
+	/* PowerBook6,8 */
+	{ .layout_id = 72,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_nolineout,
+	  },
+	},
+	/* PowerMac8,2 */
+	{ .layout_id = 86,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_nomic,
+	  },
+	  .codecs[1] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	/* PowerBook6,7 */
+	{ .layout_id = 92,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_nolineout,
+	  },
+	},
+	/* PowerMac10,1 (Mac Mini) */
+	{ .layout_id = 58,
+	  .codecs[0] = {
+		.name = "toonie",
+		.connections = toonie_connections,
+	  },
+	},
+	/* unknown, untested, but this comes from Apple */
+	{ .layout_id = 41,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_all,
+	  },
+	},
+	{ .layout_id = 36,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_nomic,
+	  },
+	  .codecs[1] = {
+		.name = "topaz",
+		.connections = topaz_inout,
+	  },
+	},
+	{ .layout_id = 47,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	},
+	{ .layout_id = 48,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	{ .layout_id = 49,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_nomic,
+	  },
+	},
+	{ .layout_id = 50,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	{ .layout_id = 56,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	},
+	{ .layout_id = 57,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	{ .layout_id = 62,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	  .codecs[1] = {
+		.name = "topaz",
+		.connections = topaz_output,
+	  },
+	},
+	{ .layout_id = 66,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	},
+	{ .layout_id = 67,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	},
+	{ .layout_id = 76,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_nomic,
+	  },
+	  .codecs[1] = {
+		.name = "topaz",
+		.connections = topaz_inout,
+	  },
+	},
+	{ .layout_id = 90,
+	  .codecs[0] = {
+		.name = "tas",
+		.connections = tas_connections_noline,
+	  },
+	},
+	{ .layout_id = 94,
+	  .codecs[0] = {
+		.name = "onyx",
+		/* but it has an external mic?? how to select? */
+		.connections = onyx_connections_noheadphones,
+	  },
+	},
+	{ .layout_id = 96,
+	  .codecs[0] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	},
+	{ .layout_id = 98,
+	  .codecs[0] = {
+		.name = "toonie",
+		.connections = toonie_connections,
+	  },
+	},
+	{ .layout_id = 100,
+	  .codecs[0] = {
+		.name = "topaz",
+		.connections = topaz_input,
+	  },
+	  .codecs[1] = {
+		.name = "onyx",
+		.connections = onyx_connections_noheadphones,
+	  },
+	},
+	{}
+};
+
+static struct layout *find_layout_by_id(unsigned int id)
+{
+	struct layout *l;
+
+	l = layouts;
+	while (l->layout_id) {
+		if (l->layout_id == id)
+			return l;
+		l++;
+	}
+	return NULL;
+}
+
+static void use_layout(struct layout *l)
+{
+	int i;
+
+	for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+		if (l->codecs[i].name) {
+			request_module("snd-aoa-codec-%s", l->codecs[i].name);
+		}
+	}
+	/* now we wait for the codecs to call us back */
+}
+
+struct layout_dev;
+
+struct layout_dev_ptr {
+	struct layout_dev *ptr;
+};
+
+struct layout_dev {
+	struct list_head list;
+	struct soundbus_dev *sdev;
+	struct device_node *sound;
+	struct aoa_codec *codecs[MAX_CODECS_PER_BUS];
+	struct layout *layout;
+	struct gpio_runtime gpio;
+
+	/* we need these for headphone/lineout detection */
+	struct snd_kcontrol *headphone_ctrl;
+	struct snd_kcontrol *lineout_ctrl;
+	struct snd_kcontrol *speaker_ctrl;
+	struct snd_kcontrol *headphone_detected_ctrl;
+	struct snd_kcontrol *lineout_detected_ctrl;
+
+	struct layout_dev_ptr selfptr_headphone;
+	struct layout_dev_ptr selfptr_lineout;
+
+	u32 have_lineout_detect:1,
+	    have_headphone_detect:1,
+	    switch_on_headphone:1,
+	    switch_on_lineout:1;
+};
+
+static LIST_HEAD(layouts_list);
+static int layouts_list_items;
+/* this can go away but only if we allow multiple cards,
+ * make the fabric handle all the card stuff, etc... */
+static struct layout_dev *layout_device;
+
+static int control_info(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_info *uinfo)
+{
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+	uinfo->count = 1;
+	uinfo->value.integer.min = 0;
+	uinfo->value.integer.max = 1;
+	return 0;
+}
+
+#define AMP_CONTROL(n, description)					\
+static int n##_control_get(struct snd_kcontrol *kcontrol,		\
+			   struct snd_ctl_elem_value *ucontrol)		\
+{									\
+	struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol);	\
+	if (gpio->methods && gpio->methods->get_##n)			\
+		ucontrol->value.integer.value[0] =			\
+			gpio->methods->get_##n(gpio);			\
+	return 0;							\
+}									\
+static int n##_control_put(struct snd_kcontrol *kcontrol,		\
+			   struct snd_ctl_elem_value *ucontrol)		\
+{									\
+	struct gpio_runtime *gpio = snd_kcontrol_chip(kcontrol);	\
+	if (gpio->methods && gpio->methods->get_##n)			\
+		gpio->methods->set_##n(gpio,				\
+			ucontrol->value.integer.value[0]);		\
+	return 1;							\
+}									\
+static struct snd_kcontrol_new n##_ctl = {				\
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,				\
+	.name = description,						\
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,                      \
+	.info = control_info,						\
+	.get = n##_control_get,						\
+	.put = n##_control_put,						\
+}
+
+AMP_CONTROL(headphone, "Headphone Switch");
+AMP_CONTROL(speakers, "Speakers Switch");
+AMP_CONTROL(lineout, "Line-Out Switch");
+
+static int detect_choice_get(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
+
+	switch (kcontrol->private_value) {
+	case 0:
+		ucontrol->value.integer.value[0] = ldev->switch_on_headphone;
+		break;
+	case 1:
+		ucontrol->value.integer.value[0] = ldev->switch_on_lineout;
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int detect_choice_put(struct snd_kcontrol *kcontrol,
+			     struct snd_ctl_elem_value *ucontrol)
+{
+	struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
+
+	switch (kcontrol->private_value) {
+	case 0:
+		ldev->switch_on_headphone = !!ucontrol->value.integer.value[0];
+		break;
+	case 1:
+		ldev->switch_on_lineout = !!ucontrol->value.integer.value[0];
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 1;
+}
+
+static struct snd_kcontrol_new headphone_detect_choice = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Headphone Detect Autoswitch",
+	.info = control_info,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.get = detect_choice_get,
+	.put = detect_choice_put,
+	.private_value = 0,
+};
+
+static struct snd_kcontrol_new lineout_detect_choice = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Line-Out Detect Autoswitch",
+	.info = control_info,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+	.get = detect_choice_get,
+	.put = detect_choice_put,
+	.private_value = 1,
+};
+
+static int detected_get(struct snd_kcontrol *kcontrol,
+			struct snd_ctl_elem_value *ucontrol)
+{
+	struct layout_dev *ldev = snd_kcontrol_chip(kcontrol);
+	int v;
+
+	switch (kcontrol->private_value) {
+	case 0:
+		v = ldev->gpio.methods->get_detect(&ldev->gpio,
+						   AOA_NOTIFY_HEADPHONE);
+		break;
+	case 1:
+		v = ldev->gpio.methods->get_detect(&ldev->gpio,
+						   AOA_NOTIFY_LINE_OUT);
+		break;
+	default:
+		return -ENODEV;
+	}
+	ucontrol->value.integer.value[0] = v;
+	return 0;
+}
+
+static struct snd_kcontrol_new headphone_detected = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Headphone Detected",
+	.info = control_info,
+	.access = SNDRV_CTL_ELEM_ACCESS_READ,
+	.get = detected_get,
+	.private_value = 0,
+};
+
+static struct snd_kcontrol_new lineout_detected = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Line-Out Detected",
+	.info = control_info,
+	.access = SNDRV_CTL_ELEM_ACCESS_READ,
+	.get = detected_get,
+	.private_value = 1,
+};
+
+static int check_codec(struct aoa_codec *codec, struct layout_dev *ldev, struct codec_connect_info *cci)
+{
+	u32 *ref;
+	char propname[32];
+	struct codec_connection *cc;
+
+	if (codec->node) {
+		snprintf(propname, sizeof(propname), "platform-%s-codec-ref", codec->name);
+		ref = (u32*)get_property(ldev->sound, propname, NULL);
+		/* if the codec has a node, we require a reference */
+		if (!ref) {
+			printk(KERN_INFO "snd-aoa-fabric-layout: required property %s not present\n", propname);
+			return -ENODEV;
+		}
+		if (*ref != codec->node->linux_phandle) {
+			printk(KERN_INFO "snd-aoa-fabric-layout: %s doesn't match!\n", propname);
+			return -ENODEV;
+		}
+	} else {
+		if (layouts_list_items != 1) {
+			printk(KERN_INFO "snd-aoa-fabric-layout: more than one soundbus, but no references. eek!\n");
+			return -ENODEV;
+		}
+	}
+	codec->soundbus_dev = ldev->sdev;
+	codec->gpio = &ldev->gpio;
+
+	cc = cci->connections;
+	if (!cc)
+		return -EINVAL;
+
+	printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n");
+
+	codec->connected = 0;
+	codec->fabric_data = cc;
+
+	while (cc->connected) {
+		codec->connected |= 1<<cc->codec_bit;
+		cc++;
+	}
+
+	return 0;
+}
+
+static int layout_found_codec(struct aoa_codec *codec)
+{
+	struct layout_dev *ldev;
+	int i;
+
+	list_for_each_entry(ldev, &layouts_list, list) {
+		for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+			if (!ldev->layout->codecs[i].name)
+				continue;
+			if (strcmp(ldev->layout->codecs[i].name, codec->name) == 0) {
+				if (check_codec(codec, ldev, &ldev->layout->codecs[i]) == 0)
+					return 0;
+			}
+		}
+	}
+	return -ENODEV;
+}
+
+static void layout_remove_codec(struct aoa_codec *codec)
+{
+	int i;
+	/* here remove the codec from the layout dev's
+	 * codec reference */
+
+	codec->soundbus_dev = NULL;
+	codec->gpio = NULL;
+	for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+	}
+}
+
+static void layout_notify(void *data)
+{
+	struct layout_dev_ptr *dptr = data;
+	struct layout_dev *ldev;
+	int v, update;
+	struct snd_kcontrol *detected, *c;
+	struct snd_card *card = aoa_get_card();
+
+	ldev = dptr->ptr;
+	if (data == &ldev->selfptr_headphone) {
+		v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_HEADPHONE);
+		detected = ldev->headphone_detected_ctrl;
+		update = ldev->switch_on_headphone;
+		if (update) {
+			ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
+			ldev->gpio.methods->set_headphone(&ldev->gpio, v);
+			ldev->gpio.methods->set_lineout(&ldev->gpio, 0);
+		}
+	} else if (data == &ldev->selfptr_lineout) {
+		v = ldev->gpio.methods->get_detect(&ldev->gpio, AOA_NOTIFY_LINE_OUT);
+		detected = ldev->lineout_detected_ctrl;
+		update = ldev->switch_on_lineout;
+		if (update) {
+			ldev->gpio.methods->set_speakers(&ldev->gpio, !v);
+			ldev->gpio.methods->set_headphone(&ldev->gpio, 0);
+			ldev->gpio.methods->set_lineout(&ldev->gpio, v);
+		}
+	} else
+		return;
+
+	if (detected)
+		snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &detected->id);
+	if (update) {
+		c = ldev->headphone_ctrl;
+		if (c)
+			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
+		c = ldev->speaker_ctrl;
+		if (c)
+			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
+		c = ldev->lineout_ctrl;
+		if (c)
+			snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &c->id);
+	}
+}
+
+static void layout_attached_codec(struct aoa_codec *codec)
+{
+	struct codec_connection *cc;
+	struct snd_kcontrol *ctl;
+	int headphones, lineout;
+	struct layout_dev *ldev = layout_device;
+
+	/* need to add this codec to our codec array! */
+
+	cc = codec->fabric_data;
+
+	headphones = codec->gpio->methods->get_detect(codec->gpio,
+						      AOA_NOTIFY_HEADPHONE);
+ 	lineout = codec->gpio->methods->get_detect(codec->gpio,
+						   AOA_NOTIFY_LINE_OUT);
+
+	while (cc->connected) {
+		if (cc->connected & CC_SPEAKERS) {
+			if (headphones <= 0 && lineout <= 0)
+				ldev->gpio.methods->set_speakers(codec->gpio, 1);
+			ctl = snd_ctl_new1(&speakers_ctl, codec->gpio);
+			ldev->speaker_ctrl = ctl;
+			aoa_snd_ctl_add(ctl);
+		}
+		if (cc->connected & CC_HEADPHONE) {
+			if (headphones == 1)
+				ldev->gpio.methods->set_headphone(codec->gpio, 1);
+			ctl = snd_ctl_new1(&headphone_ctl, codec->gpio);
+			ldev->headphone_ctrl = ctl;
+			aoa_snd_ctl_add(ctl);
+			ldev->have_headphone_detect =
+				!ldev->gpio.methods
+					->set_notify(&ldev->gpio,
+						     AOA_NOTIFY_HEADPHONE,
+						     layout_notify,
+						     &ldev->selfptr_headphone);
+			if (ldev->have_headphone_detect) {
+				ctl = snd_ctl_new1(&headphone_detect_choice,
+						   ldev);
+				aoa_snd_ctl_add(ctl);
+				ctl = snd_ctl_new1(&headphone_detected,
+						   ldev);
+				ldev->headphone_detected_ctrl = ctl;
+				aoa_snd_ctl_add(ctl);
+			}
+		}
+		if (cc->connected & CC_LINEOUT) {
+			if (lineout == 1)
+				ldev->gpio.methods->set_lineout(codec->gpio, 1);
+			ctl = snd_ctl_new1(&lineout_ctl, codec->gpio);
+			if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
+				strlcpy(ctl->id.name,
+					"Headphone Switch", sizeof(ctl->id.name));
+			ldev->lineout_ctrl = ctl;
+			aoa_snd_ctl_add(ctl);
+			ldev->have_lineout_detect =
+				!ldev->gpio.methods
+					->set_notify(&ldev->gpio,
+						     AOA_NOTIFY_LINE_OUT,
+						     layout_notify,
+						     &ldev->selfptr_lineout);
+			if (ldev->have_lineout_detect) {
+				ctl = snd_ctl_new1(&lineout_detect_choice,
+						   ldev);
+				if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
+					strlcpy(ctl->id.name,
+						"Headphone Detect Autoswitch",
+						sizeof(ctl->id.name));
+				aoa_snd_ctl_add(ctl);
+				ctl = snd_ctl_new1(&lineout_detected,
+						   ldev);
+				if (cc->connected & CC_LINEOUT_LABELLED_HEADPHONE)
+					strlcpy(ctl->id.name,
+						"Headphone Detected",
+						sizeof(ctl->id.name));
+				ldev->lineout_detected_ctrl = ctl;
+				aoa_snd_ctl_add(ctl);
+			}
+		}
+		cc++;
+	}
+}
+
+static struct aoa_fabric layout_fabric = {
+	.name = "SoundByLayout",
+	.owner = THIS_MODULE,
+	.found_codec = layout_found_codec,
+	.remove_codec = layout_remove_codec,
+	.attached_codec = layout_attached_codec,
+};
+
+static int aoa_fabric_layout_probe(struct soundbus_dev *sdev)
+{
+	struct device_node *sound = NULL;
+	unsigned int *layout_id;
+	struct layout *layout;
+	struct layout_dev *ldev = NULL;
+	int err;
+
+	/* hm, currently we can only have one ... */
+	if (layout_device)
+		return -ENODEV;
+
+	/* by breaking out we keep a reference */
+	while ((sound = of_get_next_child(sdev->ofdev.node, sound))) {
+		if (sound->type && strcasecmp(sound->type, "soundchip") == 0)
+			break;
+	}
+	if (!sound) return -ENODEV;
+
+	layout_id = (unsigned int *) get_property(sound, "layout-id", NULL);
+	if (!layout_id)
+		goto outnodev;
+	printk(KERN_INFO "snd-aoa-fabric-layout: found bus with layout %d ", *layout_id);
+
+	layout = find_layout_by_id(*layout_id);
+	if (!layout) {
+		printk("(no idea how to handle)\n");
+		goto outnodev;
+	}
+
+	ldev = kzalloc(sizeof(struct layout_dev), GFP_KERNEL);
+	if (!ldev)
+		goto outnodev;
+
+	layout_device = ldev;
+	ldev->sdev = sdev;
+	ldev->sound = sound;
+	ldev->layout = layout;
+	ldev->gpio.node = sound->parent;
+	switch (layout->layout_id) {
+	case 41: /* that unknown machine no one seems to have */
+	case 51: /* PowerBook5,4 */
+	case 58: /* Mac Mini */
+		ldev->gpio.methods = ftr_gpio_methods;
+		break;
+	default:
+		ldev->gpio.methods = pmf_gpio_methods;
+	}
+	ldev->selfptr_headphone.ptr = ldev;
+	ldev->selfptr_lineout.ptr = ldev;
+	sdev->ofdev.dev.driver_data = ldev;
+
+	printk("(using)\n");
+	list_add(&ldev->list, &layouts_list);
+	layouts_list_items++;
+
+	/* assign these before registering ourselves, so
+	 * callbacks that are done during registration
+	 * already have the values */
+	sdev->pcmid = ldev->layout->pcmid;
+	if (ldev->layout->busname) {
+		sdev->pcmname = ldev->layout->busname;
+	} else {
+		sdev->pcmname = "Master";
+	}
+
+	ldev->gpio.methods->init(&ldev->gpio);
+
+	err = aoa_fabric_register(&layout_fabric);
+	if (err && err != -EALREADY) {
+		printk(KERN_INFO "snd-aoa-fabric-layout: can't use,"
+				 " another fabric is active!\n");
+		goto outlistdel;
+	}
+
+	use_layout(layout);
+	ldev->switch_on_headphone = 1;
+	ldev->switch_on_lineout = 1;
+	return 0;
+ outlistdel:
+	/* we won't be using these then... */
+	ldev->gpio.methods->exit(&ldev->gpio);
+	/* reset if we didn't use it */
+	sdev->pcmname = NULL;
+	sdev->pcmid = -1;
+	list_del(&ldev->list);
+	layouts_list_items--;
+ outnodev:
+ 	if (sound) of_node_put(sound);
+ 	layout_device = NULL;
+ 	if (ldev) kfree(ldev);
+	return -ENODEV;
+}
+
+static int aoa_fabric_layout_remove(struct soundbus_dev *sdev)
+{
+	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+	int i;
+
+	for (i=0; i<MAX_CODECS_PER_BUS; i++) {
+		if (ldev->codecs[i]) {
+			aoa_fabric_unlink_codec(ldev->codecs[i]);
+		}
+		ldev->codecs[i] = NULL;
+	}
+	list_del(&ldev->list);
+	layouts_list_items--;
+	of_node_put(ldev->sound);
+
+	ldev->gpio.methods->set_notify(&ldev->gpio,
+				       AOA_NOTIFY_HEADPHONE,
+				       NULL,
+				       NULL);
+	ldev->gpio.methods->set_notify(&ldev->gpio,
+				       AOA_NOTIFY_LINE_OUT,
+				       NULL,
+				       NULL);
+
+	ldev->gpio.methods->exit(&ldev->gpio);
+	layout_device = NULL;
+	kfree(ldev);
+	sdev->pcmid = -1;
+	sdev->pcmname = NULL;
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int aoa_fabric_layout_suspend(struct soundbus_dev *sdev, pm_message_t state)
+{
+	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+
+	printk("aoa_fabric_layout_suspend()\n");
+
+	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
+		ldev->gpio.methods->all_amps_off(&ldev->gpio);
+
+	return 0;
+}
+
+static int aoa_fabric_layout_resume(struct soundbus_dev *sdev)
+{
+	struct layout_dev *ldev = sdev->ofdev.dev.driver_data;
+
+	printk("aoa_fabric_layout_resume()\n");
+
+	if (ldev->gpio.methods && ldev->gpio.methods->all_amps_off)
+		ldev->gpio.methods->all_amps_restore(&ldev->gpio);
+
+	return 0;
+}
+#endif
+
+static struct soundbus_driver aoa_soundbus_driver = {
+	.name = "snd_aoa_soundbus_drv",
+	.owner = THIS_MODULE,
+	.probe = aoa_fabric_layout_probe,
+	.remove = aoa_fabric_layout_remove,
+#ifdef CONFIG_PM
+	.suspend = aoa_fabric_layout_suspend,
+	.resume = aoa_fabric_layout_resume,
+#endif
+};
+
+static int __init aoa_fabric_layout_init(void)
+{
+	int err;
+
+	err = soundbus_register_driver(&aoa_soundbus_driver);
+	if (err)
+		return err;
+	return 0;
+}
+
+static void __exit aoa_fabric_layout_exit(void)
+{
+	soundbus_unregister_driver(&aoa_soundbus_driver);
+	aoa_fabric_unregister(&layout_fabric);
+}
+
+module_init(aoa_fabric_layout_init);
+module_exit(aoa_fabric_layout_exit);

--