<div>Dear All</div>
<div> </div>
<div>I am working on PowerPC 8266 ADS-PCI board</div>
<div> </div>
<div>
<div>with Montavista Linux with 2.4.20 Kernel to make SCC1, SMC 1& 2 </div>
<div> </div>
<div>in UART mode, SCC2, 3 & 4 in Ethernet mode, and FCC 2 in Fast </div></div>
<div> </div>
<div>Ethernet Mode; all in NMSI and not TDM. The drivers provided with </div>
<div> </div>
<div>2.4.20 Linux on Power PC were refered and reused.</div>
<div> </div>
<div><a href="http://lxr.linux.no/source/arch/ppc/8260_io/?v=2.4.20;a=ppc">http://lxr.linux.no/source/arch/ppc/8260_io/?v=2.4.20;a=ppc</a> </div>
<div> </div>
<div>
<div>When there are only 3 SCCs used in Ethernet mode and the last </div>
<div> </div>
<div>SCC in UART mode then the system works well. </div>
<div> </div></div>
<div>But when 2 more SMC are added to the UART serial driver, the SCC </div>
<div> </div>
<div>Ethernet network driver is not working after all ports working for a while.</div>
<div> </div>
<div>I will be appreciate to hear any pointers and hints.</div>
<div> </div>
<div>Thanks in advance.</div>
<div> </div>
<div>Sincerley</div>
<div> </div>
<div>Aung</div>
<div> </div>