<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"><HTML DIR=ltr><HEAD><META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1"></HEAD><BODY>
<DIV dir=ltr id=idOWAReplyText33986>
<DIV dir=ltr><FONT color=#000000 face=Arial size=2> </FONT></DIV>
<DIV dir=ltr><FONT color=#000000 face=Arial size=2> HI ,</FONT></DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>i am trying to use Ram disk with my mpc8247
board and compiled both the linux kernel image and the ramdisk image and tried
to load it on to the board when i try doing this i am getting a familiar
error which is know to all hangs after uncompressing linux kernel
... actually so please do tell me what might be the problem as we are
using SMC as the console .</FONT></DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>=> bootm 100000 b00000<BR>## Booting
image at 00100000 ...<BR> Image Name:
Linux-2.4.20_mvl31-8272ads<BR> Image Type: PowerPC Linux
Kernel Image (gzip compressed)<BR> Data Size:
680207 Bytes = 664.3 kB<BR> Load Address: 00000000<BR>
Entry Point: 00000000<BR> Verifying Checksum ...
OK<BR> Uncompressing Kernel Image ... OK<BR>## Current stack ends at
0x0FBC18D8 => set upper limit to 0x00800000<BR>## cmdline at 0x007FFF00 ...
0x007FFF49<BR>bd address = 0x0FBC1BB4<BR>memstart =
0x00000000<BR>memsize = 0x10000000<BR>flashstart =
0xFE000000<BR>flashsize = 0x02000000<BR>flashoffset =
0x00000000<BR>sramstart = 0x00000000<BR>sramsize =
0x00000000<BR>immr_base = 0xF0000000<BR>bootflags =
0x00000001<BR>vco
= 396 MHz<BR>sccfreq
= 99 MHz<BR>brgfreq = 24.750
MHz<BR>intfreq = 264
MHz<BR>cpmfreq = 198
MHz<BR>busfreq = 66
MHz<BR>ethaddr = 00:11:22:33:44:55<BR>IP
addr = 192.168.80.196<BR>baudrate =
115200 bps<BR>## Loading RAMDisk Image at 00b00000 ...<BR> Image
Name: uImage.ramdisk<BR> Image Type: PowerPC
Linux RAMDisk Image (gzip compressed)<BR> Data
Size: 1827099 Bytes = 1.7 MB<BR> Load
Address: 00000000<BR> Entry Point: 00000000<BR>
Verifying Checksum ... OK<BR>## initrd at 0x00B00040 ... 0x00CBE15A
(len=1827099=0x1BE11B)<BR> Loading Ramdisk to 0fa02000, end 0fbc011b
... OK<BR>## Transferring control to Linux (at address 00000000)
...<BR></FONT></DIV></DIV>
<DIV dir=ltr id=idSignature55147><PRE> </PRE></DIV></BODY></HTML>
<table><tr><td bgcolor=#ffffff><font color=#000000><br>
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. <br>
<br>
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.<br>
<br>
www.wipro.com<br>
</font></td></tr></table>