RS/6000 RS/6000 RS/6000 RS/6000 RS/6000 RS/6000 RS/6000 RS/6000 RS/6000 RS/6000 memory keyboard network scsi speaker ok 0 > boot floppy loaded at: 00600400 00734EC8 relocated to: 00800100 00934BC8 board data at: 00231370 00237D7C relocated to: 0092B02C 00931A38 zimage at: 00805B90 0092AA9D avail ram: 00400000 00800000 Linux/PPC load: console=ttyS0,9600 root=/dev/fd0 Uncompressing Linux...done. Now booting the kernel Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb Total memory = 256MB; using 512kB for hash table (at c0300000) Linux version 2.4.19 (leigh@micro.solinno.co.uk) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-81)) #3 Sun Aug 4 08:28:30 BST 2002 PReP architecture IBM planar ID: 000000d5 PReP boot cpu: 0 MPIC at 0xfddc0000 (0x3ddc0000), length 0x00040000 mapped to 0xeffc0000 On node 0 totalpages: 65536 zone(0): 65536 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,9600 root=/dev/fd0 OpenPIC Version 1.0 (4 CPUs and 16 IRQ sources) at effc0000 time_init: decrementer frequency = 16.617869 MHz Console: colour dummy device 80x25 Calibrating delay loop... 331.77 BogoMIPS Memory: 255552k available (1944k kernel code, 880k data, 160k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Bridge 00:17.0 resource 2 was deactivated by firmware Setting PCI interrupts for a "IBM 43P-140 (Tiger1)" PCI: Cannot allocate resource region 0 of PCI bridge 1 PCI: bridge 1 resource 0 moved to 7ff000..7fffff PCI: Cannot allocate resource region 0 of device 00:0b.0 PCI: Cannot allocate resource region 0 of device 00:0c.0 PCI: Cannot allocate resource region 0 of device 00:10.0 PCI: Cannot allocate resource region 0 of device 00:12.0 PCI: Cannot allocate resource region 0 of device 01:03.0 PCI: moved device 00:0b.0 resource 0 (101) to 1000 PCI: moved device 00:0c.0 resource 0 (101) to 1020 PCI: moved device 00:10.0 resource 0 (101) to 1400 PCI: moved device 00:12.0 resource 0 (101) to 1040 PCI: moved device 01:03.0 resource 0 (101) to 7ff000 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). IBM_E15: initializing IBM_E15: could not find S3 864 in system initialize_kbd: Keyboard reset failed, no ACK Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 2.88M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) pcnet32.c:v1.27a 10.02.2002 tsbogend@alpha.franken.de PCI: Enabling device 00:0c.0 (0000 -> 0003) pcnet32: PCnet/PCI II 79C970A at 0x1020, 00 06 29 ba 40 05 assigned IRQ 22. eth0: registered as PCnet/PCI II 79C970A pcnet32: 1 cards_found. SCSI subsystem driver Revision: 1.00 PCI: Enabling device 00:10.0 (0010 -> 0013) ncr53c8xx: at PCI bus 0, device 16, function 0 ncr53c8xx: setting PCI_COMMAND_MASTER...(fix-up) ncr53c8xx: 53c825a detected ncr53c825a-0: rev 0x13 on pci bus 0 device 16 function 0 irq 23 ncr53c825a-0: ID 7, Fast-10, Parity Checking scsi0 : ncr53c8xx-3.4.3b-20010512 Vendor: IBM Model: CDRM00203 !K Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 ncr53c825a-0-<4,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) Vendor: IBM Model: DCHS09U Rev: 6363 Type: Direct-Access ANSI SCSI revision: 02 ncr53c825a-0-<5,*>: FAST-10 WIDE SCSI 20.0 MB/s (100 ns, offset 8) Vendor: IBM Model: DPSS-318350N Rev: S96F Type: Direct-Access ANSI SCSI revision: 03 Attached scsi disk sda at scsi0, channel 0, id 4, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 5, lun 0 SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB) Partition check: sda: sda1 sdb: Spinning up disk..............ready SCSI device sdb: 35548320 512-byte hdwr sectors (18201 MB) sdb: sdb1 sdb2 < sdb5 > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 ncr53c825a-0-<3,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8) sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.12 Macintosh non-volatile memory driver v1.0 usb.c: registered new driver usbdevfs usb.c: registered new driver hub mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Insert root floppy and press ENTER FAT: bogus logical sector size 1981 FAT: bogus logical sector size 1981 read_super_block: can't find a reiserfs filesystem on (dev 02:00, block 64, size 1024) read_super_block: can't find a reiserfs filesystem on (dev 02:00, block 8, size 1024) Kernel panic: VFS: Unable to mount root fs on 02:00 <0>Rebooting in 180 seconds..