[RFC PATCH v4 01/11] ASoC: fsl_asrc: define functions for memory to memory usage

Hans Verkuil hverkuil at xs4all.nl
Wed Sep 20 20:31:29 AEST 2023


On 20/09/2023 11:32, Shengjiu Wang wrote:
> ASRC can be used on memory to memory case, define several
> functions for m2m usage.
> 
> m2m_start_part_one: first part of the start steps
> m2m_start_part_two: second part of the start steps
> m2m_stop_part_one: first part of stop steps
> m2m_stop_part_two: second part of stop steps, optional
> m2m_check_format: check format is supported or not
> m2m_calc_out_len: calculate output length according to input length
> m2m_get_maxburst: burst size for dma
> m2m_pair_suspend: suspend function of pair, optional.
> m2m_pair_resume: resume function of pair
> get_output_fifo_size: get remaining data size in FIFO
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> ---
>  sound/soc/fsl/fsl_asrc.c        | 150 ++++++++++++++++++++++++++++++++
>  sound/soc/fsl/fsl_asrc.h        |   2 +
>  sound/soc/fsl/fsl_asrc_common.h |  42 +++++++++
>  3 files changed, 194 insertions(+)
> 
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index b793263291dc..f9d830e0957f 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -1063,6 +1063,145 @@ static int fsl_asrc_get_fifo_addr(u8 dir, enum asrc_pair_index index)
>  	return REG_ASRDx(dir, index);
>  }
>  
> +/* Get sample numbers in FIFO */
> +static unsigned int fsl_asrc_get_output_fifo_size(struct fsl_asrc_pair *pair)
> +{
> +	struct fsl_asrc *asrc = pair->asrc;
> +	enum asrc_pair_index index = pair->index;
> +	u32 val;
> +
> +	regmap_read(asrc->regmap, REG_ASRFST(index), &val);
> +
> +	val &= ASRFSTi_OUTPUT_FIFO_MASK;
> +
> +	return val >> ASRFSTi_OUTPUT_FIFO_SHIFT;
> +}
> +
> +static int fsl_asrc_m2m_start_part_one(struct fsl_asrc_pair *pair)
> +{
> +	struct fsl_asrc_pair_priv *pair_priv = pair->private;
> +	struct fsl_asrc *asrc = pair->asrc;
> +	struct device *dev = &asrc->pdev->dev;
> +	struct asrc_config config;
> +	int ret;
> +
> +	/* fill config */
> +	config.pair = pair->index;
> +	config.channel_num = pair->channels;
> +	config.input_sample_rate = pair->rate[IN];
> +	config.output_sample_rate = pair->rate[OUT];
> +	config.input_format = pair->sample_format[IN];
> +	config.output_format = pair->sample_format[OUT];
> +	config.inclk = INCLK_NONE;
> +	config.outclk = OUTCLK_ASRCK1_CLK;
> +
> +	pair_priv->config = &config;
> +	ret = fsl_asrc_config_pair(pair, true);
> +	if (ret) {
> +		dev_err(dev, "failed to config pair: %d\n", ret);
> +		return ret;
> +	}
> +
> +	fsl_asrc_start_pair(pair);
> +
> +	return 0;
> +}
> +
> +static int fsl_asrc_m2m_start_part_two(struct fsl_asrc_pair *pair)
> +{
> +	/*
> +	 * Clear DMA request during the stall state of ASRC:
> +	 * During STALL state, the remaining in input fifo would never be
> +	 * smaller than the input threshold while the output fifo would not
> +	 * be bigger than output one. Thus the DMA request would be cleared.
> +	 */
> +	fsl_asrc_set_watermarks(pair, ASRC_FIFO_THRESHOLD_MIN,
> +				ASRC_FIFO_THRESHOLD_MAX);
> +
> +	/* Update the real input threshold to raise DMA request */
> +	fsl_asrc_set_watermarks(pair, ASRC_M2M_INPUTFIFO_WML,
> +				ASRC_M2M_OUTPUTFIFO_WML);
> +
> +	return 0;
> +}
> +
> +static int fsl_asrc_m2m_stop_part_one(struct fsl_asrc_pair *pair)
> +{
> +	fsl_asrc_stop_pair(pair);
> +
> +	return 0;
> +}
> +
> +static int fsl_asrc_m2m_check_format(u8 dir, u32 format)
> +{
> +	u64 support_format = FSL_ASRC_FORMATS;
> +
> +	if (dir == IN)
> +		support_format |= SNDRV_PCM_FMTBIT_S8;
> +
> +	if (!(1 << format & support_format))
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static int fsl_asrc_m2m_check_rate(u8 dir, u32 rate)
> +{
> +	if (rate < 5512 || rate > 192000)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static int fsl_asrc_m2m_check_channel(u8 dir, u32 channels)
> +{
> +	if (channels < 1 || channels > 10)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +/* calculate capture data length according to output data length and sample rate */
> +static int fsl_asrc_m2m_calc_out_len(struct fsl_asrc_pair *pair, int input_buffer_length)
> +{
> +	unsigned int in_width, out_width;
> +	unsigned int channels = pair->channels;
> +	unsigned int in_samples, out_samples;
> +	unsigned int out_length;
> +
> +	in_width = snd_pcm_format_physical_width(pair->sample_format[IN]) / 8;
> +	out_width = snd_pcm_format_physical_width(pair->sample_format[OUT]) / 8;
> +
> +	in_samples = input_buffer_length / in_width / channels;
> +	out_samples = pair->rate[OUT] * in_samples / pair->rate[IN];
> +	out_length = (out_samples - ASRC_OUTPUT_LAST_SAMPLE) * out_width * channels;
> +
> +	return out_length;
> +}
> +
> +static int fsl_asrc_m2m_get_maxburst(u8 dir, struct fsl_asrc_pair *pair)
> +{
> +	struct fsl_asrc *asrc = pair->asrc;
> +	struct fsl_asrc_priv *asrc_priv = asrc->private;
> +	int wml = (dir == IN) ? ASRC_M2M_INPUTFIFO_WML : ASRC_M2M_OUTPUTFIFO_WML;
> +
> +	if (!asrc_priv->soc->use_edma)
> +		return wml * pair->channels;
> +	else
> +		return 1;
> +}
> +
> +static int fsl_asrc_m2m_pair_resume(struct fsl_asrc_pair *pair)
> +{
> +	struct fsl_asrc *asrc = pair->asrc;
> +	int i;
> +
> +	for (i = 0; i < pair->channels * 4; i++)
> +		regmap_write(asrc->regmap, REG_ASRDI(pair->index), 0);
> +
> +	return 0;
> +}
> +
>  static int fsl_asrc_runtime_resume(struct device *dev);
>  static int fsl_asrc_runtime_suspend(struct device *dev);
>  
> @@ -1147,6 +1286,17 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  	asrc->get_fifo_addr = fsl_asrc_get_fifo_addr;
>  	asrc->pair_priv_size = sizeof(struct fsl_asrc_pair_priv);
>  
> +	asrc->m2m_start_part_one = fsl_asrc_m2m_start_part_one;
> +	asrc->m2m_start_part_two = fsl_asrc_m2m_start_part_two;
> +	asrc->m2m_stop_part_one = fsl_asrc_m2m_stop_part_one;
> +	asrc->get_output_fifo_size = fsl_asrc_get_output_fifo_size;
> +	asrc->m2m_check_format = fsl_asrc_m2m_check_format;
> +	asrc->m2m_check_rate = fsl_asrc_m2m_check_rate;
> +	asrc->m2m_check_channel = fsl_asrc_m2m_check_channel;
> +	asrc->m2m_calc_out_len = fsl_asrc_m2m_calc_out_len;
> +	asrc->m2m_get_maxburst = fsl_asrc_m2m_get_maxburst;
> +	asrc->m2m_pair_resume = fsl_asrc_m2m_pair_resume;
> +
>  	if (of_device_is_compatible(np, "fsl,imx35-asrc")) {
>  		asrc_priv->clk_map[IN] = input_clk_map_imx35;
>  		asrc_priv->clk_map[OUT] = output_clk_map_imx35;
> diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
> index 86d2422ad606..1c492eb237f5 100644
> --- a/sound/soc/fsl/fsl_asrc.h
> +++ b/sound/soc/fsl/fsl_asrc.h
> @@ -12,6 +12,8 @@
>  
>  #include  "fsl_asrc_common.h"
>  
> +#define ASRC_M2M_INPUTFIFO_WML		0x4
> +#define ASRC_M2M_OUTPUTFIFO_WML		0x2
>  #define ASRC_DMA_BUFFER_NUM		2
>  #define ASRC_INPUTFIFO_THRESHOLD	32
>  #define ASRC_OUTPUTFIFO_THRESHOLD	32
> diff --git a/sound/soc/fsl/fsl_asrc_common.h b/sound/soc/fsl/fsl_asrc_common.h
> index 7e1c13ca37f1..7f7e725075fe 100644
> --- a/sound/soc/fsl/fsl_asrc_common.h
> +++ b/sound/soc/fsl/fsl_asrc_common.h
> @@ -34,6 +34,11 @@ enum asrc_pair_index {
>   * @pos: hardware pointer position
>   * @req_dma_chan: flag to release dev_to_dev chan
>   * @private: pair private area
> + * @complete: dma task complete
> + * @sample_format: format of m2m
> + * @rate: rate of m2m
> + * @buf_len: buffer length of m2m
> + * @req_pair: flag for request pair
>   */
>  struct fsl_asrc_pair {
>  	struct fsl_asrc *asrc;
> @@ -49,6 +54,13 @@ struct fsl_asrc_pair {
>  	bool req_dma_chan;
>  
>  	void *private;
> +
> +	/* used for m2m */
> +	struct completion complete[2];
> +	snd_pcm_format_t sample_format[2];
> +	unsigned int rate[2];
> +	unsigned int buf_len[2];
> +	bool req_pair;
>  };
>  
>  /**
> @@ -72,6 +84,19 @@ struct fsl_asrc_pair {
>   * @request_pair: function pointer
>   * @release_pair: function pointer
>   * @get_fifo_addr: function pointer
> + * @m2m_start_part_one: function pointer
> + * @m2m_start_part_two: function pointer
> + * @m2m_stop_part_one: function pointer
> + * @m2m_stop_part_two: function pointer
> + * @m2m_check_format: function pointer
> + * @m2m_check_rate: function pointer
> + * @m2m_check_channel: function pointer
> + * @m2m_calc_out_len: function pointer
> + * @m2m_get_maxburst: function pointer
> + * @m2m_pair_suspend: function pointer
> + * @m2m_pair_resume: function pointer
> + * @m2m_set_ratio_mod: function pointer
> + * @get_output_fifo_size: function pointer
>   * @pair_priv_size: size of pair private struct.
>   * @private: private data structure
>   */
> @@ -97,6 +122,23 @@ struct fsl_asrc {
>  	int (*request_pair)(int channels, struct fsl_asrc_pair *pair);
>  	void (*release_pair)(struct fsl_asrc_pair *pair);
>  	int (*get_fifo_addr)(u8 dir, enum asrc_pair_index index);
> +
> +	int (*m2m_start_part_one)(struct fsl_asrc_pair *pair);
> +	int (*m2m_start_part_two)(struct fsl_asrc_pair *pair);
> +	int (*m2m_stop_part_one)(struct fsl_asrc_pair *pair);
> +	int (*m2m_stop_part_two)(struct fsl_asrc_pair *pair);
> +
> +	int (*m2m_check_format)(u8 dir, u32 format);

I think it will be easier if this just returns the u64 with the supported formats
for the given direction. That will be helpful for enum_fmt.

> +	int (*m2m_check_rate)(u8 dir, u32 rate);

This should just map the rate to something that is valid. V4L2 allows drivers
to modify the requested format to whatever is valid, and that can be used here.

> +	int (*m2m_check_channel)(u8 dir, u32 channels);

This can do the same (i.e., map to a valid number of channels).

Regards,

	Hans

> +
> +	int (*m2m_calc_out_len)(struct fsl_asrc_pair *pair, int input_buffer_length);
> +	int (*m2m_get_maxburst)(u8 dir, struct fsl_asrc_pair *pair);
> +	int (*m2m_pair_suspend)(struct fsl_asrc_pair *pair);
> +	int (*m2m_pair_resume)(struct fsl_asrc_pair *pair);
> +	int (*m2m_set_ratio_mod)(struct fsl_asrc_pair *pair, int val);
> +
> +	unsigned int (*get_output_fifo_size)(struct fsl_asrc_pair *pair);
>  	size_t pair_priv_size;
>  
>  	void *private;



More information about the Linuxppc-dev mailing list