[PATCH] ASoC: imx-rpmsg: Set ignore_pmdown_time for dai_link

Shengjiu Wang shengjiu.wang at gmail.com
Wed Sep 13 11:58:37 AEST 2023


On Tue, Sep 12, 2023 at 2:34 PM Chancel Liu <chancel.liu at nxp.com> wrote:
>
> i.MX rpmsg sound cards work on codec slave mode. MCLK will be disabled
> by CPU DAI driver in hw_free(). Some codec requires MCLK present at
> power up/down sequence. So need to set ignore_pmdown_time to power down
> codec immediately before MCLK is turned off.
>
> Take WM8962 as an example, if MCLK is disabled before DAPM power down
> playback stream, FIFO error will arise in WM8962 which will have bad
> impact on playback next.
>
> Signed-off-by: Chancel Liu <chancel.liu at nxp.com>
> ---
>  sound/soc/fsl/imx-rpmsg.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/sound/soc/fsl/imx-rpmsg.c b/sound/soc/fsl/imx-rpmsg.c
> index 3c7b95db2eac..d2ecd5e821b1 100644
> --- a/sound/soc/fsl/imx-rpmsg.c
> +++ b/sound/soc/fsl/imx-rpmsg.c
> @@ -89,6 +89,13 @@ static int imx_rpmsg_probe(struct platform_device *pdev)
>                             SND_SOC_DAIFMT_NB_NF |
>                             SND_SOC_DAIFMT_CBC_CFC;
>
> +       /* i.MX rpmsg sound cards work on codec slave mode. MCLK will be

Comments for multi line start from empty line with "/* "

Best regards
wang Shengjiu
> +        * disabled by CPU DAI driver in hw_free(). Some codec requires MCLK
> +        * present at power up/down sequence. So need to set ignore_pmdown_time
> +        * to power down codec immediately before MCLK is turned off.
> +        */
> +       data->dai.ignore_pmdown_time = 1;
> +
>         /* Optional codec node */
>         ret = of_parse_phandle_with_fixed_args(np, "audio-codec", 0, 0, &args);
>         if (ret) {
> --
> 2.25.1
>


More information about the Linuxppc-dev mailing list