PCI DMA to user mem on mpc83xx

[Andre Schwarz]

David,

>> we have a pretty old PCI device driver here that needs some
>> basic rework running on 2.6.27 on several MPC83xx.
>> It's a simple char-device with "give me some data" implemented
>> using read() resulting in zero-copy DMA to user mem.
>>
>> There's get_user_pages() working under the hood along with
>> SetPageDirty() and page_cache_release().
> Does that dma use the userspace virtual address, or the
> physical address - or are you remapping the user memory into
> kernel address space.

no mapping at all AFAIK.

I'm using get_user_pages() followed by allocation of a struct 
scatterlist being filled with sg_set_page().
After the transfer the pages are marked dirty using SetPageDirty().

> If the memory is remapped into the kernel address space, the
> cost of the mmu and tlb operations (especially on MP systems)
> is such that a dma to kernel memory followed by copyout/copytouser
> may well be faster!
no mapping.

> That may even be the case even if the dma is writing to the
> user virtual (or physical) addresses when it is only
> necessary to ensure the memory page is resident and that
> the caches are coherent.
All I need is physical addresses of user mem.
Since the allocating user driver is using mlock() and there's no swap I 
expect to be safe ... is this a stupid assumption ?
> In any case the second copy is probably far faster than the
> PCI one!
huh - I observed memcpy() to be very expensive (at least on 83xx PowerPC).
> I've recently written driver that supports a pread/pwrite interface
> to the memory windows on a PCIe card. It was important to use
> dma for the PCIe transfers (to get a sensible transfer size).
> I overlapped the copyin/copyout with the next dma transfer.
> The dma's are fast enough that it is worth spinning waiting
> for completion - but slow enough to make the overlapped
> operation worthwhile (same speed as a single word pio transfer).


Thanks for your feedback.


Cheers,
André


MATRIX VISION GmbH, Talstrasse 16, DE-71570 Oppenweiler
Registergericht: Amtsgericht Stuttgart, HRB 271090
Geschaeftsfuehrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner