[PATCH 8/8] 44x/currituck: Add support for the new IBM currituck platform
Tony Breeds
tony at bakeyournoodle.com
Thu Dec 1 18:39:24 EST 2011
Based on original work by David 'Shaggy' Kliekamp.
Signed-off-by: Tony Breeds <tony at bakeyournoodle.com>
---
arch/powerpc/boot/Makefile | 5 +-
arch/powerpc/boot/dts/currituck.dts | 237 ++++++++++++++++++++++++++
arch/powerpc/boot/treeboot-currituck.c | 119 +++++++++++++
arch/powerpc/boot/wrapper | 3 +
arch/powerpc/configs/44x/currituck_defconfig | 110 ++++++++++++
arch/powerpc/platforms/44x/Kconfig | 10 +
arch/powerpc/platforms/44x/Makefile | 1 +
arch/powerpc/platforms/44x/currituck.c | 204 ++++++++++++++++++++++
8 files changed, 688 insertions(+), 1 deletions(-)
create mode 100644 arch/powerpc/boot/dts/currituck.dts
create mode 100644 arch/powerpc/boot/treeboot-currituck.c
create mode 100644 arch/powerpc/configs/44x/currituck_defconfig
create mode 100644 arch/powerpc/platforms/44x/currituck.c
Much of the currituck.c code could go into ppc44x_simple.c but that makes
finding a home for the quirk code harder. We can always move it there later.
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 72ee8c1..ff0057f 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
@@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
- gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
+ gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
+ treeboot-currituck.c
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -212,6 +214,7 @@ image-$(CONFIG_WARP) += cuImage.warp
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
treeImage.iss4xx-mpic
+image-$(CONFIG_CURRITUCK) += treeImage.currituck
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts
new file mode 100644
index 0000000..b801dd0
--- /dev/null
+++ b/arch/powerpc/boot/dts/currituck.dts
@@ -0,0 +1,237 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000; // spin table
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "ibm,currituck";
+ compatible = "ibm,currituck";
+ dcr-parent = <&{/cpus/cpu at 0}>;
+
+ aliases {
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <0>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "ok";
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ model = "PowerPC,476";
+ reg = <1>;
+ clock-frequency = <1600000000>; // 1.6 GHz
+ timebase-frequency = <100000000>; // 100Mhz
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ status = "disabled";
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x01f00000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+ };
+
+ MPIC: interrupt-controller {
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ dcr-reg = <0xffc00000 0x00040000>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+
+ };
+
+ plb {
+ compatible = "ibm,plb6";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ clock-frequency = <200000000>; // 200Mhz
+
+ POB0: opb {
+ compatible = "ibm,opb-4xx", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Wish there was a nicer way of specifying a full
+ * 32-bit range
+ */
+ ranges = <0x00000000 0x00000200 0x00000000 0x80000000
+ 0x80000000 0x00000200 0x80000000 0x80000000>;
+ clock-frequency = <100000000>;
+
+ UART0: serial at 10000000 {
+ device_type = "serial";
+ compatible = "ns16750", "ns16550";
+ reg = <0x10000000 0x00000008>;
+ virtual-reg = <0xe1000000>;
+ clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
+ current-speed = <115200>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <34 2>;
+ };
+
+ IIC0: i2c at 00000000 {
+ compatible = "ibm,iic-currituck", "ibm,iic";
+ reg = <0x0 0x00000014>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <79 2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc at 68 {
+ compatible = "stm,m41t80", "m41st85";
+ reg = <0x68>;
+ };
+ };
+ };
+
+ PCIE0: pciex at 10100000000 { // 4xGBIF1
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x80 0x20>;
+
+// pci_space < pci_addr > < cpu_addr > < size >
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
+ };
+
+ PCIE1: pciex at 30100000000 { // 4xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0x60 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
+ };
+
+ PCIE2: pciex at 38100000000 { // 2xGBIF0
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+ primary;
+ port = <0x2>; /* port number */
+ reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
+ 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
+ dcr-reg = <0xA0 0x20>;
+
+ ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
+ 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
+
+ /* Inbound starting at 0 to memsize filled in by zImage */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
+
+ /* This drives busses 0 to 0xf */
+ bus-range = <0x0 0xf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
+ 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
+ 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
+ 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
+ };
+
+ };
+
+ chosen {
+ linux,stdout-path = &UART0;
+ };
+};
diff --git a/arch/powerpc/boot/treeboot-currituck.c b/arch/powerpc/boot/treeboot-currituck.c
new file mode 100644
index 0000000..925ae43
--- /dev/null
+++ b/arch/powerpc/boot/treeboot-currituck.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ * Copyright (C) Paul Mackerras 1997.
+ *
+ * Matt Porter <mporter at kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin at zultys.com> or <ebs at ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * Copyright 2007 David Gibson, IBM Corporation.
+ * Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ * Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define MAX_RANKS 0x4
+#define DDR3_MR0CF 0x80010011U
+
+static unsigned long long ibm_currituck_memsize;
+static unsigned long long ibm_currituck_detect_memsize(void)
+{
+ u32 reg;
+ unsigned i;
+ unsigned long long memsize = 0;
+
+ for(i = 0; i < MAX_RANKS; i++){
+ reg = mfdcrx(DDR3_MR0CF + i);
+
+ if (!(reg & 1))
+ continue;
+
+ reg &= 0x0000f000;
+ reg >>= 12;
+ memsize += (0x800000ULL << reg);
+ }
+
+ return memsize;
+}
+
+static void ibm_currituck_fixups(void)
+{
+ void *devp = finddevice("/");
+ u32 dma_ranges[7];
+
+ dt_fixup_memory(0x0ULL, ibm_currituck_memsize);
+
+ while ((devp = find_node_by_devtype(devp, "pci"))) {
+ if (getprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges)) < 0) {
+ printf("%s: Failed to get dma-ranges\r\n", __func__);
+ continue;
+ }
+
+ dma_ranges[5] = ibm_currituck_memsize >> 32;
+ dma_ranges[6] = ibm_currituck_memsize & 0xffffffffUL;
+
+ setprop(devp, "dma-ranges", dma_ranges, sizeof(dma_ranges));
+ }
+}
+
+#define SPRN_PIR 0x11E /* Processor Indentification Register */
+void platform_init(void)
+{
+ unsigned long end_of_ram, avail_ram;
+ u32 pir_reg;
+ int node, size;
+ const u32 *timebase;
+
+ ibm_currituck_memsize = ibm_currituck_detect_memsize();
+ if (ibm_currituck_memsize >> 32)
+ end_of_ram = ~0UL;
+ else
+ end_of_ram = ibm_currituck_memsize;
+ avail_ram = end_of_ram - (unsigned long)_end;
+
+ simple_alloc_init(_end, avail_ram, 128, 64);
+ platform_ops.fixups = ibm_currituck_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ pir_reg = mfspr(SPRN_PIR);
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+ fdt_init(_dtb_start);
+
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index c74531a..87f4950 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -244,6 +244,9 @@ gamecube|wii)
link_address='0x600000'
platformo="$object/$platform-head.o $object/$platform.o"
;;
+treeboot-currituck)
+ link_address='0x1000000'
+ ;;
treeboot-iss4xx-mpic)
platformo="$object/treeboot-iss4xx.o"
;;
diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig
new file mode 100644
index 0000000..4192322
--- /dev/null
+++ b/arch/powerpc/configs/44x/currituck_defconfig
@@ -0,0 +1,110 @@
+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_CURRITUCK=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_MATH_EMULATION=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_SATA_PMP is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_ATA_SFF is not set
+CONFIG_NETDEVICES=y
+CONFIG_E1000E=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NLS_DEFAULT="n"
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x10000000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x200
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index f0be6e0..5d5aaf6 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -186,6 +186,16 @@ config ISS4xx
help
This option enables support for the IBM ISS simulation environment
+config CURRITUCK
+ bool "IBM Currituck (476fpe) Support"
+ depends on PPC_47x
+ default n
+ select SWIOTLB
+ select 476FPE
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the IBM Currituck (476fpe) evaluation board
+
config ICON
bool "Icon"
depends on 44x
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 553db60..d03833a 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
obj-$(CONFIG_ISS4xx) += iss4xx.o
obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
+obj-$(CONFIG_CURRITUCK) += currituck.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c
new file mode 100644
index 0000000..1fdf569
--- /dev/null
+++ b/arch/powerpc/platforms/44x/currituck.c
@@ -0,0 +1,204 @@
+/*
+ * Currituck board specific routines
+ *
+ * Copyright © 2011 Tony Breeds IBM Corporation
+ *
+ * Based on earlier code:
+ * Matt Porter <mporter at kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin at zultys.com> or <ebs at ebshome.net>
+ * Copyright (c) 2003-2005 Zultys Technologies
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Copyright 2007 David Gibson <dwg at au1.ibm.com>, IBM Corporation.
+ * Copyright © 2011 David Kliekamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/ppc4xx.h>
+#include <asm/mpic.h>
+#include <asm/mmu.h>
+
+#include <linux/pci.h>
+
+static __initdata struct of_device_id ppc47x_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,plb6", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+/* The EEPROM is missing and the default values are bogus. This forces USB in
+ * to EHCI mode */
+static void __devinit quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
+{
+ if (of_machine_is_compatible("ibm,currituck")) {
+ pci_write_config_dword(dev, 0xe0, 0x0114231f);
+ pci_write_config_dword(dev, 0xe4, 0x00006c40);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
+
+static int __init ppc47x_device_probe(void)
+{
+ of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(ppc47x, ppc47x_device_probe);
+
+/* We can have either UICs or MPICs */
+static void __init ppc47x_init_irq(void)
+{
+ struct device_node *np;
+
+ /* Find top level interrupt controller */
+ for_each_node_with_property(np, "interrupt-controller") {
+ if (of_get_property(np, "interrupts", NULL) == NULL)
+ break;
+ }
+ if (np == NULL)
+ panic("Can't find top level interrupt controller");
+
+ /* Check type and do appropriate initialization */
+ if (of_device_is_compatible(np, "chrp,open-pic")) {
+ /* The MPIC driver will get everything it needs from the
+ * device-tree, just pass 0 to all arguments
+ */
+ struct mpic *mpic =
+ mpic_alloc(np, 0, MPIC_PRIMARY, 0, 0, " MPIC ");
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ } else
+ panic("Unrecognized top level interrupt controller");
+}
+
+#ifdef CONFIG_SMP
+static void __cpuinit smp_ppc47x_setup_cpu(int cpu)
+{
+ mpic_setup_this_cpu();
+}
+
+static int __cpuinit smp_ppc47x_kick_cpu(int cpu)
+{
+ struct device_node *cpunode = of_get_cpu_node(cpu, NULL);
+ const u64 *spin_table_addr_prop;
+ u32 *spin_table;
+ extern void start_secondary_47x(void);
+
+ BUG_ON(cpunode == NULL);
+
+ /* Assume spin table. We could test for the enable-method in
+ * the device-tree but currently there's little point as it's
+ * our only supported method
+ */
+ spin_table_addr_prop =
+ of_get_property(cpunode, "cpu-release-addr", NULL);
+
+ if (spin_table_addr_prop == NULL) {
+ pr_err("CPU%d: Can't start, missing cpu-release-addr !\n",
+ cpu);
+ return 1;
+ }
+
+ /* Assume it's mapped as part of the linear mapping. This is a bit
+ * fishy but will work fine for now
+ *
+ * XXX: Is there any reason to assume differently?
+ */
+ spin_table = (u32 *)__va(*spin_table_addr_prop);
+ pr_debug("CPU%d: Spin table mapped at %p\n", cpu, spin_table);
+
+ spin_table[3] = cpu;
+ smp_wmb();
+ spin_table[1] = __pa(start_secondary_47x);
+ mb();
+
+ return 0;
+}
+
+static struct smp_ops_t ppc47x_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .setup_cpu = smp_ppc47x_setup_cpu,
+ .kick_cpu = smp_ppc47x_kick_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+
+static void __init ppc47x_smp_init(void)
+{
+ if (mmu_has_feature(MMU_FTR_TYPE_47x))
+ smp_ops = &ppc47x_smp_ops;
+}
+
+#else /* CONFIG_SMP */
+static void __init ppc47x_smp_init(void) { }
+#endif /* CONFIG_SMP */
+
+static void __init ppc47x_setup_arch(void)
+{
+
+ /* No need to check the DMA config as we /know/ our windows are all of
+ * RAM. Lets hope that doesn't change */
+#ifdef CONFIG_SWIOTLB
+ if (memblock_end_of_DRAM() > 0xffffffff) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+ ppc47x_smp_init();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
+ return 0;
+
+ return 1;
+}
+
+/* Use USB controller should have been hardware swizzled but it wasn't :( */
+static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
+{
+ if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
+ dev->device == 0x00e0)) {
+ dev->irq = irq_create_mapping(NULL, 47);
+ pr_info("%s: Mapping irq 47 %d\n", __func__, dev->irq);
+ }
+}
+
+define_machine(ppc47x) {
+ .name = "PowerPC 47x",
+ .probe = ppc47x_probe,
+ .progress = udbg_progress,
+ .init_IRQ = ppc47x_init_irq,
+ .setup_arch = ppc47x_setup_arch,
+ .pci_irq_fixup = ppc47x_pci_irq_fixup,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
--
1.7.6.4
More information about the Linuxppc-dev
mailing list