[PATCH] pmac_zilog: Workaround problem due to interrupt on closed port

Benjamin Herrenschmidt benh at kernel.crashing.org
Mon Jan 11 14:51:42 EST 2010


It seems that in qemu, we can see an interrupt in R3 despite the
fact that it's masked in W1. The chip doesn't actually issue an
interrupt, but we can "see" it when taking an interrupt for the
other channel. This may be a qemu bug ... or not, so let's be
safe and avoid calling into the UART layer when that happens which
woulc cause a crash.

Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---

David: This would affect sunzilog as well I believe. I'm not sure
if it's a bug in qemu emulation of the ESCC or if a real ESCC can
show it so I decided to be safe :-) The ESCC doc I have doesn't
appear to specify whether the interrupt status bits in R3 are
prior or post masking by W1. I can reproduce that by having the
kernel low level "udbg" debug console on channel B and the main
console on channel A (which is itself an uncommon setup).

diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0700cd1..683e66f 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
 		goto ack_tx_int;
 	}
 
+	/* Under some circumstances, we see interrupts reported for
+	 * a closed channel. The interrupt mask in R1 is clear, but
+	 * R3 still signals the interrupts and we see them when taking
+	 * an interrupt for the other channel (this could be a qemu
+	 * bug but since the ESCC doc doesn't specify precsiely whether
+	 * R3 interrup status bits are masked by R1 interrupt enable
+	 * bits, better safe than sorry). --BenH.
+	 */
+	if (!ZS_IS_OPEN(uap))
+		goto ack_tx_int;
+
 	if (uap->port.x_char) {
 		uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
 		write_zsdata(uap, uap->port.x_char);
-- 
1.6.3.3





More information about the Linuxppc-dev mailing list