[PATCH] net: xilinx_emaclite: Fix problem with first incoming packet

John Linn john.linn at xilinx.com
Wed Sep 23 01:24:14 EST 2009


From: Michal Simek <monstr at monstr.eu>

You can't ping the board or connect to it unless you send
any packet out from board.

Tested-by: John Williams <john.williams at petalogix.com>
Signed-off-by: Michal Simek <monstr at monstr.eu>
Acked-by: John Linn <john.linn at xilinx.com>
---
 drivers/net/xilinx_emaclite.c |    7 ++-----
 1 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index dc22782..83a044d 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -134,18 +134,15 @@ static void xemaclite_enable_interrupts(struct net_local *drvdata)
 	}
 
 	/* Enable the Rx interrupts for the first buffer */
-	reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
 	out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
-		 reg_data | XEL_RSR_RECV_IE_MASK);
+		 XEL_RSR_RECV_IE_MASK);
 
 	/* Enable the Rx interrupts for the second Buffer if
 	 * configured in HW */
 	if (drvdata->rx_ping_pong != 0) {
-		reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
-				   XEL_RSR_OFFSET);
 		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
 			 XEL_RSR_OFFSET,
-			 reg_data | XEL_RSR_RECV_IE_MASK);
+			 XEL_RSR_RECV_IE_MASK);
 	}
 
 	/* Enable the Global Interrupt Enable */
-- 
1.6.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.




More information about the Linuxppc-dev mailing list