[PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()

Andy Shevchenko andriy.shevchenko at linux.intel.com
Fri Feb 23 03:47:18 AEDT 2024


On Thu, Feb 22, 2024 at 06:43:08PM +0200, Andy Shevchenko wrote:
> On Thu, Feb 22, 2024 at 03:23:24PM +0200, Andy Shevchenko wrote:
> > On Thu, Feb 22, 2024 at 11:07:05AM +1030, Andrew Jeffery wrote:
> > > On Wed, 2024-02-21 at 20:31 +0200, Andy Shevchenko wrote:
> > > > Since we have now a common helper to read port properties
> > > > use it instead of sparse home grown solution.
> > > 
> > > I did some brief testing of the series for the Aspeed machines under
> > > qemu, building them on top of v6.8-rc5:
> > > 
> > > export ARCH=arm
> > > export CROSS_COMPILE=arm-linux-gnueabihf-
> > > make aspeed_g5_defconfig
> > > make -j$(nproc)
> > > qemu-system-arm -M rainier-bmc -nographic -no-reboot -kernel arch/arm/boot/zImage -dtb arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb -initrd ...
> > > 
> > > I got an oops during boot, which bisected to this change:
> > 
> > Thank you for prompt testing! I will look at it.
> 
> I found the issue, will be fixed in next version.

Whoever is going to test this series, the

-		port->iotype = use_defaults ? UPIO_MEM : port->iotype;
+		port->iotype = UPIO_MEM;

should be applied to uart_read_port_properties() implementation.

-- 
With Best Regards,
Andy Shevchenko




More information about the Linux-aspeed mailing list