[PATCH v2 2/2] ARM: dts: aspeed: Add ASRock SPC621D8HM3 BMC

Joel Stanley joel at jms.id.au
Tue Apr 30 11:23:27 AEST 2024


Hi Zev,

On Mon, 20 Nov 2023 at 22:50, Zev Weiss <zev at bewilderbeest.net> wrote:
>
> This is a Xeon board broadly similar (aside from CPU vendor) to the
> already-support romed8hm3 (half-width, single-socket, ast2500).  It
> doesn't require anything terribly special for OpenBMC support, so this
> device-tree should provide everything necessary for basic
> functionality with it.

We've had these in the aspeed tree for a while, but as I was on leave
there was no pull request. I'm just putting one together now and
noticed some unusual looking device tree compatibles:

WARNING: DT compatible string "renesas,isl69269" appears un-documented
-- check ./Documentation/devicetree/bindings/
#220: FILE: arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts:181:
+        compatible = "renesas,isl69269", "isl69269";

WARNING: DT compatible string "isl69269" appears un-documented --
check ./Documentation/devicetree/bindings/
#220: FILE: arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts:181:
+        compatible = "renesas,isl69269", "isl69269";

WARNING: DT compatible string "st,24c128" appears un-documented --
check ./Documentation/devicetree/bindings/
#230: FILE: arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts:191:
+        compatible = "st,24c128", "atmel,24c128";


Can you update the patch to be checkpatch clean when applied to v6.9?

Cheers,

Joel
>
> Signed-off-by: Zev Weiss <zev at bewilderbeest.net>
> ---
>  arch/arm/boot/dts/aspeed/Makefile             |   1 +
>  .../aspeed/aspeed-bmc-asrock-spc621d8hm3.dts  | 324 ++++++++++++++++++
>  2 files changed, 325 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
>
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index d3ac20e316d0..2df0a2e88df7 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>         aspeed-bmc-arm-stardragon4800-rep2.dtb \
>         aspeed-bmc-asrock-e3c246d4i.dtb \
>         aspeed-bmc-asrock-romed8hm3.dtb \
> +       aspeed-bmc-asrock-spc621d8hm3.dtb \
>         aspeed-bmc-bytedance-g220a.dtb \
>         aspeed-bmc-delta-ahe50dc.dtb \
>         aspeed-bmc-facebook-bletchley.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
> new file mode 100644
> index 000000000000..555485871e7a
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
> @@ -0,0 +1,324 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/{
> +       model = "ASRock SPC621D8HM3 BMC";
> +       compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
> +
> +       aliases {
> +               serial4 = &uart5;
> +
> +               i2c20 = &i2c1mux0ch0;
> +               i2c21 = &i2c1mux0ch1;
> +       };
> +
> +       chosen {
> +               stdout-path = &uart5;
> +       };
> +
> +       memory at 80000000 {
> +               reg = <0x80000000 0x20000000>;
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               /* BMC heartbeat */
> +               led-0 {
> +                       gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> +                       function = LED_FUNCTION_HEARTBEAT;
> +                       color = <LED_COLOR_ID_GREEN>;
> +                       linux,default-trigger = "timer";
> +               };
> +
> +               /* system fault */
> +               led-1 {
> +                       gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
> +                       function = LED_FUNCTION_FAULT;
> +                       color = <LED_COLOR_ID_RED>;
> +                       panic-indicator;
> +               };
> +       };
> +
> +       iio-hwmon {
> +               compatible = "iio-hwmon";
> +               io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
> +                       <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
> +                       <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
> +                       <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
> +       };
> +};
> +
> +&fmc {
> +       status = "okay";
> +       flash at 0 {
> +               status = "okay";
> +               m25p,fast-read;
> +               label = "bmc";
> +               spi-max-frequency = <50000000>; /* 50 MHz */
> +#include "openbmc-flash-layout-64.dtsi"
> +       };
> +};
> +
> +&uart5 {
> +       status = "okay";
> +};
> +
> +&vuart {
> +       status = "okay";
> +       aspeed,lpc-io-reg = <0x2f8>;
> +       aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> +};
> +
> +&mac0 {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
> +
> +       nvmem-cells = <&eth0_macaddress>;
> +       nvmem-cell-names = "mac-address";
> +};
> +
> +&i2c0 {
> +       status = "okay";
> +};
> +
> +&i2c1 {
> +       status = "okay";
> +
> +       /* hardware monitor/thermal sensor */
> +       temperature-sensor at 29 {
> +               compatible = "nuvoton,nct7802";
> +               reg = <0x29>;
> +       };
> +
> +       /* motherboard temp sensor (TMP1, near BMC) */
> +       temperature-sensor at 4c {
> +               compatible = "nuvoton,w83773g";
> +               reg = <0x4c>;
> +       };
> +
> +       /* motherboard FRU eeprom */
> +       eeprom at 50 {
> +               compatible = "st,24c128", "atmel,24c128";
> +               reg = <0x50>;
> +               pagesize = <16>;
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +
> +               eth0_macaddress: macaddress at 3f80 {
> +                       reg = <0x3f80 6>;
> +               };
> +       };
> +
> +       /* M.2 slot smbus mux */
> +       i2c-mux at 71 {
> +               compatible = "nxp,pca9545";
> +               reg = <0x71>;
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               i2c1mux0ch0: i2c at 0 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0>;
> +               };
> +
> +               i2c1mux0ch1: i2c at 1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <1>;
> +               };
> +       };
> +};
> +
> +&i2c2 {
> +       status = "okay";
> +};
> +
> +&i2c3 {
> +       status = "okay";
> +};
> +
> +&i2c4 {
> +       status = "okay";
> +};
> +
> +&i2c5 {
> +       status = "okay";
> +};
> +
> +&i2c6 {
> +       status = "okay";
> +};
> +
> +&i2c7 {
> +       status = "okay";
> +};
> +
> +&i2c8 {
> +       status = "okay";
> +};
> +
> +&i2c9 {
> +       status = "okay";
> +};
> +
> +&i2c10 {
> +       status = "okay";
> +};
> +
> +&i2c11 {
> +       status = "okay";
> +};
> +
> +&i2c12 {
> +       status = "okay";
> +};
> +
> +&i2c13 {
> +       status = "okay";
> +};
> +
> +&video {
> +       status = "okay";
> +};
> +
> +&vhub {
> +       status = "okay";
> +};
> +
> +&lpc_ctrl {
> +       status = "okay";
> +};
> +
> +&lpc_snoop {
> +       status = "okay";
> +       snoop-ports = <0x80>;
> +};
> +
> +&kcs3 {
> +       status = "okay";
> +       aspeed,lpc-io-reg = <0xca2>;
> +};
> +
> +&peci0 {
> +       status = "okay";
> +};
> +
> +&pwm_tacho {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_pwm0_default
> +               &pinctrl_pwm2_default
> +               &pinctrl_pwm3_default
> +               &pinctrl_pwm4_default>;
> +
> +       fan at 0 {
> +               reg = <0x00>;
> +               aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> +       };
> +
> +       fan at 2 {
> +               reg = <0x02>;
> +               aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> +       };
> +
> +       fan at 3 {
> +               reg = <0x03>;
> +               aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> +       };
> +
> +       fan at 4 {
> +               reg = <0x04>;
> +               aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> +       };
> +};
> +
> +&gpio {
> +       status = "okay";
> +       gpio-line-names =
> +               /*  A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
> +                       "BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
> +                       "", "", "", "",
> +               /*  B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
> +                       "", "", "", "GPIO_RST",
> +               /*  C */ "", "", "", "", "", "", "", "",
> +               /*  D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
> +                       "FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
> +                       "NMI_BTN_N", "BMC_NMI",
> +                       "", "",
> +               /*  E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
> +               /*  F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
> +                       "FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
> +                       "FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
> +                       "FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
> +               /*  G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
> +                       "BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
> +               /*  H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
> +                       "FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
> +               /*  I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
> +                       "IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
> +                       "", "", "", "",
> +               /*  J */ "", "", "", "", "", "", "", "",
> +               /*  K */ "", "", "", "", "", "", "", "",
> +               /*  L */ "", "", "", "", "", "", "", "",
> +               /*  M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
> +                       "IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
> +                       "FM_CPU1_PROCHOT_BMC_LVC3_N", "",
> +                       "FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
> +               /*  N */ "", "", "", "", "", "", "", "",
> +               /*  O */ "", "", "", "", "", "", "", "",
> +               /*  P */ "", "", "", "", "", "", "", "",
> +               /*  Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
> +               /*  R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
> +                       "", "FM_BMC_PCH_SCI_LPC_N", "", "",
> +               /*  S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
> +                       "FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
> +                        "", "", "", "",
> +               /*  T */ "", "", "", "", "", "", "", "",
> +               /*  U */ "", "", "", "", "", "", "", "",
> +               /*  V */ "", "", "", "", "", "", "", "",
> +               /*  W */ "", "", "", "", "", "", "", "",
> +               /*  X */ "", "", "", "", "", "", "", "",
> +               /*  Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
> +                       "", "", "", "",
> +               /*  Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
> +                       "", "", "", "",
> +               /* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
> +                       "FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
> +                       "", "IRQ_SML0_ALERT_MUX_N",
> +                       "IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
> +               /* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
> +                       "ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
> +                       "", "", "", "",
> +               /* AC */ "", "", "", "", "", "", "", "";
> +};
> +
> +&adc {
> +       status = "okay";
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
> +               &pinctrl_adc1_default      /* 5VSB */
> +               &pinctrl_adc2_default      /* CPU1 */
> +               &pinctrl_adc3_default      /* NC */
> +               &pinctrl_adc4_default      /* VCCMABCD */
> +               &pinctrl_adc5_default      /* VCCMEFGH */
> +               &pinctrl_adc6_default      /* NC */
> +               &pinctrl_adc7_default      /* NC */
> +               &pinctrl_adc8_default      /* PVNN_PCH */
> +               &pinctrl_adc9_default      /* 1P05PCH */
> +               &pinctrl_adc10_default     /* 1P8PCH */
> +               &pinctrl_adc11_default     /* BAT */
> +               &pinctrl_adc12_default     /* 3V */
> +               &pinctrl_adc13_default     /* 5V */
> +               &pinctrl_adc14_default     /* 12V */
> +               &pinctrl_adc15_default>;   /* GND */
> +};
> --
> 2.42.0
>


More information about the Linux-aspeed mailing list