[PATCH RESEND v10 2/3] dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control

[Billy Tsai]

> > > > Document the compatible for aspeed,ast2600-pwm-tach device, which can
> > > > support up to 16 PWM outputs and 16 fan tach input.
> > > >
> > > > Signed-off-by: Billy Tsai <billy_tsai at aspeedtech.com>
> > > > ---
> > > >  .../bindings/hwmon/aspeed,g6-pwm-tach.yaml    | 69 +++++++++++++++++++
> > > >  1 file changed, 69 insertions(+)
> > > >  create mode 100644 Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> > > > new file mode 100644
> > > > index 000000000000..c615fb10705c
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml
> > > > @@ -0,0 +1,69 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +# Copyright (C) 2023 Aspeed, Inc.
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/hwmon/aspeed,g6-pwm-tach.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: ASPEED G6 PWM and Fan Tach controller
> > > > +
> > > > +maintainers:
> > > > +  - Billy Tsai <billy_tsai at aspeedtech.com>
> > > > +
> > > > +description: |
> > > > +  The ASPEED PWM controller can support up to 16 PWM outputs.
> > > > +  The ASPEED Fan Tacho controller can support up to 16 fan tach input.
> > > > +  They are independent hardware blocks, which are different from the
> > > > +  previous version of the ASPEED chip.
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    enum:
> > > > +      - aspeed,ast2600-pwm-tach
> > > > +
> > > > +  reg:
> > > > +    maxItems: 1
> > > > +
> > > > +  clocks:
> > > > +    maxItems: 1
> > > > +
> > > > +  resets:
> > > > +    maxItems: 1
> > > > +
> > > > +  "#pwm-cells":
> > > > +    const: 3
> > > > +
> > > > +patternProperties:
> > > > +  "^fan-[0-9]+$":
> > > > +    $ref: fan-common.yaml#
> > > > +    unevaluatedProperties: false
> > > > +    required:
> > > > +      - tach-ch
> > > > +
> > > > +required:
> > > > +  - reg
> > > > +  - clocks
> > > > +  - resets
> > > > +  - "#pwm-cells"
> > > > +  - compatible
> > > > +
> > > > +additionalProperties: false
> > > > +
> > > > +examples:
> > > > +  - |
> > > > +    #include <dt-bindings/clock/aspeed-clock.h>
> > > > +    pwm_tach: pwm-tach-controller at 1e610000 {
> > > > +      compatible = "aspeed,ast2600-pwm-tach";
> > > > +      reg = <0x1e610000 0x100>;
> > > > +      clocks = <&syscon ASPEED_CLK_AHB>;
> > > > +      resets = <&syscon ASPEED_RESET_PWM>;
> > > > +      #pwm-cells = <3>;
> > > > +
> > > > +      fan-0 {
> >
> > > I assume there's a PWM connection here? How do you know which PWM? You
> > > said the tach channel is independent, so it is not that.
> >
> > > It should not be 0 from 'fan-0' because that's just a meaningless index.
> >
> > > You either need 'pwms' here or you can use 'reg' and the reg value is
> > > the PWM channel.
> >
> > Hi Rob, this binding is used to export the PWM provider and the Fan monitor (i.e., Tach).
> > If the user wants to add the PWM connection for the fan, it can be done as follows:
> >
> > fan0: pwm-fan0 {
> >         compatible = "pwm-fan";
> >         pwms = <&pwm_tach 0 40000 0>;
> >         cooling-min-state = <0>;
> >         cooling-max-state = <3>;
> >         #cooling-cells = <2>;
> >         cooling-levels = <0 15 128 255>;
> > };
> >
> > This will reuse the existing PWM fan driver (e.g., pwm-fan.c).

> I'm confused now. So what are the child nodes you have? You are
> defining the fan in 2 places? The "pwm-fan" driver supports a tach via
> an interrupt, so how would this work in your case?

Hi Rob,

The tach interrupt for the pwm-fan is option. In our case, the dts just reuse the pwm control function
of the pwm-fan, and the part of the tach monitor will be created by our fan child nodes.
So the dts will like followings:

// Use to declare the tach monitor for fan.
&pwm_tach {
        fan-0 {
		tach-ch = /bits/ 8 <0x0>;
	};
	fan-1 {
		tach-ch = /bits/ 8 <0x1>;
	};
        ...
}

// Reuse the pwm-fan.c to control the behavior of the PWM for fan.
fan0: pwm-fan0 {
        compatible = "pwm-fan";
        pwms = <&pwm_tach 0 40000 0>;   /* Target freq:25 kHz */
        cooling-min-state = <0>;
        cooling-max-state = <3>;
        #cooling-cells = <2>;
        cooling-levels = <0 15 128 255>;
};

fan1: pwm-fan1 {
        compatible = "pwm-fan";
        pwms = <&pwm_tach 1 40000 0>;   /* Target freq:25 kHz */
        cooling-min-state = <0>;
        cooling-max-state = <3>;
        #cooling-cells = <2>;
        cooling-levels = <0 15 128 255>;
};

Thanks