[PATCH v8 1/2] dt-bindings: i2c: aspeed: support for AST2600-i2cv2

Ryan Chen ryan_chen at aspeedtech.com
Mon Apr 3 10:46:11 AEST 2023


Hello Krzysztof,

> On 30/03/2023 09:32, Ryan Chen wrote:
> > Fix typo in maintainer's name and email.
> > Remove ddress-cells, size-cells.
> 
> Typo: address?
> 
> > Use Compatible and reg are always first properties.
> 
> I don't understand this at all - what does it explain here? It looks unrelated, just
> random sentence in the middle of commit msg.
> 
> > Add ast2600-i2cv2 compatible and aspeed,global-regs, aspeed,enable-dma
> > and description for ast2600-i2cv2.
> >
> > Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> > ---
> >  .../devicetree/bindings/i2c/aspeed,i2c.yaml   | 56 +++++++++++++++++--
> >  1 file changed, 50 insertions(+), 6 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > index f597f73ccd87..81e8ced64900 100644
> > --- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > +++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
> > @@ -7,10 +7,7 @@ $schema:
> > http://devicetree.org/meta-schemas/core.yaml#
> >  title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device
> > Tree Bindings
> >
> >  maintainers:
> > -  - Rayn Chen <rayn_chen at aspeedtech.com>
> > -
> > -allOf:
> > -  - $ref: /schemas/i2c/i2c-controller.yaml#
> > +  - Ryan Chen <ryan_chen at aspeedtech.com>
> >
> >  properties:
> >    compatible:
> > @@ -49,6 +46,25 @@ properties:
> >      description:
> >        states that there is another master active on this bus
> >
> > +  aspeed,enable-dma:
> > +    type: boolean
> > +    description: |
> > +      I2C bus enable dma mode transfer.
> > +
> > +      ASPEED ast2600 platform equipped with 16 I2C controllers that
> share a
> > +      single DMA engine. DTS files can specify the data transfer mode
> to/from
> > +      the device, either DMA or programmed I/O. However, hardware
> limitations
> > +      may require a DTS to manually allocate which controller can use
> DMA mode.
> > +      The "aspeed,enable-dma" property allows control of this.
> > +
> > +      In cases where one the hardware design results in a specific
> > +      controller handling a larger amount of data, a DTS would likely
> > +      enable DMA mode for that one controller.
> > +
> > +  aspeed,global-regs:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: The phandle of i2c global register node.
> > +
> >  required:
> >    - reg
> >    - compatible
> > @@ -57,12 +73,30 @@ required:
> >
> >  unevaluatedProperties: false
> >
> > +allOf:
> > +  - $ref: /schemas/i2c/i2c-controller.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: aspeed,ast2600-i2cv2
> > +
> > +    then:
> > +      properties:
> > +        reg:
> > +          minItems: 2
> > +      required:
> > +        - aspeed,global-regs
> > +    else:
> > +      properties:
> > +        aspeed,global-regs: false
> > +        aspeed,enable-dma: false
> > +
> > +
> >  examples:
> >    - |
> >      #include <dt-bindings/clock/aspeed-clock.h>
> >      i2c0: i2c-bus at 40 {
> > -      #address-cells = <1>;
> > -      #size-cells = <0>;
> 
> Why? Indeed without children this is not really needed, but it points to the fact
> that your example without children is not entirely complete.
> 
> Anyway you are doing now way too many things in one patch.
> 
> https://elixir.bootlin.com/linux/v5.19-rc5/source/Documentation/process/subm
> itting-patches.rst
> 
Understood, I will keep simple for this patch.
Focus on add support ast2600-i2cv2 patch.
Others typo fix will be another patch.

Thanks
Ryan Chen.


> >        compatible = "aspeed,ast2500-i2c-bus";
> >        reg = <0x40 0x40>;
> >        clocks = <&syscon ASPEED_CLK_APB>; @@ -71,3 +105,13 @@
> > examples:
> >        interrupts = <0>;
> >        interrupt-parent = <&i2c_ic>;
> >      };
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    i2c1: i2c at 80 {
> > +      compatible = "aspeed,ast2600-i2cv2";
> > +      reg = <0x80 0x80>, <0xc00 0x20>;
> > +      aspeed,global-regs = <&i2c_global>;
> > +      clocks = <&syscon ASPEED_CLK_APB>;
> > +      resets = <&syscon ASPEED_RESET_I2C>;
> > +      interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
> > +    };
> 
> Best regards,
> Krzysztof



More information about the Linux-aspeed mailing list