[PATCH v3 1/3] mmc: davinci_mmc: add DT support

Mark Rutland mark.rutland at arm.com
Tue Feb 12 22:00:48 EST 2013


Hi Prakash,

I think this looks pretty good now :)

Reviewed-by: Mark Rutland <mark.rutland at arm.com>

Thanks,
Mark.

On Tue, Feb 12, 2013 at 06:37:36AM +0000, Manjunathappa, Prakash wrote:
> Adds device tree support for davinci_mmc. Also add binding documentation.
> As of now in non-dma PIO mode and without GPIO card_detect/write_protect
> option because of dependencies on EDMA and GPIO module DT support.
> 
> Signed-off-by: Manjunathappa, Prakash <prakash.pm at ti.com>
> Cc: linux-mmc at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: davinci-linux-open-source at linux.davincidsp.com
> Cc: devicetree-discuss at lists.ozlabs.org
> Cc: cjb at laptop.org
> Cc: Sekhar Nori <nsekhar at ti.com>
> Cc: mporter at ti.com
> ---
> Since v2:
> Modified the default value for bus-width and removed the support for
> highspeed card capabilties for now.
> Since v1:
> Modified DT parse function to take default values and accomodate controller
> version in compatible field.
> 
>  .../devicetree/bindings/mmc/davinci_mmc.txt        |   25 ++++++++
>  drivers/mmc/host/davinci_mmc.c                     |   65 +++++++++++++++++++-
>  2 files changed, 88 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/davinci_mmc.txt
> 
> diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
> new file mode 100644
> index 0000000..247be0f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt
> @@ -0,0 +1,25 @@
> +* TI Highspeed MMC host controller for DaVinci
> +
> +The Highspeed MMC Host Controller on TI DaVinci family
> +provides an interface for MMC, SD and SDIO types of memory cards.
> +
> +This file documents the properties used by the davinci_mmc driver.
> +
> +Required properties:
> +- compatible:
> + Should be "ti,davinci-mmc-da830": for da830, da850, dm365
> + Should be "ti,davinci-mmc-dm355": for dm355, dm644x
> +
> +Optional properties:
> +- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1>
> +- max-frequency: Maximum operating clock frequency, default 25MHz.
> +
> +Example:
> +	mmc0: mmc at 1c40000 {
> +		compatible = "ti,davinci-mmc-da830",
> +		reg = <0x40000 0x1000>;
> +		interrupts = <16>;
> +		status = "okay";
> +		bus-width = <4>;
> +		max-frequency = <50000000>;
> +	};
> diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
> index 27123f8..66ca6bf 100644
> --- a/drivers/mmc/host/davinci_mmc.c
> +++ b/drivers/mmc/host/davinci_mmc.c
> @@ -34,6 +34,8 @@
>  #include <linux/dma-mapping.h>
>  #include <linux/edma.h>
>  #include <linux/mmc/mmc.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  
>  #include <linux/platform_data/mmc-davinci.h>
>  
> @@ -1157,16 +1159,74 @@ static void __init init_mmcsd_host(struct mmc_davinci_host *host)
>  	mmc_davinci_reset_ctrl(host, 0);
>  }
>  
> -static int __init davinci_mmcsd_probe(struct platform_device *pdev)
> +static const struct of_device_id davinci_mmc_dt_ids[] = {
> +	{
> +		.compatible = "ti,davinci-mmc-dm355",
> +		.data = (void *)MMC_CTLR_VERSION_1,
> +	},
> +	{
> +		.compatible = "ti,davinci-mmc-da830",
> +		.data = (void *)MMC_CTLR_VERSION_2,
> +	},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, davinci_mmc_dt_ids);
> +
> +static struct davinci_mmc_config
> +	*mmc_parse_pdata(struct platform_device *pdev)
>  {
> +	struct device_node *np;
>  	struct davinci_mmc_config *pdata = pdev->dev.platform_data;
> +	const struct of_device_id *match =
> +		of_match_device(of_match_ptr(davinci_mmc_dt_ids), &pdev->dev);
> +	u32 data;
> +
> +	np = pdev->dev.of_node;
> +	if (!np)
> +		return pdata;
> +
> +	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (!pdata) {
> +		dev_err(&pdev->dev, "Failed to allocate memory for struct davinci_mmc_config\n");
> +		goto nodata;
> +	}
> +
> +	if (match->data)
> +		pdata->version = (u8)((int)match->data);
> +
> +	of_property_read_u32(np, "max-frequency", &pdata->max_freq);
> +	if (!pdata->max_freq)
> +		dev_info(&pdev->dev, "'max-frequency' property not specified, defaulting to 25MHz\n");
> +
> +	of_property_read_u32(np, "bus-width", &data);
> +	switch (data) {
> +	case 1:
> +	case 4:
> +	case 8:
> +		pdata->wires = data;
> +		break;
> +	default:
> +		pdata->wires = 1;
> +		dev_info(&pdev->dev, "Unsupported buswidth, defaulting to 1 bit\n");
> +	}
> +nodata:
> +	return pdata;
> +}
> +
> +static int __init davinci_mmcsd_probe(struct platform_device *pdev)
> +{
> +	struct davinci_mmc_config *pdata = NULL;
>  	struct mmc_davinci_host *host = NULL;
>  	struct mmc_host *mmc = NULL;
>  	struct resource *r, *mem = NULL;
>  	int ret = 0, irq = 0;
>  	size_t mem_size;
>  
> -	/* REVISIT:  when we're fully converted, fail if pdata is NULL */
> +	pdata = mmc_parse_pdata(pdev);
> +	if (pdata == NULL) {
> +		dev_err(&pdev->dev, "Can not get platform data\n");
> +		return -ENOENT;
> +	}
>  
>  	ret = -ENODEV;
>  	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> @@ -1408,6 +1468,7 @@ static struct platform_driver davinci_mmcsd_driver = {
>  		.name	= "davinci_mmc",
>  		.owner	= THIS_MODULE,
>  		.pm	= davinci_mmcsd_pm_ops,
> +		.of_match_table = of_match_ptr(davinci_mmc_dt_ids),
>  	},
>  	.remove		= __exit_p(davinci_mmcsd_remove),
>  };
> -- 
> 1.7.4.1
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
> 



More information about the devicetree-discuss mailing list