[PATCH v3 2/2] video: imxfb: Add DT support

Markus Pargmann mpa at pengutronix.de
Mon Apr 15 00:31:32 EST 2013


On Mon, Apr 08, 2013 at 09:57:42AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 12:31 Fri 05 Apr     , Markus Pargmann wrote:
> > Add devicetree support for imx framebuffer driver. It uses the generic
> > display bindings and helper functions.
> > 
> > Signed-off-by: Markus Pargmann <mpa at pengutronix.de>
> > Cc: Fabio Estevam <festevam at gmail.com>
> > Cc: Mark Rutland <mark.rutland at arm.com>
> > ---
> >  .../devicetree/bindings/video/fsl,imx-fb.txt       |  49 ++++++
> >  drivers/video/imxfb.c                              | 192 +++++++++++++++++----
> >  2 files changed, 207 insertions(+), 34 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > new file mode 100644
> > index 0000000..bde9c77
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > @@ -0,0 +1,49 @@
> > +Freescale imx21 Framebuffer
> > +
> > +This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
> > +
> > +Required properties:
> > +- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
> > +- reg : Should contain 1 register ranges(address and length)
> > +- interrupts : One interrupt of the fb dev
> > +
> > +Required nodes:
> > +- display: Phandle to a display node as described in
> > +	Documentation/devicetree/bindings/video/display-timing.txt
> > +	Additional, the display node has to define properties:
> > +	- fsl,bpp: Bits per pixel
> > +	- fsl,pcr: LCDC PCR value
> > +
> > +Optional properties:
> > +- dmacr-eukrea: Should be set for eukrea boards.
> why ?

Because eukrea boards have a different dmacr then all other boards using
imxfb. The dmacr address is hardcoded as defaults in the code. I could
also search for the board name in the DT, but there are no eukrea boards
with DT at the moment, so I thought a bool property may be better for
the moment.

> 
> and This should be prefix by yhe Vendor here Eukrea

Okay.

Regards,

Markus

> > +
> > +Example:
> > +
> > +	imxfb: fb at 10021000 {
> > +		compatible = "fsl,imx27-fb", "fsl,imx21-fb";
> > +		interrupts = <61>;
> > +		reg = <0x10021000 0x1000>;
> > +		display = <&display0>;
> > +	};
> > +
> > +	...
> > +
> > +	display0: display0 {
> > +		model = "Primeview-PD050VL1";
> > +		native-mode = <&timing_disp0>;
> > +		fsl,bpp = <16>;		/* non-standard but required */
> > +		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
> > +		display-timings {
> > +			timing_disp0: 640x480 {
> > +				hactive = <640>;
> > +				vactive = <480>;
> > +				hback-porch = <112>;
> > +				hfront-porch = <36>;
> > +				hsync-len = <32>;
> > +				vback-porch = <33>;
> > +				vfront-porch = <33>;
> > +				vsync-len = <2>;
> > +				clock-frequency = <25000000>;
> > +			};
> > +		};
> > +	};
> > diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
> > index ef2b587..5a9bc598 100644
> > --- a/drivers/video/imxfb.c
> > +++ b/drivers/video/imxfb.c
> > @@ -32,6 +32,12 @@
> >  #include <linux/io.h>
> >  #include <linux/math64.h>
> >  #include <linux/uaccess.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +
> > +#include <video/of_display_timing.h>
> > +#include <video/of_videomode.h>
> > +#include <video/videomode.h>
> >  
> >  #include <linux/platform_data/video-imxfb.h>
> >  
> > @@ -117,10 +123,13 @@
> >  #define LGWCR_GWAV(alpha)	(((alpha) & 0xff) << 24)
> >  #define LGWCR_GWE	(1 << 22)
> >  
> > +#define IMXFB_LSCR1_DEFAULT 0x00120300
> > +#define IMXFB_DMACR_DEFAULT 0x00020010
> > +#define IMXFB_DMACR_EUKREA_DEFAULT 0x00040060
> > +
> >  /* Used fb-mode. Can be set on kernel command line, therefore file-static. */
> >  static const char *fb_mode;
> >  
> > -
> >  /*
> >   * These are the bitfields for each
> >   * display depth that we support.
> > @@ -192,6 +201,19 @@ static struct platform_device_id imxfb_devtype[] = {
> >  };
> >  MODULE_DEVICE_TABLE(platform, imxfb_devtype);
> >  
> > +static struct of_device_id imxfb_of_dev_id[] = {
> > +	{
> > +		.compatible = "fsl,imx1-fb",
> > +		.data = &imxfb_devtype[IMX1_FB],
> > +	}, {
> > +		.compatible = "fsl,imx21-fb",
> > +		.data = &imxfb_devtype[IMX21_FB],
> > +	}, {
> > +		/* sentinel */
> > +	}
> > +};
> > +MODULE_DEVICE_TABLE(of, imxfb_of_dev_id);
> > +
> >  static inline int is_imx1_fb(struct imxfb_info *fbi)
> >  {
> >  	return fbi->devtype == IMX1_FB;
> > @@ -324,6 +346,9 @@ static const struct imx_fb_videomode *imxfb_find_mode(struct imxfb_info *fbi)
> >  	struct imx_fb_videomode *m;
> >  	int i;
> >  
> > +	if (!fb_mode)
> > +		return &fbi->mode[0];
> > +
> >  	for (i = 0, m = &fbi->mode[0]; i < fbi->num_modes; i++, m++) {
> >  		if (!strcmp(m->mode.name, fb_mode))
> >  			return m;
> > @@ -479,6 +504,9 @@ static int imxfb_bl_update_status(struct backlight_device *bl)
> >  	struct imxfb_info *fbi = bl_get_data(bl);
> >  	int brightness = bl->props.brightness;
> >  
> > +	if (!fbi->pwmr)
> > +		return 0;
> > +
> >  	if (bl->props.power != FB_BLANK_UNBLANK)
> >  		brightness = 0;
> >  	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
> > @@ -719,7 +747,8 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
> >  
> >  	writel(fbi->pcr, fbi->regs + LCDC_PCR);
> >  #ifndef PWMR_BACKLIGHT_AVAILABLE
> > -	writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
> > +	if (fbi->pwmr)
> > +		writel(fbi->pwmr, fbi->regs + LCDC_PWMR);
> >  #endif
> >  	writel(fbi->lscr1, fbi->regs + LCDC_LSCR1);
> >  	writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
> > @@ -758,13 +787,12 @@ static int imxfb_resume(struct platform_device *dev)
> >  #define imxfb_resume	NULL
> >  #endif
> >  
> > -static int __init imxfb_init_fbinfo(struct platform_device *pdev)
> > +static int imxfb_init_fbinfo(struct platform_device *pdev)
> >  {
> >  	struct imx_fb_platform_data *pdata = pdev->dev.platform_data;
> >  	struct fb_info *info = dev_get_drvdata(&pdev->dev);
> >  	struct imxfb_info *fbi = info->par;
> > -	struct imx_fb_videomode *m;
> > -	int i;
> > +	struct device_node *np;
> >  
> >  	pr_debug("%s\n",__func__);
> >  
> > @@ -795,41 +823,96 @@ static int __init imxfb_init_fbinfo(struct platform_device *pdev)
> >  	info->fbops			= &imxfb_ops;
> >  	info->flags			= FBINFO_FLAG_DEFAULT |
> >  					  FBINFO_READS_FAST;
> > -	info->var.grayscale		= pdata->cmap_greyscale;
> > -	fbi->cmap_inverse		= pdata->cmap_inverse;
> > -	fbi->cmap_static		= pdata->cmap_static;
> > -	fbi->lscr1			= pdata->lscr1;
> > -	fbi->dmacr			= pdata->dmacr;
> > -	fbi->pwmr			= pdata->pwmr;
> > -	fbi->lcd_power			= pdata->lcd_power;
> > -	fbi->backlight_power		= pdata->backlight_power;
> > -
> > -	for (i = 0, m = &pdata->mode[0]; i < pdata->num_modes; i++, m++)
> > -		info->fix.smem_len = max_t(size_t, info->fix.smem_len,
> > -				m->mode.xres * m->mode.yres * m->bpp / 8);
> > +	if (pdata) {
> > +		info->var.grayscale		= pdata->cmap_greyscale;
> > +		fbi->cmap_inverse		= pdata->cmap_inverse;
> > +		fbi->cmap_static		= pdata->cmap_static;
> > +		fbi->lscr1			= pdata->lscr1;
> > +		fbi->dmacr			= pdata->dmacr;
> > +		fbi->pwmr			= pdata->pwmr;
> > +		fbi->lcd_power			= pdata->lcd_power;
> > +		fbi->backlight_power		= pdata->backlight_power;
> > +	} else {
> > +		np = pdev->dev.of_node;
> > +		info->var.grayscale = of_property_read_bool(np,
> > +						"cmap-greyscale");
> > +		fbi->cmap_inverse = of_property_read_bool(np, "cmap-inverse");
> > +		fbi->cmap_static = of_property_read_bool(np, "cmap-static");
> > +
> > +		fbi->lscr1 = IMXFB_LSCR1_DEFAULT;
> > +		if (of_property_read_bool(np, "dmacr-eukrea"))
> > +			fbi->dmacr = IMXFB_DMACR_EUKREA_DEFAULT;
> > +		else
> > +			fbi->dmacr = IMXFB_DMACR_DEFAULT;
> > +
> > +		/* These two function pointers could be used by some specific
> > +		 * platforms. */
> > +		fbi->lcd_power = NULL;
> > +		fbi->backlight_power = NULL;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int imxfb_of_read_mode(struct device *dev, struct device_node *np,
> > +		struct imx_fb_videomode *imxfb_mode)
> > +{
> > +	int ret;
> > +	struct fb_videomode *of_mode = &imxfb_mode->mode;
> > +	u32 bpp;
> > +	u32 pcr;
> > +
> > +	ret = of_property_read_string(np, "model", &of_mode->name);
> > +	if (ret)
> > +		of_mode->name = NULL;
> > +
> > +	ret = of_get_fb_videomode(np, of_mode, OF_USE_NATIVE_MODE);
> > +	if (ret) {
> > +		dev_err(dev, "Failed to get videomode from DT\n");
> > +		return ret;
> > +	}
> > +
> > +	ret = of_property_read_u32(np, "fsl,bpp", &bpp);
> > +	ret |= of_property_read_u32(np, "fsl,pcr", &pcr);
> > +
> > +	if (ret) {
> > +		dev_err(dev, "Failed to read bpp and pcr from DT\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (bpp < 1 || bpp > 255) {
> > +		dev_err(dev, "Bits per pixel have to be between 1 and 255\n");
> > +		return -EINVAL;
> > +	}
> > +
> > +	imxfb_mode->bpp = bpp;
> > +	imxfb_mode->pcr = pcr;
> >  
> >  	return 0;
> >  }
> >  
> > -static int __init imxfb_probe(struct platform_device *pdev)
> > +static int imxfb_probe(struct platform_device *pdev)
> >  {
> >  	struct imxfb_info *fbi;
> >  	struct fb_info *info;
> >  	struct imx_fb_platform_data *pdata;
> >  	struct resource *res;
> > +	struct imx_fb_videomode *m;
> > +	const struct of_device_id *of_id;
> >  	int ret, i;
> > +	int bytes_per_pixel;
> >  
> >  	dev_info(&pdev->dev, "i.MX Framebuffer driver\n");
> >  
> > +	of_id = of_match_device(imxfb_of_dev_id, &pdev->dev);
> > +	if (of_id)
> > +		pdev->id_entry = of_id->data;
> > +
> >  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >  	if (!res)
> >  		return -ENODEV;
> >  
> >  	pdata = pdev->dev.platform_data;
> > -	if (!pdata) {
> > -		dev_err(&pdev->dev,"No platform_data available\n");
> > -		return -ENOMEM;
> > -	}
> >  
> >  	info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev);
> >  	if (!info)
> > @@ -837,15 +920,55 @@ static int __init imxfb_probe(struct platform_device *pdev)
> >  
> >  	fbi = info->par;
> >  
> > -	if (!fb_mode)
> > -		fb_mode = pdata->mode[0].mode.name;
> > -
> >  	platform_set_drvdata(pdev, info);
> >  
> >  	ret = imxfb_init_fbinfo(pdev);
> >  	if (ret < 0)
> >  		goto failed_init;
> >  
> > +	if (pdata) {
> > +		if (!fb_mode)
> > +			fb_mode = pdata->mode[0].mode.name;
> > +
> > +		fbi->mode = pdata->mode;
> > +		fbi->num_modes = pdata->num_modes;
> > +	} else {
> > +		struct device_node *display_np;
> > +		fb_mode = NULL;
> > +
> > +		display_np = of_parse_phandle(pdev->dev.of_node, "display", 0);
> > +		if (!display_np) {
> > +			dev_err(&pdev->dev, "No display defined in devicetree\n");
> > +			ret = -EINVAL;
> > +			goto failed_of_parse;
> > +		}
> > +
> > +		/*
> > +		 * imxfb does not support more modes, we choose only the native
> > +		 * mode.
> > +		 */
> > +		fbi->num_modes = 1;
> > +
> > +		fbi->mode = devm_kzalloc(&pdev->dev,
> > +				sizeof(struct imx_fb_videomode), GFP_KERNEL);
> > +		if (!fbi->mode) {
> > +			ret = -ENOMEM;
> > +			goto failed_of_parse;
> > +		}
> > +
> > +		ret = imxfb_of_read_mode(&pdev->dev, display_np, fbi->mode);
> > +		if (ret)
> > +			goto failed_of_parse;
> > +	}
> > +
> > +	/* Calculate maximum bytes used per pixel. In most cases this should
> > +	 * be the same as m->bpp/8 */
> > +	m = &fbi->mode[0];
> > +	bytes_per_pixel = (m->bpp + 7) / 8;
> > +	for (i = 0; i < fbi->num_modes; i++, m++)
> > +		info->fix.smem_len = max_t(size_t, info->fix.smem_len,
> > +				m->mode.xres * m->mode.yres * bytes_per_pixel);
> > +
> >  	res = request_mem_region(res->start, resource_size(res),
> >  				DRIVER_NAME);
> >  	if (!res) {
> > @@ -878,7 +1001,8 @@ static int __init imxfb_probe(struct platform_device *pdev)
> >  		goto failed_ioremap;
> >  	}
> >  
> > -	if (!pdata->fixed_screen_cpu) {
> > +	/* Seems not being used by anyone, so no support for oftree */
> > +	if (!pdata || !pdata->fixed_screen_cpu) {
> >  		fbi->map_size = PAGE_ALIGN(info->fix.smem_len);
> >  		fbi->map_cpu = dma_alloc_writecombine(&pdev->dev,
> >  				fbi->map_size, &fbi->map_dma, GFP_KERNEL);
> > @@ -903,18 +1027,16 @@ static int __init imxfb_probe(struct platform_device *pdev)
> >  		info->fix.smem_start = fbi->screen_dma;
> >  	}
> >  
> > -	if (pdata->init) {
> > +	if (pdata && pdata->init) {
> >  		ret = pdata->init(fbi->pdev);
> >  		if (ret)
> >  			goto failed_platform_init;
> >  	}
> >  
> > -	fbi->mode = pdata->mode;
> > -	fbi->num_modes = pdata->num_modes;
> >  
> >  	INIT_LIST_HEAD(&info->modelist);
> > -	for (i = 0; i < pdata->num_modes; i++)
> > -		fb_add_videomode(&pdata->mode[i].mode, &info->modelist);
> > +	for (i = 0; i < fbi->num_modes; i++)
> > +		fb_add_videomode(&fbi->mode[i].mode, &info->modelist);
> >  
> >  	/*
> >  	 * This makes sure that our colour bitfield
> > @@ -944,10 +1066,10 @@ static int __init imxfb_probe(struct platform_device *pdev)
> >  failed_register:
> >  	fb_dealloc_cmap(&info->cmap);
> >  failed_cmap:
> > -	if (pdata->exit)
> > +	if (pdata && pdata->exit)
> >  		pdata->exit(fbi->pdev);
> >  failed_platform_init:
> > -	if (!pdata->fixed_screen_cpu)
> > +	if (pdata && !pdata->fixed_screen_cpu)
> >  		dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu,
> >  			fbi->map_dma);
> >  failed_map:
> > @@ -956,6 +1078,7 @@ failed_ioremap:
> >  failed_getclock:
> >  	release_mem_region(res->start, resource_size(res));
> >  failed_req:
> > +failed_of_parse:
> >  	kfree(info->pseudo_palette);
> >  failed_init:
> >  	platform_set_drvdata(pdev, NULL);
> > @@ -980,7 +1103,7 @@ static int imxfb_remove(struct platform_device *pdev)
> >  	unregister_framebuffer(info);
> >  
> >  	pdata = pdev->dev.platform_data;
> > -	if (pdata->exit)
> > +	if (pdata && pdata->exit)
> >  		pdata->exit(fbi->pdev);
> >  
> >  	fb_dealloc_cmap(&info->cmap);
> > @@ -1009,6 +1132,7 @@ static struct platform_driver imxfb_driver = {
> >  	.shutdown	= imxfb_shutdown,
> >  	.driver		= {
> >  		.name	= DRIVER_NAME,
> > +		.of_match_table = imxfb_of_dev_id,
> >  	},
> >  	.id_table	= imxfb_devtype,
> >  };
> > -- 
> > 1.8.1.5
> > 
> > _______________________________________________
> > devicetree-discuss mailing list
> > devicetree-discuss at lists.ozlabs.org
> > https://lists.ozlabs.org/listinfo/devicetree-discuss
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


More information about the devicetree-discuss mailing list