From: Masashi Kimoto Fix the black and white stripes issue with WUXGA monitor via HDMI. It seems that when we use a VESA resolution from boot up, the AV settings driver could not be initialized correctly. In that case we need a dummy packet before VESA setting. [Geert] Refactored to reduce code duplication. Signed-off-by: Geert Uytterhoeven CC: Geoff Levand --- drivers/ps3/ps3av.c | 58 ++++++++++++++++++++++++++++++++++------------------ 1 files changed, 38 insertions(+), 20 deletions(-) --- a/drivers/ps3/ps3av.c +++ b/drivers/ps3/ps3av.c @@ -491,10 +491,10 @@ static int ps3av_set_videomode(void) return 0; } -static void ps3av_set_videomode_cont(u32 id, u32 old_id) +static void ps3av_set_videomode_packet(u32 id) { struct ps3av_pkt_avb_param avb_param; - int i; + unsigned int i; u32 len = 0, av_video_cs; const struct avset_video_mode *video_mode; int res; @@ -507,24 +507,6 @@ static void ps3av_set_videomode_cont(u32 ps3av->av_hw_conf.num_of_avmulti; avb_param.num_of_av_audio_pkt = 0; - /* video signal off */ - ps3av_set_video_disable_sig(); - - /* Retail PS3 product doesn't support this */ - if (id & PS3AV_MODE_HDCP_OFF) { - res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_HDCP_OFF); - if (res == PS3AV_STATUS_UNSUPPORTED_HDMI_MODE) - dev_dbg(&ps3av->dev->core, "Not supported\n"); - else if (res) - dev_dbg(&ps3av->dev->core, - "ps3av_cmd_av_hdmi_mode failed\n"); - } else if (old_id & PS3AV_MODE_HDCP_OFF) { - res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_MODE_NORMAL); - if (res < 0 && res != PS3AV_STATUS_UNSUPPORTED_HDMI_MODE) - dev_dbg(&ps3av->dev->core, - "ps3av_cmd_av_hdmi_mode failed\n"); - } - /* video_pkt */ for (i = 0; i < avb_param.num_of_video_pkt; i++) len += ps3av_cmd_set_video_mode(&avb_param.buf[len], @@ -555,6 +537,42 @@ static void ps3av_set_videomode_cont(u32 __func__); else if (res) dev_dbg(&ps3av->dev->core, "ps3av_cmd_avb_param failed\n"); +} + +static void ps3av_set_videomode_cont(u32 id, u32 old_id) +{ + static int vesa; + int res; + + /* video signal off */ + ps3av_set_video_disable_sig(); + + /* + * AV backend needs non-VESA mode setting at least one time + * when VESA mode is used. + */ + if (vesa == 0 && (id & PS3AV_MODE_MASK) >= 11) { + /* vesa mode */ + ps3av_set_videomode_packet(2); /* 480P */ + } + vesa = 1; + + /* Retail PS3 product doesn't support this */ + if (id & PS3AV_MODE_HDCP_OFF) { + res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_HDCP_OFF); + if (res == PS3AV_STATUS_UNSUPPORTED_HDMI_MODE) + dev_dbg(&ps3av->dev->core, "Not supported\n"); + else if (res) + dev_dbg(&ps3av->dev->core, + "ps3av_cmd_av_hdmi_mode failed\n"); + } else if (old_id & PS3AV_MODE_HDCP_OFF) { + res = ps3av_cmd_av_hdmi_mode(PS3AV_CMD_AV_HDMI_MODE_NORMAL); + if (res < 0 && res != PS3AV_STATUS_UNSUPPORTED_HDMI_MODE) + dev_dbg(&ps3av->dev->core, + "ps3av_cmd_av_hdmi_mode failed\n"); + } + + ps3av_set_videomode_packet(id); msleep(1500); /* av video mute */ -- With kind regards, Geert Uytterhoeven Software Architect Sony Network and Software Technology Center Europe The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium Phone: +32 (0)2 700 8453 Fax: +32 (0)2 700 8622 E-mail: Geert.Uytterhoeven@sonycom.com Internet: http://www.sony-europe.com/ Sony Network and Software Technology Center Europe A division of Sony Service Centre (Europe) N.V. Registered office: Technologielaan 7 · B-1840 Londerzeel · Belgium VAT BE 0413.825.160 · RPR Brussels Fortis Bank Zaventem · Swift GEBABEBB08A · IBAN BE39001382358619